ST3 Series High Amperage Water Protection Heavy Duty Rear Panel Mount FEATURES: • Heavy Duty Rating with UL Approvals • Tab, Screw, and Solder Terminal Options • Rubber Boot for Water and Dust Protection SPECIFICATIONS: RATING: 24A 125VAC [cULus] 15A 277VAC [cULus] 2HP 125-250VAC [cULus] TOGGLE TEMPERATURE: -20°C to 85°C ELECTRICAL LIFE: 6,000 Cycles CONTACT RESISTANCE: 50m Max. INSULATION RESISTANCE: 800M Min. at 500VDC DIELECTRIC STRENGTH: 1,500VAC for 1 Minute MATERIALS: Series Terminal Function Rating Actuator Type Bushing Type ST3 - 3 Pole 1 - 4.8mm Tabs 2 - Solder 4 - 6.3mm Tabs 6 - Screw 3 Pole: R - Off-On S - On-On T - On-Off-On E - 24A 125VAC 0 - Standard Bat 0 - M12x1.0 2 - 15/32"-32UNS Variable Length Wxx - Wire Leads (xx in Inches) Note: Terminal bridging options available. ST34TE00 ST34RE00 Accessories Series Type Options ACC Rubber Boot: B03 - For Standard Bat Colors for Boot: 2 - Black Marking Plates: M01 - ON/Off Colors for Marking Plates: 3 - Black, Red, and Silver Hardware: N02 - Knurled Nut Threading: 3 - 15/32"-32UNS 5 - M12x1.0 LAMB INDUSTRIES EXAMPLE PART NUMBERS: ST34RE00 3P Off-On Standard Actuator/Bushing, 6.3mm tab Ph: 503-297-8878 • Fax: 503-297-8879 26 P.O. Box 25110 • Portland, OR 97298 USA • www.lambind.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE BODY: Phenolic, UL94 V-0 ACTUATOR: Nickel Plated Brass BUSHING: Nickel Plated Brass HOUSING: Stainless Steel CONTACTS: Silver Alloy TERMINALS: Silver Plated Brass