CAMBION Wearnes Cambion LTD Castleton, Hope Valley, Derbyshire, S33 8WR, England Telephone: +44(0)1433 621555 Fax: +44(0)1433 621290 Web: www.cambion.com Email: [email protected] Technical Data Sheet 703-3300 IC Socket, stamped contacts How to order code 703-33XX-YY-04-10 Basic Part No XX = No. of Contacts, YY = Pitch Identifier, ZZ = Plating Finish DIMENSIONS Full Part Number 703-3306-01-04-10 703-3308-01-04-10 703-3314-01-04-10 703-3316-01-04-10 703-3318-01-04-10 703-3320-01-04-10 703-3324-01-04-10 703-3324-03-04-10 703-3328-03-04-10 703-3332-03-04-10 703-3340-03-04-10 703-3342-03-04-10 Contacts (XX) 6 8 14 16 18 20 24 24 28 32 40 42 A .300 (7,62) .400 (10,16) .700 (17,78) .800 (20,32) .900 (22,86) 1.000 (25,40) 1.200 (30,48) 1.200 (30,48) 1.400 (35.48) 1.600 (40,64) 2.000 (50,80) 2.100 (53,34) Dimensions B C .200 (5,08) .400 (10,16) .300 (7,62) .400 (10,16) .600 (15,24) .400 (10,16) .700 (17,78) .400 (10,16) .800 (20,32) .400 (10,16) .900 (22,86) .400 (10,16) 1.100 (27,94) .400 (10,16) 1.100 (27,94) .700 (17,78) 1.300 (33,02) .700 (17,78) 1.500 (38,10) .700 (17,78) 1.900 (48,26) .700 (17,78) 2.000 (50,80) .700 (17,78) Copyright Cambion Friday, 28 March 2003 Page 1 of 2 D (YY) .300 (7,62) .300 (7,62) .300 (7,62) .300 (7,62) .300 (7,62) .300 (7,62) .300 (7,62) .600 (15,24) .600 (15,24) .600 (15,24) .600 (15,24) .600 (15,24) CAMBION Technical Data Sheet Wearnes Cambion LTD Castleton, Hope Valley, Derbyshire, S33 8WR, England Telephone: +44(0)1433 621555 Fax: +44(0)1433 621290 Web: www.cambion.com Email: [email protected] Component SPECIFICATIONS Material Contact Moulding Phosphor Bronze Glass filled Polyester UL94V-0 Contact Resistance Insulation Resistance Operating Temperature Finish -04 Electro Tin Black 16 m Ohms max at 1 Amp DC 10 G Ohms min. -55°C to +105°C FEATURES Commercial standard product - for low cost Glass reinforced polyester moulded body to UL94V-0 - for flame retardancy Wide target contact area - for ease of insertion Ladder frame body construction - for improved air flow and low weight Buttable end to end, and side to side on 0.100" (2,54mm) mounting grid - for maximum board density Copyright Cambion Friday, 28 March 2003 Page 2 of 2