T•P T•P DU RO C NEW TERMINAL BLOCKS 10mm PITCH 45° MOUNT DU RO C 10mm pitch Professional rising clamp Flame retardant material 4mm2 wire acceptance UL/ CSA approved SPECIFICATION Rating: Dielectric Strength: Insulation Resistance: Working temperature: Short Period: Moulding: Pin/terminal: Rising clamp: Screw/torque: Recommended PCB hole size: 17.5A/750V ≥1.25KV/60sec ≥5MΩ -20°C to 125°C 160°C UL94V-0 flame retardant PA66 5µ tinned, nickel plated brass OUTLINE DRAWING L ø1.3mm ORDERING INFORMATION L 12.5 L 12 4.5 Zinc plated steel M2.5 steel, 6µ zinc colour passivated and tropicalised/0.4Nm L DBC TB 57 /2 Dubilier Connectors Series Style Nº of Ways Terminal Block 2 = 2 ways 3 = 3 ways 6.5 10 L = Length TERMINAL BLOCKS 10MM PITCH 18 POLE RISING CLAMP 10mm pitch UL/CE/VDE approved Professional rising clamp terminal Easily cut to required number of poles 18 pole strip 4mm2 wire acceptance SPECIFICATION Electrical Characteristics Rating Current: Dielectric Voltage: Insulation Resistance: Operating Temperature: Short Period: Moulding: Pin/terminal: Rising clamp: Screw/torque: Recommended PCB hole size: 17.5A/750V ≥ 2.5kV/60sec ≥ 5MΩ -20°C to +125°C 160°C ø1.3mm ORDERING INFORMATION OUTLINE DRAWING SECTION 18 L UL94-V0 flame retardant Lexan 5µ tinned, nickel plated brass Zinc plated steel M2.5 steel, 6µ zinc colour passivated and tropicalised/0.4Nm L DBC TB 25 /2 Dubilier Connectors Series Style No of Ways Terminal Blocks 4.5 15.5 8.5 10 4.25 2 = 2ways 3 = 3ways * other number of ways are available Please consult the office for further details L= Length 386 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758