Heavy Duty Vibration Meter Measures Acceleration, Velocity and Displacement plus a PC interface Stores the maximum and minimum values for later recall Features: • Ranges — Acceleration: 656ft/s2 (200m/s2), Velocity: 7.87in/s (200mm/s), Displacement: 0.078in (2mm) • Remote vibration sensor with magnetic adapter on 39"(1m) cable • Wide frequency range of 10Hz to 1kHz • Resolution to 2ft/s2 (0.5m/s2), 0.02in/s (0.5mm/s), and 0.001in (0.005)mm • Basic accuracy of ±(5% + 2 digits) • RMS or Peak Value measurement modes • Manual/Auto store/recall up to 500 readings • Optional Windows® 95/98/NT/2000/XP compatible software allows captured readings to be downloaded to your PC for further analysis • Data Hold freezes the reading in the display • Auto shut-off saves battery life • 9V battery power or optional AC adaptor • Dimensions: 7.1 x 2.8 x 1.3" (180 x 72 x 32mm); Weight with Probe: 0.87lbs (395g) • Complete with remote sensor, magnetic mount, 9V battery, protective rubber holster with stand, and hard carrying case Applications: • Motors, bearings • Fans • Pumps • Rotating machinery • Plant maintenance Ordering Information: 407860....................Heavy Duty Vibration Meter, Mounted pickup 407860-NIST ..........407860 with NIST Certificate 156119....................117V AC Adaptor 156221....................220V AC Adaptor 407001....................Data Acquisition software and cable 407001-USB............USB adaptor for 407001 www.extech.com Specifications subject to change without notice. 3/03/09 - R1 Copyright © 2007-2008 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.