EPSONTOYOCOM TCO-2000

Crystal oscillator
Epson Toyocom
Product Number (please contact us)
X1G00Xxxxxxxx00
VOLTAGE -CONTROLLED CRYSTAL OSCILLATOR (VCXO)
TCO - 2000 / 2100 series
•Frequency range
•Supply voltage
•Frequency control range
•Features
: 1 MHz to 800 MHz
: 3.3 V or 5.0 V
: ±100 × 10-6 Min.
: High reliability(20 years aging)
: Wide frequency control range
: Low phase noise, low jitter
: With HFF-XTAL technology
Fundamental oscillation (60 MHz to 230 MHz)
Multiplier oscillation (fo≥230 MHz)
Actual
Actual size
size
TCO-2000 Series
TCO-2100 Series
Specifications (characteristics)
Item
APR
Rin
Specifications
TCO-2001
TCO-2003
TCO-2002
TCO-2004
TCO-2101
TCO-2103
TCO-2102
TCO-2104
8.000 MHz to 78.000 MHz
8.000 MHz to 125.000 MHz
5.0 V ±0.25 V
3.3 V ±0.165 V
-45 °C to +90 °C
-40 °C to +85 °C
As per table 1
50 mA Max.
As per table 1.
As per table 1.
(VC=2.5 V ±2 V)
(VC=1.65 V ±1.65 V)
As per table 1
100 kΩ Min.
-
Positive slope
Symbol
fO
Output frequency range
Supply voltage
Storage temperature range
Operating temperature range
Frequency tolerance
Current consumption
VCC
T_stg
T_use
f_tol
ICC
Frequency control range
f_cont
Absolute pull range
Input resistance
Frequency change polarity
Output load condition (TTL)
L_TTL
Output load condition (CMOS) L_CMOS
Start-up time
t_str
Frequency aging
f_aging
2 TTL Max.
-
2 TTL Max.
15 pF Max.
10 ms Max. *1
As per table 1
Remarks
4 pin
6 pin
Store as bare product after unpacking
-40 °C to +85 °C
DC level
VC = 0 V to 3.3 V
or VC =0.5 V to 4.5 V
15 pF Max.
+25 °C
Specifications (characteristics)
Item
Specifications
TCO-2106
TCO-2107
1.000 MHz to 80.000 MHz
3.3 V ±0.165 V
-45 °C to +90 °C
-40 °C to +85 °C
As per table 1
30 mA Max.
As per table 1
As per table 1
100 kΩ Min.
Positive slope
2 TTL Max.
―
―
15 pF Max.
10 ms Max. *1
As per table 1
Symbol
Output frequency range
fO
Supply voltage
VCC
Storage temperature range
T_stg
Operating temperature range
T_use
Frequency tolerance
f_tol
Current consumption
ICC
Frequency control range
f_cont
Absolute pull range
APR
Input resistance
Rin
Frequency change polarity
―
Output load condition (TTL)
L_TTL
Output load condition (CMOS) L_CMOS
Start-up time
t_str
Frequency aging
f_aging
Remarks
6pin, OE function
Store as bare product after unpacking
-40 °C to +85 °C
VC= 1.65 V ±1.65 V
DC level
VC= 0 V to 3.3 V
+25 °C
Specifications (characteristics)
Item
Output frequency range
Symbol
fO
Supply voltage
Storage temperature range
Operating temperature range
Frequency tolerance
Current consumption
VCC
T_stg
T_use
f_tol
ICC
Frequency control range
f_cont
Absolute pull range
Input resistance
Frequency change polarity
Output level
Start-up time
Frequency aging
APR
Rin
TCO-2111
60.000 MHz to 800.000 MHz
3.3 V ±0.165 V
5.0 V ±0.25 V
-45 °C to +90 °C
-40 °C to +85 °C
As per table 1
65 mA Max.
As per table 1
As per table 1
(VC= 1.65 V ±1.65 V) (VC= 2.5 V ±2 V)
As per table 1
100 kΩ Min.
―
―
t_str
f_aging
Specifications
TCO-2112
Remarks
TCO-2114
60.000 MHz to
230.000 MHz
3.3 V ±0.165 V
Store as bare product after unpacking
-40 °C to +85 °C
40 mA Max.
