CE 1N4001 THRU 1N4007 CHENYI ELECTRONICS GENERAL PURPOSE PLASTIC RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0Ampere FEATURES . The plastic package carries Underwrites Laboratory Flammability Classification 94V-0 . Construction utilizes void-free molded plastic technique . Low reverse leakage . High forward surge current capability . High temperature soldering guaranteed: 250 /10 seconds, 0.375"(9.5mm)lead length,5lbs.(2.3kg). MECHANICAL DATA . Case: JEDEC DO-41 molded plastic body . Terminals: lead solderable per MIL-STD-750,method 2026 . Polarity: color band denotes cathode end . Mounting Position: Any . Weight: 0.012 ounce, 0.33 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Ratings at 25 ambient temperature unless otherwise specified,Single phase,half wave 60Hz,resistive or inductive) load. For capacitive load,derate by 20%) Symbols 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 Units Maximum reurrent peak reverse voltage VRRM 50 Maximum RMS voltage VRMS Maximum DC blocking voltage VDC Maximum average forward rectified 100 200 400 600 800 1000 Volts 35 70 140 280 420 50 100 200 400 600 560 700 Volts 800 1000 Volts I(AV) 1.0 Amp IFSM 30.0 Amps VF 1.1 Volts current 0.375"(9.5mm)lead length at TA=75 Peak forward surge current 8.3ms half sing-wave superimposed on rated load (JEDEC method)TA=75 Maximum instantaneous forward voltage at 1.0 A Maximum reverse TA=25 current at rated DC blocking voltage TA=100 5.0 IR R R Typeical thermal resistance(Note 2) Typical junction Capacitance(Note 1) Maximum DC Blocking Voltage temperature Operating and storage temperature range A 50.0 JA 50.0 JL 25.0 /W CJ 15.0 TA +150 TJ pF -50 to +175 TSTG Notes: 1. Measured at 1MHz and applied reverse voltage of 4.0V DC 2.Thermal resistance from juntion to ambient and from junction lead at 0.375"(9.5mm)lead length, P.C.B. Mounted Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD Page 1 of 2 CE 1N4001 THRU 1N4007 CHENYI ELECTRONICS GENERAL PURPOSE PLASTIC RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0Amperes RATINGS AND CHARACTERISTIC CURVES 1N4001 THRU 1N4007 FIG.2-TYPICAL INSTANTANEOUS FORWARD FLG.1-FORWARD CURRENT DERATING CURVE CHARACTERISTICS FIG.3-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG.4-TYPICAL REVERSE CHARACTERISTICS FIG.5-TYPICAL JUNCTION CAPACITANCE Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD Page 2 of 2