LOW POWER CONSUMPTION OSCILLATORS LPO 14 SERIES, Model 4 14 pin Dual-in-Line Package OUTLINES AND DIMENSIONS DESCRIPTION The Euroquartz LPO14 series of low power consumption oscillators are ideal parts providing the time base signals for real-time clocks. The oscillators have very low current consumption (as low as 14mA) and are ideal for battery operated devices such as data logging and portable test equipment. FEATURES · · · · · Very low current consumption from 14mA Industry-standard 14 pin DIL package Wide frequency range, from 1Hz to 160kHz Supply Voltage from 2.0 Volts to 15.0 Volts Standard CMOS output (N/C on Model 4) SPECIFICATION Input Voltage: Frequency Range: +3.3 VDC +5.0VDC +3.0 Volts to +15.0 Volts is available 1Hz to 160kHz (Limited to standard frequencies.) CMOS Output Logic: Output Voltage CMOS HIGH’1’: 2.97V min. 4.5V min. CMOS LOW ‘0’: 0.33V max. 0.4V max. Calibration Tolerance: see table opposite Frequency Stability: see curve opposite Current Consumption: 26mA typical 45mA typical Rise/Fall Times: 0.5ms typical, 1ms maximum (Measured from 10%Vdd to 90%Vdd) Start-up Voltage: 1.90 VDC Duty Cycle: 50%±5% typical, 50%±10% maximum Start-up Time: 450ms maximum Storage Temperature: -50° to +100°C Ageing: ±5ppm maximum at 25°C FREQUENCY DEVIATION vs TEMPERATURE CURRENT CONSUMPTION vs SUPPLY VOLTAGE CALIBRATION TOLERANCE Euroquartz Part Number Suffix P A B C Cailbration Tolerance at 25°C ±10ppm ±25ppm ±50ppm ±100ppm PART NUMBER GENERATION LPO oscillators part numbers are derived as follows: EXAMPLE: 5LPO14-C4-32.768k kHz RANGE OSCILLATORS mA CURRENT CONSUMPTION If you require oscillators in the kHz frequency range with mA current consumption please see our standard CMOS oscillator range. STOCK HOLDING AND CUSTOM PARTS Euroquartz maintain a large stock of standard frequency and specification oscillators. If you require custom frequencies and/or specification oscillators, Euroquartz will manufacture in-house with short delivery Voltage Code ‘5’ = 5 Volts ‘3’ = 3 Volts (etc.) Package Code LPO14 = 14 pin DIL Calibration Tolerance P, A, B or C Model Code 4 or 7 Frequency k = kHz, H = Hz EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE Tel: +44 1460 230000 Fax: +44 1460 230001 email: [email protected] web: www.euroquartz.co.uk