KAD07 SERIES OPEN FRAME AC - DC POWER MODULE 6.3 ~ 7.6W UL / cUL / TUV / CE FEATURES AC/DC POWER MODULE UNIVERSAL INPUT 85 ~ 265 VAC HIGH EFFICIENCY UP TO 79% SHORT CIRCUIT PROTECTION INTERNAL INPUT FILTER 2 YEARS WARRANTY OPEN FRAME MODEL LIST MODEL NO. INPUT VOLTAGE OUTPUT OUTPUT WATTAGE VOLTAGE Single Output Models OUTPUT CURRENT EFF. (typ.) EFF. (min.) KAD0703 85~265 VAC 6.6 WATTS +3.3 VDC 2000 mA 72% 69% KAD0705 85~265 VAC 7.5 WATTS + 5 VDC 1500 mA 75% 72% KAD0712 85~265 VAC 7.5 WATTS + 12 VDC 630 mA 78% 75% KAD0715 85~265 VAC 7.5 WATTS + 15 VDC 500 mA 78% 75% KAD0724 85~265 VAC 7.6 WATTS + 24 VDC 320 mA 79% 77% Dual Output Models KAD0712D 85~265 VAC 7.6 WATTS 12 VDC 320 mA 77% 74% KAD0715D 85~265 VAC 7.5 WATTS 6.3 WATTS 250 mA +1A / +0.6A 75% 85~265 VAC 15 VDC + 3.3 /+ 5 VDC 78% KAD07503D 68% 65% KAD07512D 85~265 VAC 6.6 WATTS + 5 /+ 12 VD C +0.6A / +0.3A 75% 72% www.chinfa.com [email protected] KAD07 SERIES OPEN FRAME AC - DC POWER MODULE CIRCUIT SCHEMATIC Block diagram for KAD07 series with single output L Fuse Vo + Rectifier Inrush Current Limiter and Rectifier Line Filter Switching Device Vo - N Y Control Circuit Opto Isolation Reference & Error Amp. FG Block diagram for KAD07 series with dual output L Fuse Vo + Rectifier Inrush Current Switching Limiter and Device Rectifier Line Filter com Rectifier N Vo - Y Control Circuit Opto Isolation Reference & Error Amp. FG Block diagram for KAD07503D & KAD07512D L Fuse Line Filter Inrush Current Limiter and Rectifier Switching Device Rectifier Vo 2 Rectifier Vo1 com N Y Control Opto Isolation Reference & Error Amp. FG www.chinfa.com [email protected] KAD07 SERIES OPEN FRAME AC - DC POWER MODULE SPECIFICATION All Specifications Typical At Nominal Line, Full Load, 25oC Unless Otherwise Noticed GENERAL Characteristics Conditions min. Switching frequency Vi nom, Io nom Isolation voltage Input / Output Isolation resistance Input / Output, @ 500VDC Ambient temperature Operating at Vi nom, Io nom typ. max. KHz 3,000 VAC 100 M Derating Storage temperature Relative humidity Vi nom, Io nom Dimension L58 x W45 x H18.5 Cooling Free air convection Base material Plastic Non operational o + 71 -20 o Vi nom, Io nom +51 to +71 C unit 80 %/ C 2 o +100 -40 C o 95 C % RH mm INPUT SPECIFICATIONS Characteristics Conditions Rated input voltage Io nom Input voltage range Io nom min. typ. max. unit 240 VAC 85 Line frequency Vi nom, Io nom Inrush current Io nom AC in 85 265 VAC DC in 120 370 VDC 63 Hz Vi : 115VAC 10 A Vi : 230VAC 18 A 47 OUTPUT SPECIFICATIONS Characteristics Conditions min. typ. max. Output voltage accuracy Minimum load 2 Vi nom single output models dual output models (each output) Line regulation Io nom, Vi min ...Vi max Load regulation Vi nom, Io min ...Io nom unit % 0 % 20 % single output models dual output models Transient recovery time Vi nom, Io nom = 1 Temperature coefficient Vi nom, Io nom 0.5 Io nom Ripple & noise Vi nom, Io nom,BW = 20MHz Vout x Efficiency Vi nom, Io nom, Po / Pi Up to 79%, See model list 1 2 % 5 % 0.02 % / oC S 300 1% p-p max. % mV CONTROL AND PROTECTION Input fuse T2A / 250VAC internal Output short circuit By current limited APPROVALS AND STANDARDS UL / cUL UL1950 TUV EN60950 CE EN55022 class B for EMI EN50082-1 for EMS www.chinfa.com [email protected] KAD07 SERIES MECHANISM & PIN CONFIGURATION OPEN FRAME AC - DC POWER MODULE mm [inch] 58[2.28] 17.5 [0.69] 17.5 [0.69] 5 [0.20] 5 [0.20] 4 [0.16] 18.5 [0.73] BURL AT 4 CORNER 4.5 [0.18] 3 1 2 DIA 1.00 [0.04] 47 [1.85] 28.9 [1.14] TP 3 x 6 23 [0.91] 4 5 6 7 [0.28] 12.5 [0.49] 12.5 [0.49] 10 [0.39] 10 [0.39] BOTTOM VIEW PHYSICAL CHARACTERISTICS SIZE 58 x 45 x 18.5 mm 2.28 x 1.77 x 0.73 inches BASE MATERIAL Plastic WEIGHT 42 g PIN ASSIGNMENT GENERAL PIN NO. 1 2 3 4 5 6 SINGLE LINE NEUTRAL F. G. Vo - NO PIN Vo + com Vo + DUAL LINE NEUTRAL F. G. Vo - LINE NEUTRAL F. G. + 5V com +3.3V LINE NEUTRAL F. G. +12V com +5V DERATING Power out [ % ] 100 60 0 -20 51 o 71 Temperature [ C ] www.chinfa.com [email protected]