UF3001 thru UF3007 Compact Technology REVERSE VOLTAGE - 50 to 1000 Volts FORWARD CURRENT - 3.0 Amperes ULTRA FAST RECTIFIERS DO-201AD FEATURES Low cost Diffused junction Ultra fast switching for high efficiency Low reverse leakage current Low forward voltage drop High current capability The plastic material carries UL recognition 94V-0 A A B C D DO-201AD Min. Max. 25.4 7.20 9.50 B 1.20 1.30 C 4.80 5.30 D All Dimensions in millimeter MECHANICAL DATA Dim. A Case : JEDEC DO-201AD molded plastic Polarity : Color band denotes cathode Weight : 0.04 ounces, 1.2 grams Mounting position : Any MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25ΜΊ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% SYMBOL UF3001 UF3002 UF3003 UF3004 UF3005 UF3006 UF3007 UNIT CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current @TA=55 C Peak Forward Surge Current 8.3ms single half sine-wave super imposed on rated load (JEDEC Method) VRRM VRMS VDC Operating Temperature Range Storage Temperature Range 600 420 600 800 560 800 1000 700 1000 V V V IFSM 150 A IR Typical Thermal Resistance (Note 3) 400 280 400 A VF Typical Junction Capacitance (Note 2) 200 140 200 3.0 Maximum forward Voltage at 3.0A DC Maximum Reverse Recovery Time (Note 1) 100 70 100 I(AV) Maximum DC Reverse Current at Rated DC Blocking Voltage @TJ =25 C @TJ =100 C 50 35 50 1.3 1.0 1.7 5 100 V uA TRR 50 75 ns CJ 75 50 pF R0JC 17 C/W TJ -55 to +150 C TSTG -55 to +150 C NOTES : 1.Measured with IF=0.5A,IR=1A,IRR=0.25A. 2.Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 3.Thermal Resistance Junction to Case at 9.5mm Lead Length.PCB Mounted JEDEC Registered Value. CTC0110 Ver. 2.0 1 of 2 UF3001 thru UF3007 UF3001 thru UF3007 RATING AND CHARACTERISTIC CURVES PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT AMPERES FIG.1 - FORWARD CURRENT DERATING CURVE 3.0 2.0 1.0 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0 25 75 50 100 125 150 FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT 200 150 100 50 Single Half-Sine-Wave (JEDEC METHOD) 0 175 1 2 AMBIENT TEMPERATURE , C 10 20 50 100 NUMBER OF CYCLES AT 60Hz FIG.4 - TYPICAL FORWARD CHARACTERISTICS FIG.3 - TYPICAL JUNCTION CAPACITANCE 1000 INSTANTANEOUS FORWARD CURRENT ,(A) 100 UF3001 to UF3004 CAPACITANCE , (pF) 5 100 UF3005 to UF3007 10 TJ = 25 C, f= 1MHz 1 UF3004 10 UF3001 to UF3004 UF3005 - UF3007 1.0 TJ = 25 C PULSE WIDTH 300us 0.1 0.1 1.0 4 100 0.2 REVERSE VOLTAGE , VOLTS CTC0110 Ver. 2.0 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 INSTANTANEOUS FORWARD VOLTAGE , VOLTS 2 of 2 UF3001 thru UF3007