MP40,50S SERIES 40,50S IN-LINE BRIDGE RECTIFIER CHENG- YI ELECTRONIC MP40,50S Dim Min Max A 28.40 28.70 B 10.97 11.23 _ 13.90 C _ 19.10 D _ 5.10 E 1.20 Typical G 3.05 3.60 H All Dimensioas in mm FEATURES Diffused Junction Low Forward Voltage Drop High Reliability High Surge Current Capability Ideal for Printed Circuit Boards Designed for Saving Mounting Space UL Recognized File #E157705 MECHANICAL DATA Cass: Epoxy Cass With Heat Sink Internally Mounted in Bridge Encapsulation Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: As Marked on Body Weight: 30 grams (approx.) Mounting: Position: Any Marking: Type Number MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS @ TA=25 C unless otherwise specified 0 Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristics Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Symbol -00S -01S -02S -04S -06S -08S -10S UNIT VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V Average Rectifier Output Current @ TC=55 C 40 50 IO 40 50 A Non-Repetitive Peak Forward Surge Current 8.3ms single half sine-wave Superimposed on rated load (JEDEC Mehtod) 40 50 IFSM 400 400 A VFM 1.2 V IR 10 1.0 A mA 1.5 K/W 0 Forward Voltage Drop (per element) KBPC40 @IF =20A KBPC50 @IF =25A Peark Reverse Current at Rated DC Blocking Voltage (per element) @ TA=250C @ TA=1000C Typical Thermal Resistance (per element) (Note 2) RMS Isolation Voltage from Case to Lead Operating and Storage Temperature Range R JC VISO 2500 TJ, T STG -55 to +150 NOTE: 1. Thermal resistance junction to cass per element mounted on 8" x 8" x 25" thick AL plate. V 0 C MP40,50S SERIES 40,50S IN-LINE BRIDGE RECTIFIER CHENG- YI ELECTRONIC RATING AND CHARACTERISTICS CURVES MP40,50S SERIES Fig. 2 Typical Forward Characteristics (per element) Fig. 1 Forward. Current Derating Curve IF, INSTANTANEOUS FORWARD CURRENT, (A) IF, AVERAGE FORWARD CURRENT, (A) 60 Mounted on a 220 x 220 x 50 mm All plate heatsink KBPC50 45 KBPC40 30 15 Resistive or Inductive load 0 0 25 50 75 100 125 100 10 1.0 0.1 o TJ = 25 C Pulse Width = 300 s 0.01 150 0 0 TC, CASE TEMPERATURE, (C) 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 3 Max Non-Repetitive Surge Current Fig. 4 Typical Junction Characteristics (per element) 400 1000 Single Half Sine-Wave (JEDEC Method) f = 1 MHz o TJ = 25 C C J, CAPACITANCE, (pF) 300 200 100 100 TJ = 150oC 0 1 10 100 10 0.1 NUMBER OF CYCLES AT 60 Hz 1.0 10 VR, REVERSE VOLTAGE (V) Fig. 5 Typical Reverse Characteristics (per element) 100 IR, INSTANTANEOUS REVERSE CURRENT, (A) I FSM, PEAK FW D. SURGE CURRENT, (A) 0.2 TJ = 125oC 10 1.0 0.1 o TJ = 25 C 0.01 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) 100