17JE Series RoHS Compliant Straight DIP Type FEATURE ●DIP-type connector mounted directly on PCB. Con - tact tail is straight, allowing vertical mounting of connector on PCB. ●Number of contacts : 9, 15, 25 and 37 ●Press-fabricated contacts. Standard surface finish ing of contacts : Connections Au-plated (0.4 μ) on Ni-substrata, tails Sn-Ag plated. ●To fasten engagement with counterpart, an engaging block and a hexagon-head nut can be attached, allowing connection of PCB's and metal shell's grounding and improving resistance against EMI. Ｇ SPECIFICATION 17JE Voltage Rating 300V AC (r.m.s.) Current Rating 5A/Contact Dielectric Withstanding Voltage 1,000V AC (r.m.s.) for 1 minute Insulation Resistance 1,000MΩ min. at 500V DC Contact Resistance 15mΩmax. Temperature －25℃ to ＋85℃ MATERIAL/FINISH P/N MATERIAL/FINISH Block Polyamide resin (UL94V-0)/Black Shell Steel/Nickel Plating Contact Copper alloy/Mating area : 0.4μm, Gold over Nickel Plating Tail area : Sn-Ag over Nickel Plating Eyelet Brass/Nickel Plating 5 ● ● 17JE Series Unit : mm 17JE-13250-37-FA NO.OF.CONTACTS 09, 15, 25, 37 Type ３ (REAR MOUNTING) B A 2-φ3.1 ± 0.1 B H min. 12.5 I 4-R3.2 10° 11.4 min. U 2-φ3.2 ± 0.1 Panel cut-out dimensions Panel Thickness : 0.8 to 1.3 7.8 Ｇ 6.1 6.9 3.2 2.9 0.3 17JE 0.7 0.5 1.0 2.84 C D n-φ1 ± 0.1 F ± 0.1 E G 2-φ3.2 ± 0.1 E ± 0.1 2.84 ± 0.1 9 Dia. Hole E ± 0.1 D ± 0.1 B ± 0.1 G F P.C.B. Mounting Dimensions (REFERENCE) P/N A B C D E F G H 17JE-13090-37-FA 30.8 24.99 18.99 10.98 17JE-13150-37-FA 39.1 33.32 27.32 19.20 2.74 8.22 1.37 20.5 2.74 16.44 1.37 28.8 17JE-13250-37-FA 53.0 47.04 41.04 17JE-13370-37-FA 69.3 63.50 57.50 33.12 2.76 30.36 1.38 42.5 49.68 2.76 46.92 1.38 59.1 6 ● ● 17JE Series Unit : mm 17JE-13250-37(D2A)-FA DEVIATION With Locking Device and Pan head Screw NO.OF.CONTACTS 09, 15, 25, 37 J 7.8 6.1 6.3 Ｇ 17JE 0.5 3.2 0.3 0.7 12.5 Thread Size A :M2.6×0.45 B :M3×0.5 C :＃4-40UNC B 1.0 2.84 C A D 13 min. Type １ E 9 K min. 4-R1 * Connector cannot be fixed on panel. F G No.of Contacts A B C D E F G J K 09 30.8 24.99 18.99 10.98 2.74 8.22 1.37 33.09 34.09 15 39.1 33.32 27.32 19.20 2.74 16.44 1.37 41.42 42.42 25 53.0 47.04 41.04 33.12 2.76 30.36 1.38 55.42 56.14 37 69.3 63.50 57.50 49.68 2.76 46.92 1.38 71.60 72.60 7 ● ● 17JE Series Unit : mm Mounting Straight DIP Type (□ stands for type of engaging screw.) Reference drawing of panel mounting hole PCB Spacer Type １ Panel Panel K min. Stud Connector Stud Connector 13 min. Screw Screw 4-R1 * Connector cannot be fixed on panel. Stud (17L-002□) PCB Nut Connector Jack・ socket M± 0.3 4-R2.5 R Ｇ B ± 0.1 Square-head nut PCB thickness : t=1.6 Jack Socket (17L-003□1) Earth plate (Board Lock) Connector Jack・ socket Nut * Connector cannot be fixed on panel. Type ３ 2-φ3.2 ± 0.1 B ± 0.1 H min. 4-R3.2 10° Square-head nut Jack Socket (17L-003□3) □ : Jack socket thread size (REAR MOUNTING) Spacer ※ Connector Cambetixed an Panel (Panel thicknees :0.8 to 1.3) Ａ :M2.6×0.45(Standard) Ｂ :M3×0.5 Ｃ :#4-40UNC No.of Contacts B H K L M 9 24.99 20.5 34.09 31.0 18.5 15 33.32 28.8 42.42 39.3 26.8 25 47.04 42.5 56.14 53.2 40.5 37 63.50 59.1 72.60 69.5 57.0 8 ● ● 11.4 min. Nut 4.8 17JE 10 +0.3 -0 L min. 6.5± 0.2 6.1 Nut Type ２ Earth plate (Board Lock) Spacer 17JE Series Unit : mm List of Straight Type Deviations (Shows combinations of ground tab/spacers and stud/jack sockets). * “Equipped with” as used here means that connector has an accessory built in. “Bundled (not built in)” as used here means that connector is supplied with an accessory not built in but bundled with it 17JE-13□□0-37-FA 17JE-23□□0-37-FA Designations of Ground Tab and Spacer 17J-011-FA Board Lock 57D-149-6A Spacer φ3.3 Type1 Type not fastened to panel from both sides 3.6 Stud Jack Socket Designation 17L-002□ With locking device and pan head screw and 17L-002□ 17JE-13□□0-37(D2□)-FA 17L-003□1 Equipped With M3 hexagon With M3 hexagon nut and 17L-003□1 nut and 17L-003□1 17JE-13□□0-37(D3□)-FA 17JE-13□□0-37(D23□)-FA 6.5 Type not fastened to panel from both sides 6.1 Ｇ Type2 M3 17L-003□2-CF 13 6.1 Equipped With M3 hexagon nut and 17L-003□2-CF 17JE-13□□0-37(D28□)-CA M3 12 6.1 17L-003□4-CF 17L-003□3 7.8 Type fastened to panel from both sides (panel thickness : 1.3 max.) Equipped With M3 hexagon nut and 17L-003□4-CF 17JE-13□□0-37(D16□)-CA M3 With Jack Sockets and hexagon nut 17L-003□3 17JE-13□□0-37(D4□)-FA Equipped With M3 hexagon nut and 17L-003□3 17JE-13□□0-37(D31□)-FA 4.8 Type3 M3 With Jack Sockets and 17L-003□3 17JE-13□□0-37(D36□)-FA 17L-003□6-CF Equipped With M3 hexagon nut and 17L-003□6-CF 17JE-13□□0-37(D71□)-CA 4.8 13 Stands for on combination. 17JE With Jack Sockets and 17L-003□6-CF 17JE-13□□0-37(D30□)-CA M3 is recommended. 9 ● ● □stands for type of engaging screw. Ａ :M2.6×0.45(Standard) Ｂ :M3×0.5 Ｃ :#4-40UNC