March 6, 2007 SMD INDUCTOR DR356-2 SERIES Features z Height: 4.0mm Max z Current Rating: up to 40 ADC z Operating Temperature: -40°C to +85°C z Inductance Range: 0.25µH to 2.7µH z Tinned Leads with Leaded Solder is Available (note 3) Electrical Specifications @ 25ºC INDUCTANCE (µH) 0.1V @ 100kHz 0.25 ± 30% 0.6 ± 30% 1.2 ± 20% 1.8 ± 20% 2.7 ± 20% PART NUMBER DR356-2-251 DR356-2-601 DR356-2-122 DR356-2-182 DR356-2-272 DCR (mΩ) Max. 1.0 2.5 3.4 12 14 RATED DC CURRENT AMPS Max. 40 30 22 12 10 MECHANICAL OUTLINES: .157 MAX. 4,00 .515 MAX. 13,10 1 DR356-2 XXX D/C 2 .094 REF. 2,40 2 1 .531 MAX. 13,50 .118 REF. 3,00 1 .177 4,50 2 SCHEMATIC .197 5,00 .165 4,20 SUGGESTED PAD LAYOUT NOTES: 1. Dimensions are shown in inches/millimeters Unless otherwise specified, tolerance = Inches: ±0.010 = Millimeters: ±0,25 2. Tape & Reel Packaging, 500 pieces per reel. 3. For non-RoHS parts replace DR prefix with 42- (e.g. DR356-2 becomes 42-356-2) 4. Terminal finish is compliant to RoHS requirements. Solder in accordance with J-STD-020C DATATRONIC: 28151 Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Toll Free Tel: 888-889-5391 Fax: 951-928-7701 Email: [email protected] 499 King’s Road, Hong Kong Tel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290 All specifications are subject to change without notice.