4GBJ10005 THRU 4GBJ1010 GLASS PASSIVATED BRIDGE RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 10.0 Ampere FEATURES GBJ4 Glass passivated chip junction ● Reliable low cost construction utilizing molded plastic technique ● Ideal for printed circuit board ● Low reverse leakage current ● Low forward voltage drop ● High surge current capabiliy ● MECHANICAL DATA ● ● ● ● Case:Molded plastic, GBJ Terminals : Terminals: Leads solderable per MIL-STD-202 method 208 guaranteed Epoxy: UL 94V-0 rate flame retardant Mounting Position: Any Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Symbol 4GBJ 10005 4GBJ 1001 4GBJ 1002 4GBJ 1004 4GBJ 1006 4GBJ 1008 4GBJ 1010 Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V Average Rectified Output Current @TC = 115°C (Note 1) IO 10 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 220 A Forward Voltage per diode VFM 1.1 V IR 10 500 µA Peak Reverse Current At Rated DC Blocking Voltage @IF = 5.0A @TA = 25°C @TA = 125°C Typical Thermal Resistance per leg (Note 2) R JA 26 °C/W Typical Thermal Resistance per leg (Note 1) R JC 1.9 °C/W -55 to +150 °C Operating and Storage Temperature Range Tj, TSTG Note: 1. Device mounted on 100 x 100 x 1.6mm thick Al plate heatsink. 2. Device mounted on P.C.B. without heatsink. 4GBJ10005 THRU 4GBJ1010 RATINGS AND CHARACTERISTIC CURVES FIG.2-MAXMUN NON-REPETITIVE SURGE CURRENT FIG.1-FORWARD CURRENT DERATING CURVE WITH HEATSINK PEAK FORWARD SURGE CURRENT , AMPERES AVERAGE FORWARD OUTPUT CURRENT AMPERES 10.0 220 8.0 6.0 WITHOUT HEATSINK 4.0 2.0 1.0 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0 20 40 60 80 100 120 T J=150 SINGLE -SINE - WAVE (JEDEC METHOD) 0 1 2 5 10 20 50 100 NUMBER OF CYCLES AT 60Hz 140 CASE TEMPERATURE, FIG.4-TYPICAL FORWARD CHARACTERISTICS FIG.3-TYPICAL JUNCTION CAPACITANCE 10 INSTANTANEOUS FORWARD CURRENT, (A) 1.0 10 T J=25 ,f=1MHZ 1.0 1.0 10.0 T J = 25°C PULSE WIDTH 300us 0.1 0.01 100 REVERSE VOLTAGE,(VOLTS) 0 0.2 0.4 1000 T J=125 100 T J=100 10 T J=50 1.0 T J=25 0.1 0 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG.5-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT ,(uA) CAPACITANCE,(pF) 100 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) 1.8