CONNOR-WINFIELD HTV2A

THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 851-5040.
PHONE (630) 851-4722.
www.conwin.com
PRODUCT
D AT A
SHEET
CRYSTAL CONTROLLED OSCILLATORS
5.0V HCMOS VCTCXO 14 Pin DIP Crystal Oscillator
ABSOLU TE MAX IMUM RATING S
PARAMETER
Storage Temperature
UNITS MINIMUM
-40
NOMINAL
-
MAXIMUM
85
UNITS
°C
Supply Voltage
(Vcc)
-0.5
-
7
Vdc
Control Voltage
(Vc)
-0.5
-
7
Vdc
Frequency Range
(Fo)
.110
-
12.7999
MHz
HTV1A - Frequency Range
(Fo)
MODEL SPECIFICATIONS
MODEL HTV1 / HTV1A
HTV1 -
NOTE
HTVx-Series
HTVxA-Series
TABLE 2.0
12.8
-
60
MHz
Frequency Stability vs. Change in Temperature
-0.5
-
0.5
ppm
Operating Temperature Range
20
-
40
°C
Total Frequency Tolerance
-8.0
-
8.0
ppm
DESCRIPTION
1
MODEL HTV2 / HTV2A
HTV2 -
Frequency Range
(Fo)
.110
-
12.7999
MHz
HTV2A - Frequency Range
(Fo)
12.8
-
60
MHz
-1.0
-
1.0
ppm
0
-
50
°C
-8.5
-
8.5
ppm
Frequency Stability vs. Change in Temperature
Operating Temperature Range
Total Frequency Tolerance
1
MODEL HTV3 / HTV3A
HTV3 -
Frequency Range
(Fo)
.110
-
12.7999
MHz
HTV3A - Frequency Range
(Fo)
12.8
-
60
MHz
-2.5
-
2.5
ppm
0
-
70
°C
-10.0
-
10.0
ppm
Frequency Stability vs. Change in Temperature
Operating Temperature Range
Total Frequency Tolerance
1
MODEL HTV4 / HTV4A
HTV4 -
CW 0501
HTV2A
27.0M
TABLE 1.0
Frequency Range
(Fo)
.110
-
12.7999
MHz
HTV4A - Frequency Range
(Fo)
12.8
-
60
MHz
Frequency Stability vs. Change in Temperature
-5.0
-
5.0
ppm
Operating Temperature Range
-30
-
70
°C
-12.5
-
12.5
ppm
Total Frequency Tolerance
OPERATING SPECIFIC ATIONS
FEATURES
1
TABLE 3.0
PARAMETER
Frequency Calibration @ 25°C
MINIMUM
-2.5
NOMINAL
-
MAXIMUM
2.5
UNITS
ppm
Frequency Aging First Year
-2.0
-
2.0
ppm
Frequency Aging Ten Years (Including first year)
-5.0
-
5.0
ppm
Vdc
Description:
The Connor Winfield HTVSeries and the HTVxA-Series
are 5.0V HCMOS,
hermetically sealed, Voltage
Controlled Temperature
Compensated Crystal
Oscillator (VCTCXO). The
HTV-Series and the HTVxASeries are designed for
application requiring very tight
frequency stability and low
jitter.
NOTE
2
5.0V OPERATION
LOW JITTER <1ps RMS
FREQUENCY STABILITY:HTV1
HTV1 / HTV1A: ±0.5ppm: 20 to 40°C
HTV2 / HTV2A: ±1.0ppm: 0 to 50°C
HTV3 / HTV3A: ±2.5ppm: 0 to 70°C
HTV4 / HTV4A: ±5.0ppm: -30 to 70°C
Supply Voltage
(Vcc)
4.75
5.0
5.25
Supply Current
(Icc)
-
15
35
mA
Jitter (BW=10Hz to 20MHz)
-
-
5
ps rms
Jitter (BW=12kHz to 20MHz)
Typical Phase Noise
SSB Phase Noise at 10Hz offset
SSB Phase Noise at 100Hz offset
SSB Phase Noise at 1KHz offset
SSB Phase Noise at 10KHz offset
SSB Phase Noise at 100KHz offset
-
-
1
ps rms
FREQUENCY ADJUST
-
-70
-100
-125
-135
-145
-
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
HERMETICALLY SEALED DIP PACKAGE
INPUT CHARACTERISTICS
PARAMETER
Control Voltage
Frequency Adjust Range (0.5 to 4.5V)
Frequency Adjust Linearity
Input Impedance
MINIMUM
NOMINAL
MAXIMUM
UNITS
0.5
±8
-15
10k
2.5
-
4.5
±35
15
-
Vdc
ppm
%
Ohm
(Vc)
ORDERING INFORMATION
TABLE 4.0
NOTE
3
HTV2A
TCXO
SERIES
- 27.0MHz
CENTER
FREQUENCY
Specifications subject to change without notice.
DATA SHEET #:
Tx127
PAGE 1
OF
2
REV: 00
DATE:
03/11/05
aCopyright 2001 Connor-Winfield all rights reserved.
THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 851-5040.
PHONE (630) 851-4722.
www.conwin.com
PRODUCT
D AT A
SHEET
CRYSTAL CONTROLLED OSCILLATORS
HCMOS OUTPUT CHARACTERISTICS
PARAMETER
LOAD
Voltage
HTVx - Series
Current
HTVxA-Series - Current
TABLE 5.0
(High)
(Low)
(Voh)
(Vol)
MINIMUM
4.2
-
(High)
(Low)
(Ioh)
(Ioh)
-4
-
(High)
(Low)
(Ioh)
(Ioh)
-8
45
Duty Cycle at 50% of Vcc
Rise / Fall Time 10% to 90%
NOMINAL
4.5
-
MAXIMUM
15
0.4
UNITS
pF
Vdc
Vdc
-
4
mA
mA
8
55
5
mA
mA
%
nS
50
3
PACKAGE CHARACTERISTICS
NOTE
TABLE 6.0
Package
Hermetically sealed, metal package.
Note:
1) Inclusive of calibration, frequency vs. temperature stability, supply voltage change, load change,
shock and vibration, 10 years aging.
2) Frequency calibration at 25°C, Vc = 2.5V, nominal Vcc, after one minute warm up tim e.
3) Positive Slope.
Pin
1
7
8
14
TABLE 7.0
Connection
Control Voltage
Ground
Output
Vcc
Dimensional Tolerance:
±.005 (.127mm)
±.02 (.508mm)
CONTROL
VOLTAGE
Specifications subject to change without notice.
DATA SHEET #:
Tx127
PAGE 2
OF
2
REV: 00
DATE:
03/11/05
aCopyright 2001 Connor-Winfield all rights reserved.