PRODUCT DATA SHEET P7605 Family POWER INDUCTOR Features Applications ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ Lead-free (Pb-free) RoHS compliant High Current (Saturation to 20A) Low DCR (to 9mΩ) Low profile (to <3mm) Surface Mount Flat top for pick & place DC-DC Converters High Current/Low Voltage Converters Notebook and handheld equipment Flash memory programmers DESCRIPTION The P7605 family comprises unshielded power inductors. high current, The 3308, 3316 and 3340 sizes share the same footprint, but differ in height. Six mechanical sizes are available, offering compact solutions for applications requiring high energy storage. The P7605 family of components is compliant with RoHS Directive 2002/95/EC, and suitable for Pb-free and conventional placement and reflow. The 1608 size has a profile less than 3mm and employs a ceramic base to assist heat transfer, enabling a very high current density. ETALDOC 835/2 P7605-1608 P7605-2012 P7605-3308 P7605-3316 P7605-3340 P7605-5022 Page 1 of 7 July 2005 P7605 CONSTRUCTION P7605-1608 dimensions P7605-2012 dimensions P7605-3308 dimensions Fig. 1 Fig. 2 Fig. 3 5.0± 0.3 2.1 typ 6.0 typ 2.4 4.06 10.0± 0.2 2.4 typ 7.6 typ PCB PATTERN 2.4 typ 2.8 2.2 3.56 1.4 2.1 typ e3 2.2 typ 1.02 typ e3 MARKING INDUCTANCE CODE 2.0 typ 4.32 typ MARKING INDUCTANCE CODE 2.7 typ 1.02 typ 2.92 max e4 MARKING INDUCTANCE CODE 12.7± 0.2 8.0± 0.2 4.45 max 10.5± 0.2 3.0 ± 0.3 6.6 max 3.0 5.7 PCB PATTERN 7.3 PCB PATTERN P7605-3316 dimensions P7605-3340 dimensions P7605-5022 dimensions Fig. 4 Fig. 5 Fig. 6 12.7± 0.2 7.6 typ 7.3 PCB PATTERN 2.4 typ 15.0± 0.3 e3 2.4 typ 7.0± 0.5 11.0± 0.5 2.4 typ 13.3 typ 3.0 2.4 typ 2.8 2.8 2.8 3.0 e3 MARKING INDUCTANCE CODE 2.2 typ 2.4 typ MARKING INDUCTANCE CODE 2.2 typ 10.0± 0.2 7.6 typ 2.2 typ 2.4 typ 5.0 ± 0.3 e3 MARKING INDUCTANCE CODE 18.4± 0.3 10.0± 0.2 12.7± 0.2 7.3 PCB PATTERN 3.0 12.7 PCB PATTERN Dimensions shown are in millimetres. Terminal plating JESD97 category = e3 or e4 as shown. Recommended reflow solder profile: 2 minutes @ 150-200ºC, 10 seconds @ 260ºC; time above 217ºC 60 seconds maximum. ETALDOC 835/2 Page 2 of 7 July 2005 P7605 SPECIFICATIONS Electrical 1608 size Part Number Inductance (1) (µH) DCR (Ω) Max P7605-1608-1R0M P7605-1608-1R5M P7605-1608-2R2M P7605-1608-3R3M P7605-1608-4R7M P7605-1608-6R8M P7605-1608-100M P7605-1608-150M P7605-1608-220M P7605-1608-330M P7605-1608-470M P7605-1608-680M P7605-1608-101M P7605-1608-151M P7605-1608-221M P7605-1608-331M P7605-1608-471M P7605-1608-681M P7605-1608-102M 1.0±20% 1.5±20% 2.2±20% 3.3±20% 4.7±20% 6.8±20% 10±20% 15±20% 22±20% 33±20% 47±20% 68±20% 100±20% 150±20% 220±20% 330±20% 470±20% 680±20% 1000±20% 0.05 0.05 0.07 0.08 0.09 0.13 0.16 0.23 0.37 0.51 0.64 0.86 1.27 2.00 3.11 3.80 5.06 9.20 13.8 SRF (MHz) 130 115 90 70 50 45 35 30 20 15 14 11 9 6 5 5 4 3 2 (2) Rated Current (3) IRMS (A) 2.9 2.8 2.4 2.0 1.5 1.4 1.1 1.0 0.8 0.6 0.5 0.4 0.3 0.25 0.20 0.16 0.15 0.12 0.07 (4) Isat (A) 2.9 2.6 2.3 2.0 1.5 1.2 1.1 0.9 0.7 0.58 0.5 0.4 0.3 0.27 0.22 0.18 0.16 0.14 0.10 Notes 1. Inductance measured at 100kHz, 100mV. 2. SRF (Self resonant Frequency) is typical and for reference only. 3. Rated current is the current at which the temperature rise is 15ºC typical. Note that for this 1608 size, the DC current at which saturation occurs is lower than the rated AC current. 