SPECIFICATIONS 1/9 1. Scope of Application These specifications are applied to the chip type LED lamp , model CL-L233-MC13N1-C 2. Part code CL-L233-MC13N1-C Series L233 : White power LED for general lighting. Special specifications M : General Color Rendering Index Typ. 85 Type. Watt Class C13 : 13 watt package. Lighting color N1 : Energy Star Correlated Color Temperature 5000(K) Revision Symbol No sign: First Editon , A～Z: Revision Approved Checked K.Funakubo 2010/3/5 2010/3/5 Mark Date Issue of first edition Description Appro. S.Imai 2010/3/5 Drawn H.Matsuura 2010/3/5 Symbol CITILED Name CL-L233-MC13N1-C Drawing No AD3E-104-01 CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P630 03/10 SPECIFICATIONS 2/9 3. Outline drawing Cathode ×12 Anode ×12 ×12 Tc Measurement Point Protection device It has a protection device built in as a protection circuit against static electricity. 4. Performance ( 1 ) Absolute Maximum Rating Parameter Symbol Rating Value Unit Power Dissipation PD 17.7 W Forward Current IF 840 mA Forward Pulse Current IFP 1,200 mA Reverse Current IR 1 mA Operating Temperature TOP -30 ~ +85 C Storage Temperature TST -40 ~ +100 C *1 120 Tj Max C Junction Temperature *2 *1 Forward Current : Duty<=1/10 , Pulse Width<=10msec *2 D.C. Current : Tj = Tc + Rj-c × PD Pulse Current : Tj = Tc + Rj-c × Pw(Power Dissipation / one-Pulse) × duty Approved Checked K.Funakubo 2010/3/5 2010/3/5 Mark Date Issue of first edition Description Appro. S.Imai 2010/3/5 Drawn H.Matsuura 2010/3/5 Symbol CITILED Name CL-L233-MC13N1-C Drawing No AD3E-204-01 CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P630 03/10 SPECIFICATIONS 3/9 ( 2 ) Electro-optical Characteristics Parameter ( Tc=25 C ) Symbol Condition Min. Typ. Max. Unit Forward Voltage VF IF=720mA 17.50 18.60 21.0 V Luminous Flux Φv IF=720mA 945 1110 - lm General Color Rendering Index Ra IF=720mA 80 85 - - Thermal Resistance Rj-c Junction-case - 2.4 - C/W Chromaticity coordinates ( Condition : IF=720mA ,Tc=25 C ) Color rank Center a N1 b c d x 0.3447 0.3551 0.3376 0.3366 0.3515 y 0.3553 0.3760 0.3616 0.3369 0.3487 0.38 0.37 y 0.36 0.35 0.34 0.33 0.33 0.34 x 0.35 0.36 Note: The tolerance of measurement at our tester is VF±3% , Φv±10% , Chromaticity(x,y)±0.005. Approved Checked K.Funakubo 2010/3/5 2010/3/5 Mark Date Issue of first edition Description Appro. S.Imai 2010/3/5 Drawn H.Matsuura 2010/3/5 Symbol CITILED Name CL-L233-MC13N1-C Drawing No AD3E-304-01 CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P630 03/10 SPECIFICATIONS 4/9 5. Characteristics Forward Current vs. Forward Voltage Forward Current vs. Relative Luminous Flux Tc=25C 18.5 VF [V] 18.0 17.5 17.0 16.5 16.0 0 200 400 600 800 Tc=25C 140% Relative Luminous Flux [a.u.] 19.0 120% 100% 80% 60% 40% 20% 0% 0 1000 200 Forward Current vs. Chromaticity Coordinate 800 1000 Case Temperature vs. Chromaticity Coordinate Tc=25C 0.020 Δx 0.015 Δy 0.010 IF=720mA 0.020 Δx 0.015 Δy 0.010 0.005 0.005 Δx, Δy Δx, Δy 600 IF [mA] IF [mA] 0.000 -0.005 0.000 -0.005 -0.010 -0.010 -0.015 -0.015 -0.020 -0.020 0 200 400 600 IF [mA] 800 1000 0 Approved Checked K.Funakubo 2010/3/5 2010/3/5 Mark Date 400 Issue of first edition Description Appro. S.Imai 2010/3/5 20 Drawn H.Matsuura 2010/3/5 40 60 Tc [C] 80 100 Symbol CITILED Name CL-L233-MC13N1-C Drawing No AD3E-404-01 CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P630 03/10 SPECIFICATIONS Case Temperature vs. Forward Voltage Case Temperature vs. Relative Luminous Flux IF=720mA 19.0 18.5 18.0 17.5 17.0 IF=720mA 120% Relative Luminous Flux [a.u.] 19.5 ＶＦ[V] 5/9 100% 80% 60% 40% 20% 16.5 0% 0 20 40 60 80 100 0 20 Tc [C] 800 700 IF[mA] 600 500 400 300 200 100 0 50.0 75.0 100 IF=720mA 1.2 1.0 0.8 0.6 0.4 0.2 0.0 350 100.0 125.0 450 Tc [C] K.Funakubo 2010/3/5 Issue of first edition Description Appro. 