CHENMKO ENTERPRISE CO.,LTD SS05100PT SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER VOLTAGE RANGE 100 Volts CURRENT 0.5 Ampere FEATURES * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * For surface mounted applications * Low profile package * Built-in strain relief * Metal silicon junction, majority carrier conduction * Low power loss, high efficiency * High current capability, low forward voltage drop * For use in low voltage high frequency inverters, free wheeling, and polarity protection applications * High temperature soldering guaranteed : 260oC/10 seconds at terminals SOD-123 0.152(3.85) 0.140(3.55) 0.112(2.85) 0.100(2.55) 1 Case: JEDEC SOD-123 molded plastic Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Marking: K9 2 MAX. 0.006(0.15) 0.004(0.10) 0.000(0.00) 0.01(0.25) MIX.. 0.071(1.80) 0.055(1.40) 0.037(0.95) MECHANICAL DATA 0.053(1.35) 0.028(0.70) 0.020(0.50) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60 HZ, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) SOD-123 MAXIMUM RATINGES ( At TA = 25oC unless otherwise noted ) SYMBOL SS05100 PT UNITS Maximum Recurrent Peak Reverse Voltage RATINGS VRRM 100 Volts Maximum RMS Voltage VRMS 70 Volts VDC 100 Volts Maximum DC Blocking Voltage o IO 0.5 Amps Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) IFSM 8.0 Amps Typical Thermal Resistance (Note 1) R Maximum Average Forward Rectified Current at TL = 118 C Operating Temperature Range Storage Temperature Range JL 70 o C/W TJ -40 to +150 o TSTG -40 to +150 o C C o ELECTRICAL CHARACTERISTICS ( At TA = 25 C unless otherwise noted ) CHARACTERISTICS SYMBOL SS05100PT UNITS Maximum Instantaneous Forward Voltage at IF=0.5A @ TA = 25oC VF 0.57 Volts Maximum Average Reverse Current at Ratied DC Blocking Voltage @ TA = 25oC IR 50 uAmps NOTES : 1. Thermal Resistance ( Junction to Lead ) : PC Board Mounted on 0.06 X 0.06" ( 0.15X 0.15mm ) copper pad area. 2003-12 AVERAGE FORWARD CURRENT, (A) FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE .5 .4 .3 .2 .1 0 0 20 40 60 80 100 120 150 LEAD TEMPERATURE, ( oC ) INSTANTANEOUS FORWARD CURRENT, ( A ) RATING CHARACTERISTIC CURVES ( SS05100PT ) FIG. 2 - MAX. INSTANTANEOUS FORWARD CHARCTERISTICS 2 1 .5 .2 .1 .05 0 FIG. 3 - TYPICAL REVERSE CHARACTERISTICS 9 1.2 FIG. 4 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT o Tj=150 C PEAK FORWARD SURGE CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (mA) 5 0.2 0.4 0.6 0.8 1.0 INSTANTANEOUS FORWARD VOLTAGE, (V) 2 1 .5 0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE, ( % ) 8 6 4 2 0 0.02 0.05 0.1 0.2 0.5 NUMBER OF CYCLES AT 60HZ 1.0 2.0