As per table 1
(VC= 1.65 V ±1.65 V)
DC level
VC = 0 V to 3.3 V
or VC =0.5 V to 4.5 V
Positive slope
LV-PECL
PECL
10 ms Max. *1
As per table 1
6 pin
LVDS
http://www.epsontoyocom.co.jp
+25 °C
Crystal oscillator
Epson Toyocom
Specifications (characteristics)
Item
Specifications
TCO-2131
60.000 MHz to 700.000 MHz
3.3 V ±0.165 V
-45 °C to +90 °C
-40 °C to +85 °C
As per table 1
75 mA Max.
As per table 1
As per table 1
100 kΩ Min.
Positive slope
LV-PECL
10 ms Max. *1.
As per table 1
Symbol
Output frequency range
Supply voltage
Storage temperature range
Operating temperature range
Frequency tolerance
Current consumption
Frequency control range
Absolute pull range
Input resistance
Frequency change polarity
Output load condition
Start-up time
Frequency aging
fO
VCC
T_stg
T_use
f_tol
ICC
f_cont
APR
Rin
―
―
t_str
f_aging
Remarks
6pin, OE function
Store as bare product after unpacking
-40 °C to +85 °C
VC= 1.65 V ±1.65 V
DC level
VC= 0 V to 3.3 V
+25 °C
Table 1. Frequency tolerance, Absolute pull range and aging (TCO-2100-xx)
xx
AA
AB
BA
BB
Frequency tolerance
Absolute pull range *4
±50 × 10-6 Min.
±100 × 10-6 Min.
±50 × 10-6 Min.
±100 × 10-6 Min.
±50 × 10-6 Max. *2
±60 × 10-6 Max. *3
(Frequency control range)
±100 × 10-6 Min.
±150 × 10-6 Min.
±110 × 10-6 Min.
±160 × 10-6 Min.
Aging
1year
(First year)
20 years
*1 Time at minimum supply voltage to be 0 s.
*2 This includes initial frequency tolerance, temperature variation, supply voltage variation and aging (+25℃, 1 year).
*3 This includes initial frequency tolerance, temperature variation, supply voltage variation and aging (+25℃, 20 years).
*4 Absolute pull range = Frequency control range - Frequency tolerance
(Unit:mm)
External dimensions
●TCO-2000 series
8.75
7.62
#3
0.5
0.25 Min.
0.25 Min.
#2
#3
#6
Pin map
Pin
1
2
3
4
5
6
#5
#1
●TCO-2000 series
#2
#3
7.62
Index
#6
#4
(Unit:mm)
#5
#4
Pin map
CONNECTION
VC
N.C.
GND/case
OUT
N.C.
V CC
External dimensions
Sol der Sealing
5.08
4.1
4.7 Max.
Index
Index
CONNECTION
VC
GND/case
OUT
VCC
Pin
TCO-2106/2107
1
2
3
4
5
6
OE
OUT
N.C.
CONNECTION
TCO-2110 series TCO-2131
VC
N.C.
OE
GND/case
OUT1(Positive)
OUT2(Negative)
VCC
OE terminal
●TCO-2106 / 2107
●TCO-2100 series
1.27
1.27
3.0
OE pin = "H" or "open" : Specified frequency output.
OE pin = "L" : Output is high impedance, oscillation stops.
7.62
3.0
7.62
Marking
0.5
#1
Index
#4
Sol der Sealing
5.08
4.1
4.7 Max.
7.62
9.8 Max.
8.75
9.8 Max.
8.75
9.8 Max.
0.25 Min.
0.5
#2
Marking
Index
4.1
4.7 Max.
Sol der Sealing
5.08
Pin map
Pin
1
2
3
4
1.5±0.1
1.5±0.1
Marking
#1
13.9±0.1
13.9±0.1
1.5±0.1
Index
●TCO-2106/2107/2111/2112/2113/2114/2131
●TCO-2101/2102/2103/2104
13.9±0.1
●TCO-2131
OE pin = "L" or "open" : Specified frequency output.
OE pin = "H" : Output is high impedance, oscillation stops.
5.08
5.08
http://www.epsontoyocom.co.jp
“QMEMS” EPSON TOYOCOM
In order to meet customer needs in a rapidly advancing digital,
broadband and ubiquitous society, we are committed to offering products
that are one step ahead of the market and a rank above the rest in quality.