550 650 750 λ [nm] Approved Checked 2010/3/5 Mark Date 80 Spectrum Relative Emission Intensity [a.u.] 900 25.0 60 Tc [C] Case Temperature vs. Allowable Forward Current 0.0 40 S.Imai 2010/3/5 Drawn H.Matsuura 2010/3/5 Symbol CITILED Name CL-L233-MC13N1-C Drawing No AD3E-504-01 CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P630 03/10 SPECIFICATIONS 6/9 6. Reliability (1) Details of the tests Test Item Test Condition Ta=-25 C, IF=480 mA× 1000 hours(with Al-fin) Continuous Operation Test Ta=50 C,IF=480 mA× 1000 hours(with Al-fin) Low Temperature Storage Test -40 C × 1000 hours High Temperature Storage Test 100 C × 1000 hours Moisture-proof Test Thermal Shock Test 60 C, 90 %RH for 1000 hours -40 C × 30 minutes – 100 C × 30 minutes, 100 cycle (2) Judgment Criteria of Failure for Reliability Test Measuring Item Symbol Measuring Condition Forward Voltage VF Total Luminous Flux Φv (Ta=25 C) Judgment Criteria for Failure IF=720mA IF=720mA > U × 1.1 < S × 0.85 U defines the upper limit of the specified characteristics. S defines the initial value. Note: Measurement shall be taken between 2 hours and 24 hours, and the test pieces should be returned to the normal ambient conditions after the completion of each test. Similar product's reliability test results will be used for CL-L233-MC13N1-C. Approved Checked K.Funakubo 2010/3/5 2010/3/5 Mark Date Issue of first edition Description Appro. S.Imai 2010/3/5 Drawn H.Matsuura 2010/3/5 Symbol CITILED Name CL-L233-MC13N1-C Drawing No AD3E-604-01 CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P630 03/10 SPECIFICATIONS 7/9 7. Packing Specifications (1) Packing An empty tray is placed on top of a five-tier tray which contain 40 pieces each. The set of five trays is banded together with two rubber bands. (Smallest packing unit: 200 pieces) A label with product name, quantity, lot number is placed on the upper empty tray. Tray (Dimensions: 310 × 200 × 14.6mm / Materials: Electrically conductive PS) < Packing figure > 210 310 Product 50pcs/tray < Example of indication label > CUSTOMER TYPE CL-L233-MC13N1-C---(1) ---(2) xxx P.NO ---(3) LOT No 03D001 ---(4) Q'ty 200 pcs. PASS CITIZEN ELECTRONICS 1. TYPE e.g. CL-L233-MC13N1-C 2. P.No. (Cutomer's P/N) e.g. xxx 3. Lot No. e.g. 03D001 - First letter: Last digit of the year e.g. 0 : year 2010 - Second letter: Production month e.g. 3 : Mar Note: October, November and December are designated by X, Y and Z, respectively. - Third letter: CE's control number e.g. D001 4. Quantity e.g. 200 pieces Approved Checked K.Funakubo 2010/3/5 2010/3/5 Mark Date Issue of first edition Description Appro. S.Imai 2010/3/5 Drawn H.Matsuura 2010/3/5 Symbol CITILED Name CL-L233-MC13N1-C Drawing No AD3E-704-01 CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P630 03/10 SPECIFICATIONS 8/9 Precautions 1. Avoid the application of any stress to the lens portion. 2. Avoid any contact by a sharp metal nail or other materials with the lens portion. Resin portion (Shaded area) 3. This product should be secured firmly by fastening an M3 screw on both sides of the product. Please be careful not to apply any stress to the product during the clamping operation. As the connection status could vary depending on materials of outer heat sink, please check thoroughly. M3screw (Insulation) 11.0mm Recommended torque : 0.6~0.8N-m Spring washer (≦ ƒΣ6mm) Plane washer ( ≦ƒΣ6mm) Thermal conductive silicon grease (Insulation paste) 19.5mm Outer heat sink Recommended installation screw pitch 4. Thermal conductive silicone grease should be applied to the whole rear surface so that this product can dissipate heat as a whole. However, the use of insulating paste is strongly recommended in order to avoid short circuit. This product could be bent during the clamping operation if heat grease in sheet form is used. For this reason, it is recommended that grease in paste form is used. In addition, sufficient insulation should be established between heat sink area of LED package