Series 3.15" x 1.5" [ 80x80x38 mm ] 126 AC Axial Fans Approvals R GAM T1 listed AC Motor Life expectancy Electrical protection: impedance protected Housing material: zamak Impeller material: plastic UL 94 VO Weight: 0,4 kg L-10 LIFE AT 40°C: 80 000 hours (ball bearings) 50 000 hours (sleeve bearings) 0 5 10 15 [CFM] 20 2,0 0 0,08 [In.H2O] 126LH [mmH2O] 5 10 15 [mmH2O] Static pressure 0,06 50 Hz 60 Hz 25 [CFM] 0 3 1,0 0,04 2 0,5 0,02 1 5 10 15 20 [CFM] 30 0,30 [mmH2O] 126LF [In.H2O] [In.H2O] 0,25 6,0 50 Hz 60 Hz 25 8,0 0,15 126LJ (208-240V) 1,5 20 4 50 Hz 60 Hz 0,10 0,20 4,0 0,15 0,10 0,05 2,0 0,05 0,0 0 2 4 6 8 0,00 10 [l/s] 0 0,00 0 2 4 6 8 10 12 0,0 [l/s] 0,0 4,0 8,0 12,0 0,00 16,0 [l/s] Airflow Part number Nominal Airflow Noise Nominal Frequency Phases Capacitor Input Nominal Starting voltage level speed power current current 126LH0182000 V 115 126LH0181000 208-240 126LJ0182000 115 126LJ0181000 208-240 126LF0182000 115 126LF0181000 208-240 l/s 6 7 6,5 8 9 11 9 11 12,5 15 12,5 15 dB(A) 10 11 14 18 22 25 22 25 30 35 30 35 RPM 1350 1550 1550 1850 2000 2400 2000 2400 2750 3250 2750 3250 Hz 50 60 50 60 50 60 50 60 50 60 50 60 Additional versions: Shock and vibration protected - wide temperature range Sleeve bearings ETRI http://www.etrinet.com µF 1 1 1 1 1 1 1 1 1 1 1 1 W 5 4 7 6 7 6 8 7 10 8 12 9 mA 50 50 35 30 75 65 45 40 130 100 75 60 mA 60 60 40 35 80 70 50 45 170 140 90 70 Accessories: - Plastic finger guards P/N : PFG-80 and 81-53 - Plastic filter P/N : F80/T102 e-mail: [email protected] Bearing system Ball X X X X X X X X X X X X Sleeve Connection Operating type temperature Leads Terminals Min. °C Max. °C X X X X X X X X X X X X - 10 - 10 - 10 - 10 - 10 - 10 - 10 - 10 - 10 - 10 - 10 - 10 70 70 70 70 70 70 70 70 70 70 70 70 - Rubber mounts P/N : AM-10 - Metal finger guard P/N : 12601-43 - Metal mesh filter P/N : 80-G ETRI is a trade mark of ECOFIT, group Non contractual document. Specifications are subject to change without prior notice. Pictures for information only. Edition N°2/01-Rev.1