4. Saturation Current, Isat, is the DC current at which the zero current inductance drops by 10% (typ). 5. Operating temperature -25ºC to +85ºC. 6. For non-standard inductance values, please contact Profec. ETALDOC 835/2 Page 3 of 7 July 2005 P7605 2012 size Part Number P7605-2012-3R3M P7605-2012-4R7M P7605-2012-6R8M P7605-2012-100M P7605-2012-150M P7605-2012-220M P7605-2012-330M P7605-2012-470M P7605-2012-680M P7605-2012-101M P7605-2012-151M P7605-2012-221M P7605-2012-331M Inductance (1) (µH) DCR (Ω) Max 3.3±20% 4.7±20% 6.8±20% 10±20% 15±20% 22±20% 33±20% 47±20% 68±20% 100±20% 150±20% 220±20% 330±20% 0.030 0.035 0.05 0.06 0.08 0.13 0.18 0.26 0.35 0.58 0.75 1.05 1.60 SRF (MHz) (2) 50 40 30 23 20 16 12 11 9 7 5 4 3.5 Rated Current (3) IRMS (A) 3.7 3.3 2.7 2.3 2.1 1.6 1.3 1.1 1.0 0.70 0.60 0.50 0.45 (4) Isat (A) 7 6 5 4 3 2.5 2.0 1.8 1.5 1.0 0.9 0.8 0.6 Notes 1. 2. 3. 4. 5. 6. Inductance measured at 100kHz, 100mV. SRF (Self resonant Frequency) is typical and for reference only. Rated current is the current at which the temperature rise is 40ºC typical. Saturation Current, Isat, is the DC current at which the zero current inductance drops by 10% (typ). Operating temperature -25ºC to +85ºC. For non-standard inductance values, please contact Profec. 3308 size Part Number Inductance (1) (µH) DCR (Ω) Max P7605-3308-100M P7605-3308-150M P7605-3308-220M P7605-3308-330M P7605-3308-470M P7605-3308-680M P7605-3308-101M P7605-3308-151M P7605-3308-221M P7605-3308-331M P7605-3308-471M P7605-3308-681M P7605-3308-102M 10±20% 15±20% 22±20% 33±20% 47±20% 68±20% 100±20% 150±20% 220±20% 330±20% 470±20% 681±20% 1000±20% 0.11 0.15 0.23 0.30 0.39 0.66 0.84 1.2 1.9 2.7 4.0 5.3 8.4 SRF (MHz) 35 33 25 19 14 12 10 8 6 5 4 3 2.5 (2) Rated Current (3) IRMS (A) 2.0 1.5 1.3 1.1 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.05 (4) Isat (A) 2.4 2.0 1.6 1.4 1.0 0.9 0.7 0.6 0.5 0.4 0.3 0.2 0.1 Notes 1. 2. 3. 4. 5. 6. Inductance measured at 100kHz, 100mV. SRF (Self resonant Frequency) is typical and for reference only. Rated current is the current at which the temperature rise is 30ºC typical. Saturation Current, Isat, is the DC current at which the zero current inductance drops by 10% (typ). Operating temperature -25ºC to +105ºC. For non-standard inductance values, please contact Profec. ETALDOC 835/2 Page 4 of 7 July 2005 P7605 3316 size Part Number Inductance (1) (µH) DCR (Ω) Max P7605-3316-1R0M P7605-3316-1R5M P7605-3316-2R2M P7605-3316-3R3M P7605-3316-4R7M P7605-3316-6R8M P7605-3316-100M P7605-3316-150M P7605-3316-220M P7605-3316-330M P7605-3316-470M P7605-3316-680M P7605-3316-101M P7605-3316-151M P7605-3316-221M P7605-3316-331M P7605-3316-471M P7605-3316-681M P7605-3316102M 1.0±20% 1.5±20% 2.2±20% 3.3±20% 4.7±20% 6.8±20% 10±20% 15±20% 22±20% 33±20% 47±20% 68±20% 100±20% 150±20% 220±20% 330±20% 470±20% 680±20% 1000±20% 0.009 0.010 0.012 0.015 0.018 0.027 0.038 0.046 0.085 0.10 0.14 0.20 0.28 0.40 0.61 1.02 1.27 2.02 3.00 SRF (MHz) 150 100 85 60 45 35 25 20 18 14 11 10 7.0 6.5 5.0 4.0 3.0 2.5 2.0 (2) Rated Current (3) IRMS (A) 6.8 6.4 6.1 5.4 4.8 4.4 3.9 3.1 2.7 2.1 1.8 1.5 1.3 1.0 0.8 0.6 0.5 0.4 0.3 (4) Isat (A) 9.0 8.0 7.0 6.4 5.4 4.6 3.8 3.0 2.6 2.0 1.6 1.4 1.2 1.0 0.8 0.6 0.5 0.4 0.3 Notes 1. 2. 3. 4. 5. 