CAMBION Technical Data Sheet Wearnes Cambion LTD Castleton, Hope Valley, Derbyshire, S33 8WR, England Telephone: +44(0)1433 621555 Fax: +44(0)1433 621290 Web: www.cambion.com Email: [email protected] 555-8062 Surface mount power inductors, 5mm, 4.7µΗ thru 220µH How to order code 555-8062-XXX-Y-ZZ Basic Part No XXX = Inductance identifier, Y = tolerance, ZZ = packaging Basic Part Number (XXX)-4R7 -5R6 -6R8 -8R2 -100 -120 -150 -180 -220 -270 555-8062 -330 -390 -470 -560 -680 -820 -101 -121 -151 -181 -221 ELECTRICAL SPECIFICATIONS Inductance DCR (max) Frequency (MHz) (µΗ) (Ω) 4.7 7.96 0.06 5.6 7.96 0.07 6.8 7.96 0.07 8.2 7.96 0.08 10 2.52 0.10 12 2.52 0.12 15 2.52 0.14 18 2.52 0.15 22 2.52 0.18 27 2.52 0.20 33 2.52 0.23 39 2.52 0.32 47 2.52 0.37 56 2.52 0.42 68 2.52 0.46 82 2.52 0.60 100 1KHz 0.70 120 1KHz 0.93 150 1KHz 1.10 180 1KHz 1.38 220 1KHz 1.57 Other electrical specifications to order - Consult factory Copyright Cambion Friday, 21 February 2003 Page 1 of 2 IDC (max) (A) 2.60 2.40 2.20 2.00 1.44 1.40 1.30 1.23 1.11 0.97 0.88 0.80 0.72 0.68 0.61 0.58 0.52 0.48 0.40 0.38 0.35 CAMBION Technical Data Sheet Wearnes Cambion LTD Castleton, Hope Valley, Derbyshire, S33 8WR, England Telephone: +44(0)1433 621555 Fax: +44(0)1433 621290 Web: www.cambion.com Email: [email protected] Tolerance Code (Y) J K M TOLERANCE (Y) Inductance Tolerance ± 5% ± 10% ± 20% Notes Made to order Made to order Standard -00 -36 PACKAGING (ZZ) Loose Piece Taped and Reeled Made to order Standard - 1500 per reel Operating Temperature Insulation resistance Dielectric Strength Temperature Characteristics Vibration resistance MATERIAL SPECIFICATIONS -30°C to +100°C Over 100MΩ at 100 VDC between core and coil No dielectric breakdown at 100 VDC for 1 minute between core and coil Inductance coefficient (0-2000) x 106/°C (-25 - 85°C) Inductance deviation within ±5%, (After vibration for 1 hour in each of three orientations with sweep vibration (10-55-10Hz) and 1.5mm P-P amplitude) Copyright Cambion Friday, 21 February 2003 Page 2 of 2