XFP Connector SPT Series / 10Gbps Conforming Standard XFP ◆ OUTLINE SPT series is a connector and cage assembly which is compatible to 10Gigabit Small Form-factor Pluggable(XFP) specification of Multi Source Agreement(MSA) for 10G optical transceiver. ◆ FEATURE ・ Right Angle 0.8mm pitch, 30 pins SMT connector ・ Excellent EMI shield ・ Cage assembly is press-fit mounting and serves as a guide rail for transceivers. ・ 4.2mm and 6.5mm height heat radiation pins are available. ・ RoHS Compliant ◆ APPLICATIONS 10G Fiber Channel, 10G Ethernet, High-end Server ◆ SPECIFICATION Rated Voltage 120V AC(r.m.s.) Rated Current 0.5A / Contact Dielectric Withstanding voltage 350V AC(r.m.s.) for 1 Minute Insulation Resistance 100M Ω Min. at 250V DC Contact Resistance 30m Ω Max. ◆ MATERIAL/FINISH Item Contact 090703 RoHS Compliant Compliant Material/Finish Copper Alloy/ Contact Area: Au over Ni Plating Tail Area: Au(Flash) over Ni Plating Housing 350V AC(r.m.s.) for 1 minute Cage, Clip, Heat Sink 30m Ω max. ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp SPT Series Unit：mm ○ 0.8mm PITCH CONNECTOR SPT-RSB30B-12-FG 11.20 0.80 5.80 7.70 REF 0.40 13.60 11.20 1.00 5.80 0.80 4.10 11.20 1.30 MAX. 5.10 REF 0.06 A B 30 PLC φ1.55±0.05 0.10 A B 2 PLC 0.40 2.60 MIN. STAND OFF SURFACES B 2.00±0.05 7.40 REF 1.70 REF 13.40 4.10 15.00 REF A 13.60 0.50±0.03 30 PLC 0.06 A B PCB LAYOUT ○ CAGE for XFP SPT-R030-CA 23.0 MAX DL CL 7.0 22.20 2.60 13.40 64.03 REF 4.10 4.10 0.90 B A 7.60 0.90 3.60 5×9.00 Pitch= 45.00 2-φ1.55±0.05 0.10 A B 9.00 PCB MOUNTING DIMENSIONS (REFERENCE) 0.50±0.03 0.06 A B 2.00±0.05 0.06 A B Detail X ○ HEAT SINK and CLIP 33.00REF 18.00 22.00 SPT-R030-HS2 □ Height of Fin A : 4.2mm B : 6.5mm X See P/N 57.30 REF SPT-R030-CP 32.00 19.45REF 11.80 REF 2.00 3PLC ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 2 14.90 0.80 0.80 φ1.05±0.05 0.10 A B 14PLC 0.40 16.30 13.60 19.00 2.70 X 11.50 9.00 15.30 5×9.00 Pitch= 45.00