MP6 SERIES CHENG- YI SINGLE-PHASE SILICON BRIDGE ELECTRONIC REVERSE VOLTAGE -50 to 1000 Volts FORWARD CURRENT -6.0 Amperes FEATURES Surge overload rating - 125 amperes peak Low forward voltage drop Small size: simple installation Silver Plated Copper Leads Mounting Position: Any Case: Molded plastic with Heatsink interally mounted in the bridge encapsulation MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 250C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. MP6005 MP601 MP602 MP604 MP606 MP608 MP610 UNITS Maximum Recurrent Peak Reverse Voltage 50 100 200 400 600 800 1000 V Maximum RMS Bridge Input Voltage 35 70 140 280 420 560 700 V TC=1000C(Note1) TA=500C(Note2) Maximum Average Forward Rectified Outptu Current at 6.0 3.0 A Peak Forward Surge Current 8.3 ms single half sine-wave super imposed on rated load 125 A Maximum Forward Voltage Drop per Bridge Element at 3.0A Peak 1.0 V Maximum Reverse Current at Rated DC Blocking Voltage per Element Operating Temperature Range TC Storage Temperature Range TA TA=25 C TA=1000C NOTES: 1. Unit mounted on metal chassis 2. Unit mounted on P.C. Board 0 10.0 A 1.0 mA -55 to +125 0 -55 to +150 0 C C MP6 SERIES CHENG- YI SINGLE-PHASE SILICON BRIDGE ELECTRONIC RATING AND CHARACTERISTICS CURVES MP6 SERIES FIG. 2 - TYPICAL REVERSE CHARACTERISTICS 10 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES AVERAGE FORWARD OUTPUT CURRENT AMPERES FIG. 1 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT 8 HEAT-SINK MOUNTING TC 6 PC MOUNTING TA 4 2 10 1.0 TJ=25oC 0.1 0.01 0 50 100 0 150 TEMPERATURE, 0 C 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE FIG.4 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 INSTANTANEOUS FORWARD CURRENT, AMPERES FIG. 3 - MAXIMUM FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT AMPERES 125 100 75 50 TJ=25oC 25 10 TJ=25oC 1.0 0.1 0.01 0 1 10 NUMBER OF CYCLES AT 60Hz 100 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 INSTANTANEOUS FORWARD VOLTAGE, VOLTS