CE S2A THRU S2M CHENYI ELECTRONICS SURFACE MOUNT GALSS PASSIVATED JUNCTION RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 1.5Amperes FEATURES . For surface mounted applications . Glass passivated junction . Low profile package . Built-in strain relief , ideal for automated placement . Plastic package has Underwrites Laboratory Flammability Classification 94V-0 . High temperature soldering guaranteed: 250 /10 seconds, at terminals MECHANICAL DATA . Case: JEDEC SMA(DO-214AA) molded plastic . Terminals: Plated axial leads solderable per MIL-STD-750,method 2026 . Polarity: Color band denotes cathode end Dimensions in inches and (millimeters) . Mounting Position: Any . Weight: 0.003 ounce, 0.093 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Ratings at 25 ambient temperature unless otherwise specified,Single phase,half wave 60Hz,resistive or inductive) load. For capacitive load,derate current by 20%) Symbols S2A S2B S2D S2G S2J S2K S2M Units Maximum Recurrent peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 100 Volts Maximum DC blocking voltage Maximum average forward rectified I(AV) 1.5 Amp IFSM 50.0 Amps VF 1.15 Volts current at TL=100 Peak forward surge current (8.3ms half sing wave superimposed on rated load (JEDEC method)TL=100 Maximum instantaneous forward voltage at 1.0 A Maximum reverse recovery time(Note 1) TA=25 current at rated DC Blocking Voltage TA=125 A 125 R JL 16.0 R JA 53.0 Typical Thermal Resistance( Note 2) Typical reverse recovery time(Note 3) 1.0 IR Trr /W 2.0 S 30.0 Typical junction capacitance(Note 1) Operating and storage temperature range TJ TSTG pF -55 to +150 Notes: 1.Measured at 1MHz and applied reverse voltage of 4.0V DC. 2.Thermal resistance from junction to ambient and from junction to lead mounted on 0.2 X 0.2"(5.0 X 5.0mm) copper pad areas. 3.Reverse recovery test conditions:IF=0.5A,IR=1.0A,Irr=0.25A. Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD Page 1 of 2 CE S2A THRU S2M CHENYI ELECTRONICS SURFACE MOUNT GALSS PASSIVATED JUNCTION RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 1.5Amperes RATINGS AND CHARACTERISTIC CURVES S2A THRU S2M FLG.1-FORWARD CURRENT FIG.2-TYPICAL INSTANTANEOUS FORWARD DERATING CURVE CHARACTERISTICS FIG.3-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT FIG.4-TYPICAL REVERSE CHARACTERISTICS FIG.5-TYPICAL JUNCTION CAPACITANCE Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD Page 2 of 2