and surface of fixture. (*surface of fixture: exterior of instrument used for dielectric strength test in Electrical Appliance and Material Safety Law.) 5. Handling of static electricity - These products are sensitive to static electricity charge. Please take measures to prevent any static electricity being produced such as the wearing of a wristband or anti-static gloves when handling this product. - All devices, equipment and machinery must be properly grounded. It is recommended that precautions be taken against surge voltage to the equipment that mounts the LEDs. - ESD sensitivity of this product is 1000V (HBM, based on JEITA ED-4701/304). - When inspecting the final products in which LEDs were assembled, it is recommended to check whether the assembled LEDs are damaged by static electricity or not. - It is easy to find static-damaged LEDs by a light-on test. <Light-on test criterion> Judgmental criterion Condition IF=Max.1mA/die No-lighting in entire block making up parallel circuit is unacceptable L233 consists of three blocks. Approved Checked K.Funakubo 2010/3/5 2010/3/5 Mark Date Issue of first edition Description Appro. S.Imai 2010/3/5 Drawn H.Matsuura 2010/3/5 Symbol CITILED Name CL-L233-MC13N1-C Drawing No AD3E-804-01 CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P630 03/10 SPECIFICATIONS 9/9 Precautions (continued) 6. Please be aware that this product should not come into contact with any other parts in assembled status. 7.Drive circuit - A constant current circuit is recommended as a drive circuit. And when two or more LED packages are connected, the series connection between each package is recommended. - Please design a circuit that prevents any reverse voltage (excess current) from being applied to this product instantaneously when the circuit is ON or OFF. 8. Heat generation - As this product is designed with consideration of the heat release property of module, a heat release design is required to use this product efficiently. Please ensure that heat generation is not in excess of the absolute maximum rating. (Refer to 4-1 Performance) - Factors responsible for an increase in temperature include heat generation attributed to ambient temperature conditions or power dissipation. Thus, drive conditions should be taken into consideration, depending on ambient temperature (Ta). 9. Recommended soldering - Soldering operation should be performed within 3.5 seconds per land using a soldering iron of 40W or lower. The temperature of a soldering iron should be adjusted 350C or lower. - No external force is applied to sealing resin during soldering operation. - Please do not handle a product until it returns to a normal temperature. Note: This product is not adaptable to reflow process. 10. Other - This product complies with RoHS directives. - This product is intended for the application in general electronic devices (such as office automation equipment, communication devices, audio-video equipment, home electrical appliances, measurement hardware and others). In cases where this product is used for the applications that requires high reliability or could directly affect human life or health due to failure or malfunction (aerospace hardware, medical equipment, atomic control equipment and others), please consult with our sales representatives beforehand. - Our warranty does not cover situations where this product undergoes secondary fabrication such as changes in shape. - An agreement of formal product specifications is required prior to mass production. - The specifications and appearance of this product are subject to change without advanced notice. Approved Checked K.Funakubo 2010/3/5 2010/3/5 Mark Date Issue of first edition Description Appro. S.Imai 2010/3/5 Drawn H.Matsuura 2010/3/5 Symbol CITILED Name CL-L233-MC13N1-C Drawing No AD3E-904-01 CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P630 03/10