BRIGHT LED ELECTRONICS CORP. BT-A534RD SINCE 1981 ● 1. Features : ● Package Dimensions : 0.52 inch (13.20mm) Digit Height. 7.6(.299) 8 2. Continuous uniform segments. 3. Low power requirement. 4. Excellent characters appearance. 5. Solid state reliability. 6. Categorized for luminous intensity. 7. Direct drive common anode. 13.20(.520) 17.40(.685) 12.7x2=25.4(1.00) 37.7(1.484) 1.6(.063) 15.10(.594) 0.9(.035) 6.9(.272) 0.50(.020) 3.00(.118) MIN. 2.5x14=35.0(1.380) ● 1. Description : The BT-A534RD is a 13.2 mm (0.52") high three digit seven segments display. 2. This product use hi-eff red chips, which are made from GaAsP on GaP substrate. 3. This product have a black face and Notes: 1. All dimensions are in millimeters(inches). 2. Tolerance is ±0.25mm(.01")unless otherwise specified. 3. Specifications are subject to change without notice. white segments. ● Internal Circuit Diagram : 佰鴻工業股份有限公司 http://www.brtled.com Ver.1.0 Page 1 of 3 BRIGHT LED ELECTRONICS CORP. BT-A534RD SINCE 1981 ● Absolute Maximum Ratings(Ta=25℃) Parameter Symbol Rating Unit Power Dissipation Per Segment Pd 80 mW Forward Current Per Segment IF 30 mA IFP (Duty 1/10, 1KHZ) 150 mA VR 5 V Operating Temperature Topr -40℃~80℃ - Storage Temperature Tstg -40℃~85℃ - Soldering Temperature (1/16" From Body) Tsol 260℃ For 5 Seconds - Peak Forward Current Per Segment Reverse Voltage Per Segment ● Electrical And Optical Characteristics(Ta=25℃) Parameter Symbol Condition Min. Typ. Max. Unit Forward Voltage Per Segment Vf IF=10mA - 1.9 2.5 V Luminous Intensity Per Segment Iv IF=10mA - 3.0 - mcd Reverse Current Per Segment IR VR=5V - - 100 µA Peak Wave Length λp IF=10mA - 640 - nm Dominant Wave Length λd IF=10mA 626 - 636 nm Spectral Line Half-width ∆λ IF=10mA - 40 - nm 佰鴻工業股份有限公司 http://www.brtled.com Ver.1.0 Page 2 of 3 BRIGHT LED ELECTRONICS CORP. BT-A534RD SINCE 1981 Typical Electro-Optical Characteristics Curves (25℃ Ambient Temperature Unless Otherwise Noted) Fig.1 Relative Radiant Intensity VS. Wavelength Relative Radiant Intensity 1.0 0.5 0 560 590 620 Fig.2 Forward Current VS. Forward Voltage 40 30 20 10 0 650 Wavelength(nm) Relative Luminous Intensity (@20mA) Forward Current (mA) 50 0 1 2 3 4 5 3.0 680 3.0 710 740 Fig.3 Relative Luminous Intensity VS. Ambient Temperature 2.5 2.0 1.5 1.0 0.5 0 -40 -20 0 20 40 60 Ambient Temperature Ta( C) Forward Voltage (V) Fig.4 Relative Luminous Intensity VS. Forward Current 50 Fig.5 Forward Current Derating Curve VS. Ambient Temperature 佰鴻工業股份有限公司 http://www.brtled.com Forward Current(mA) Relative Luminous Intensity (@20mA) ● 2.0 1.0 0.0 0 10 20 30 40 Forward Current(mA) 50 40 30 20 10 0 0 20 40 60 80 100 120 Ambient Temperature Ta( C) Ver.1.0 Page 3 of 3