March 6, 2007 SMD INDUCTOR DR352-2 SERIES Features z z z z Surface Mount Beads Operating Temp. -20°C to +80°C Tinned Leads with Leaded Solder is Available (note 6) Custom Impedance Values Available ELECTRICAL SPECIFICATIONS AT 25ºC IMPEDANCE (Ω) 25MHz 100MHz 50 76 RDC (mΩ) 0.90 IRATED MAX (A) 0.50 MECHANICAL OUTLINES Notes: 1. All dimensions are shown in millimeter “mm” 2. General tolerance ±0.2mm, unless other specified 3. Irms for an approximate 45°C temperature rise 4. Isat for an approximate 20% drop maximum of the nominal value 5. Tape and reel quantity, 2000 pcs/reel 6. For non-RoHS parts replace DR prefix with 42- (e.g. DR352-2 becomes 42-352-2) 7. Terminal finish is compliant to RoHS requirements. Solder in accordance with J-STD-020C DATATRONIC: 28151 Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Toll Free Tel: 888-889-5391 Fax: 951-928-7701 Email: [email protected] 499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290 All specifications are subject to change without notice.