6. Inductance measured at 100kHz, 100mV. SRF (Self resonant Frequency) is typical and for reference only. Rated current is the current at which the temperature rise is 40ºC typical. Saturation Current, Isat, is the DC current at which the zero current inductance drops by 10% (typ). Operating temperature -25ºC to +105ºC For non-standard inductance values, please contact Profec. ETALDOC 835/2 Page 5 of 7 July 2005 P7605 3340 size Part Number Inductance (1) (µH) DCR (Ω) Max P7605-3340-100M P7605-3340-150M P7605-3340-220M P7605-3340-330M P7605-3340-470M P7605-3340-680M P7605-3340-101M P7605-3340-151M P7605-3340-221M P7605-3340-331M P7605-3340-471M P7605-3340-681M P7605-3340-102M 10±20% 15±20% 22±20% 33±20% 47±20% 68±20% 100±20% 150±20% 220±20% 330±20% 470±20% 681±20% 1000±20% 0.040 0.050 0.066 0.080 0.11 0.17 0.22 0.34 0.44 0.70 0.95 1.2 2.0 SRF (MHz) 23 14 8.5 7.0 6.5 4.5 4.0 3.0 2.5 2.3 2.0 1.5 1.3 (2) Rated Current (3) IRMS (A) 3.5 3.2 2.9 2.3 2.1 1.9 1.55 1.35 1.00 0.90 0.75 0.55 0.50 (4) Isat (A) 7.0 5.8 4.8 3.8 3.4 2.7 2.2 1.9 1.5 1.3 1.0 0.9 0.7 Notes 7. 8. 9. 10. 11. 12. Inductance measured at 100kHz, 100mV. SRF (Self resonant Frequency) is typical and for reference only. Rated current is the current at which the temperature rise is 40ºC typical. Saturation Current, Isat, is the DC current at which the zero current inductance drops by 10% (typ). Operating temperature -25ºC to +105ºC. For non-standard inductance values, please contact Profec. ETALDOC 835/2 Page 6 of 7 July 2005 P7605 5022 size Part Number Inductance (1) (µH) DCR (Ω) Max P7605-5022-1R0M P7605-5022-1R5M P7605-5022-2R2M P7605-5022-3R3M P7605-5022-5R6M P7605-5022-100M P7605-5022-150M P7605-5022-220M P7605-5022-330M P7605-5022-470M P7605-5022-680M P7605-5022-101M P7605-5022-151M P7605-5022-221M P7605-5022-331M P7605-5022-471M P7605-5022-681M P7605-5022-102M 1.0±20% 1.5±20% 2.2±20% 3.3±20% 5.6±20% 10±20% 15±20% 22±20% 33±20% 47±20% 68±20% 100±20% 150±20% 220±20% 330±20% 470±20% 680±20% 1000±20% 0.009 0.012 0.014 0.018 0.020 0.031 0.036 0.047 0.066 0.086 0.13 0.19 0.25 0.38 0.56 0.85 1.1 1.8 SRF (MHz) 140 110 75 70 45 21 16 13 11 9.0 6.5 5.7 4.5 3.7 3.0 2.7 2.2 2.0 (2) Rated Current (3) IRMS (A) 8.6 7.5 7.1 6.2 5.3 4.3 4.0 3.5 3.0 2.6 2.3 1.8 1.5 1.2 1.0 0.82 0.72 0.56 (4) Isat (A) 20 18 16 14 12 10 8.0 7.0 5.5 4.5 3.5 3.0 2.6 2.4 1.9 1.4 1.2 1.0 Notes 1. 2. 3. 4. 5. 6. Inductance measured at 100kHz, 100mV. SRF (Self resonant Frequency) is typical and for reference only. Rated current is the current at which the temperature rise is 40ºC typical. Saturation Current, Isat, is the DC current at which the zero current inductance drops by 10% (typ). Operating temperature -25ºC to +105ºC. For non-standard inductance values, please contact Profec. ORDERING CODE P7605- - ABSOLUTE MAXIMUM RATINGS MT Tape and Reel Storage temperature -40ºC to +125ºC Operating temperature -25ºC to+105ºC (+85ºC 1608 and 2012) Soldering temperature profile peak 260ºC 10s Tolerance (±20%) Inductance code Size : (1608, 2012, 3308, 3316, 3340 or 5022) Type code Handle in accordance with IPC/JEDEC J-STD-033 procedure for components classified as IPC/JEDEC J-STD-020 Moisture Sensitivity Level 2. ISO 9001 FM 25326 ETAL Group Oy, Kuormatie 14, FIN-03101, Nummela Telephone: +358 (0)20 7500 330 Fax: +358 (0)20 7500 333 Website: www.etalgroup.com Email: [email protected] ETALDOC 835/2 Page 7 of 7 July 2005