CAMBION Wearnes Cambion LTD Castleton, Hope Valley, Derbyshire, S33 8WR, England Telephone: +44(0)1433 621555 Fax: +44(0)1433 621290 Web: www.cambion.com Email: [email protected] Technical Data Sheet 555-8068 Surface mount power inductors, 9mm, 10µΗ thru 1000µH How to order code 555-8068-XXX-Y-ZZ Basic Part No XXX = Inductance identifier, Y = tolerance, ZZ = packaging Basic Part Number (XXX)-100 -120 -150 -180 -220 -270 -330 -390 -470 555-8068 -560 -680 -820 -101 -121 -151 -181 -221 -271 -331 ELECTRICAL SPECIFICATIONS Inductance DCR (max) Frequency (MHz) (µΗ) (Ω) 10 2.52 0.06 12 2.52 0.07 15 2.52 0.08 18 2.52 0.09 22 2.52 0.10 27 2.52 0.11 33 2.52 0.12 39 2.52 0.14 47 2.52 0.17 56 2.52 0.19 68 2.52 0.22 82 2.52 0.25 100 1KHz 0.35 120 1KHz 0.40 150 1KHz 0.47 180 1KHz 0.63 220 1KHz 0.73 270 1KHz 0.97 330 1KHz 1.15 Copyright Cambion Thursday, 20 February 2003 IDC (max) (A) 2.60 2.45 2.27 2.15 1.95 1.76 1.56 1.37 1.28 1.17 1.11 1.00 0.97 0.89 0.78 0.72 0.66 0.57 0.52 Page 1 of 2 CAMBION Wearnes Cambion LTD Castleton, Hope Valley, Derbyshire, S33 8WR, England Telephone: +44(0)1433 621555 Fax: +44(0)1433 621290 Web: www.cambion.com Email: [email protected] Technical Data Sheet Basic Part Number (XXX)-391 -471 -561 555-8068 -681 -821 -102 ELECTRICAL SPECIFICATIONS Inductance DCR (max) Frequency (MHz) (µΗ) (Ω) 390 1KHz 1.30 470 1KHz 1.48 560 1KHz 1.90 680 1KHz 2.25 820 1KHz 2.55 1000 1KHz 2.60 Other electrical specifications to order - Consult factory IDC (max) (A) 0.48 0.42 0.33 0.28 0.24 0.23 Tolerance Code (Y) J K M TOLERANCE (Y) Inductance Tolerance ± 5% ± 10% ± 20% Notes Made to order Made to order Standard -00 -36 PACKAGING (ZZ) Loose Piece Taped and Reeled Made to order Standard - 500 per reel Operating Temperature Insulation resistance Dielectric Strength Temperature Characteristics Vibration resistance MATERIAL SPECIFICATIONS -30°C to +100°C Over 100MΩ at 100 VDC between core and coil No dielectric breakdown at 100 VDC for 1 minute between core and coil Inductance coefficient (0-2000) x 106/°C (-25 - 85°C) Inductance deviation within ±5%, (After vibration for 1 hour in each of three orientations with sweep vibration (10-55-10Hz) and 1.5mm P-P amplitude) Copyright Cambion Thursday, 20 February 2003 Page 2 of 2