To achieve our goals, we follow a “3D (three device) strategy” designed to
drive both horizontal and vertical growth. We will to grow our three device
categories of “Timing Devices”, ”Sensing Devices” and “Optical Devices”,
and expand vertical growth through a combination of products from these
categories.
A Quartz MEMS is any high added value quartz device that exploits the
characteristics of quartz crystal material but that is produced using MEMS
(micro-electro-mechanical system) processing technology.
Market needs are advancing faster than previously imagined toward
smaller, more stable crystal products, but we will stay ahead of the curve
by rolling out products that exceed market speed and quality
requirements. We want to further accelerate the 3D strategy by QMEMS.
Quartz devices have become crucial in the network environment where
products are increasingly intended for broadband, ubiquitous applications
and where various types of terminals can transfer information almost
immediately via LAN and WAN on a global scale. Epson Toyocom
Corporation addresses every single aspect within a network environment.
The new corporation offers “Digital Convergence” solutions to problems
arising with products for consumer use, such as, core network systems
and automotive systems.
PROMOTION OF ENVIRONMENTAL MANAGEMENT SYSTEM
CONFORMING TO INTERNATIONAL STANDARDS
At Epson Toyocom, all environmental initiatives operate under
ISO 14000 is an international standard for environmental management
the Plan-Do-Check-Action(PDCA) cycle designed to achieve
that was established by the International Standards Organization in 1996
continuous improvements. The environmental management
against the background of growing concern regarding global warming,
system (EMS) operates under the ISO 14001 environmental
destruction of the ozone layer and global deforestation
management standard.
All of our major manufacturing and non-manufacturing sites,in Japan and overseas, completed the acquisition of ISO 14001 certification.
In the future, new group companies will be expected to acquire the certification around the third year of operations.
WORKING FOR HIGH QUALITY
In order provide high quality and reliable products and services than meet customer needs,
Epson Toyocom made early efforts towards obtaining ISO9000 series certification and has acquired ISO9001 for all business establishments in Japan
and abroad. We have also acquired ISO/TS 16949 certification that is requested strongly by major automotive manufacturers as standard.
QS-9000 is an enhanced standard for quality assurance systems
formulated by leading U.S. automobile manufacturers based on the
international ISO 9000 series.
ISO/TS 16949 is a global standard based on QS-9000, a severe standard
corresponding to the requirements from the automobile industry.
►Explanation of the mark that are using it for the catalog
►Pb free.
►Complies with EU RoHS directive.
►Pb free terminal designed. Contains Pb in products exempted by RoHS directive.
(Contains Pb in sealing glass, high melting temperature type solder or other.)
►Complies with EU RoHS directive.
►The products have been designed for high reliability applications such as Automotive.
Notice
●This material is subject to change without notice.
●Any part of this material may not be reproduced or duplicated in any form or any means without the written permission of Epson Toyocom.
●The information, applied circuitry, programming, usage, etc., written in this material is intended for reference only. Epson Toyocom does not
assume any liability for the occurrence of infringing on any patent or copyright of a third party. This material does not authorize the licensing for
any patent or intellectual copyrights.
●Any product described in this material may contain technology or the subject relating to strategic products under the control of the Foreign
Exchange and Foreign Trade Law of Japan and may require an export license from the Ministry of International Trade and Industry or other
approval from another government agency.
●You are requested not to use the products (and any technical information furnished, if any) for the development and/or manufacture of weapon
of mass destruction or for other military purposes. You are also requested that you would not make the products available to any third party
who may use the products for such prohibited purposes.
●These products are intended for general use in electronic equipment. When using them in specific applications that require extremely high
reliability, such as the applications stated below, you must obtain permission from Epson Toyocom in advance.
/ Space equipment (artificial satellites, rockets, etc.) / Transportation vehicles and related (automobiles, aircraft, trains, vessels, etc.)
/ Medical instruments to sustain life / Submarine transmitters / Power stations and related / Fire work equipment and security equipment
/ traffic control equipment / and others requiring equivalent reliability.
● In this new crystal master for Epson Toyocom, product codes and markings will remain as previously identified prior to the merger.
Due to the on-going strategy of gradual unification of part numbers, please review product codes and markings, as they will change during the
course of the coming months.
We apologize for the inconvenience, but we will eventually have a unified part numbering system for Epson Toyocom that will be user friendly.