Series 4.69" x 1.50" [ 120x120x38 mm ] 125 AC Axial Fans 0.36 9.35 0.36 9.35 Approvals R GAM T1 listed Life expectancy L-10 LIFE AT 40°C: 50 000 hours (Sleeve bearings) 80 000 hours (Ball bearings) 0 10 20 30 40 50 Available with: Electrical protection: impedance protected Housing material: zamak Impeller material: plastic UL 94 VO Weight: 0,725 kg - flying leads - speed sensor 60 [CFM] 2,5 0 0,10 [mmH2O] [In.H2O] 125XL 2,0 50 Hz 60 Hz 20 40 60 80 [CFM] 0 6 125LG 5 50 Hz 60 Hz 4 0,06 0,02 0 5 10 15 20 25 80 [mmH2O] 0,20 100 50 Hz 60 Hz 8 0,15 0,4 0,3 6 0,2 4 0,05 1 0,00 30 [l/s] 120 [CFM] 125XR 10 2 0,0 60 0,10 0,04 0,5 40 [In.H2O] [In.H2O] 3 1,0 20 12 [mmH2O] 0,08 1,5 Static pressure AC Motor 0,1 2 0 0 5 10 15 20 25 30 35 40 0,00 45 [l/s] 0 0 10 20 30 40 50 0,0 60 [l/s] Airflow Part number Nominal Airflow Noise Nominal Frequency Phases Capacitor Input Nominal Starting voltage level speed power current current 125XL0282010 V 115 125XL0281010 208-240 125LG0282010 115 125LG0281010 208-240 125XR0282090 115 125XR2282090 115 125XR0281090 208-240 125XR2281090 208-240 l/s 25 27 25 27 35 40 35 40 44 53 44 51,5 44 53 44 51,5 dB(A) 30 32 30 32 38 40,5 38 40,5 44 48 43 47,5 44 48 43 47,5 RPM 1600 1750 1600 1750 2200 2500 2200 2500 2800 3200 2750 3250 2800 3200 2750 3250 Hz 50 60 50 60 50 60 50 60 50 60 50 60 50 60 50 60 µF 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 W 12 10 12 10 16 13 18 15 16 15 16 15 18 15 18 15 mA 135 115 75 65 200 160 110 90 200 180 200 180 125 105 125 105 mA 145 125 90 75 260 220 140 120 310 260 310 260 170 150 170 150 Bearing system Ball X X X X X X X X X X X X Sleeve Connection Operating type temperature Leads Terminals Min. °C Max. °C X X X X X X X X X X X X X X X X X X X X - 10 - 10 - 10 - 10 - 10 - 10 - 10 - 10 - 10 - 10 - 10 - 10 - 10 - 10 - 10 - 10 70 70 70 70 70 70 70 70 70 70 55 55 70 70 55 55 * 125LG & 125XL also available with sleeve bearings: P/N: 125LG2282010 (115V); 125LG2281090 (208-240V); 125XL2282030 (115V); 125XL2281030 (208-240V) - Metal filters: 96-152 and 96-302 Additional versions: Dual volatage 115V-230V Accessories: - Plastic filter P/N : F120/T102 and 120V - Plastic finger guards P/N : PFG-120 & 121-53 - Metal finger guard P/N : 9601-43 Shock & vibration protected - salt spray protected Wide temperature range - sleeve bearings - marine specifications - Speed nuts P/N : Speed nuts 6.32 - Metal mesh filter P/N : 120-G ETRI http://www.etrinet.com e-mail: [email protected] ETRI is a trade mark of ECOFIT, group Non contractual document. Specifications are subject to change without prior notice. Pictures for information only. Edition N°2/01-Rev.1