C&K RBP12 Series 1-6 Pole Miniature Rotary Switches Features/Benefits • Rotary switch for low current • Shaft perpendicular to PCB • Index mechanism included in Typical Applications • Medical • Instrumentation • Appliances thickness of switch • Several actuation modes • Low profile Electrical Data Mechanical Data Max. number of banks Operating torque Stop strength End stop Contact material Insulating material 1 2.5 Ncm ± 25% (1 pole) > 40 Ncm With/without or mobile Silver, Gold Thermoplastic NOTE: For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. NOTE: Specifications and materials listed above are for switches with standard options. For informationon specific and custom switches, consult Customer Service Center. Gold (G) Silver (S) MBB-BBM MBB-BBM Make Before Break, Break Before Make 5 VA (resistive) 0.5 VA (resistive) Max. switching power Max. switching current 130 mA 20 mA Max. carrying current 3A 3A Contact resistance < 15 m ohms < 25 m ohms Dielectric strength between contacts 1000 V 1000 V at 50 Hz or contacts and ground 1000 V 1000 V Nominal voltage 150 V rms 150 V rms Number of operations 15 ,000 20 ,000 Insulation resistance between contacts > 5 x 109 ohms > 5 x 109 ohms and contacts and frame (500 Vcc) Switching mode Environmental data Storage temperature Salt spray Further data Solderability Cleaning Rotary L – 25°C to + 70°C NA – 25°C to + 85°C 48 H Hand: Wave: 350°C/5 s 260°C/5 s max. Cleaning of modules prohibited Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages L-19 thru L-21. For additional options not shown in catalog, consult Customer Service Center. Designation RBP12 Switch Function 112S SP, 30° Index, 12 pos. no stop 103B03 SP, 30° Index, 3 pos. Switching Mode 105B05 SP, 30° Index, 5 pos. N Non-shorting BBM (break-before-make) 107B07 SP, 30° Index, 7 pos. C Shorting, MBB (make-before-break) 108B08 SP, 30° Index, 8 pos. 110B10 SP, 30° Index, 10 pos. 112B12 SP, 30° Index, 12 pos. Actuator 206S DP, 30° Index, 6 pos. no stop F Screwdriver slot* 202B02 DP, 30° Index, 2 pos. AD Plastic shaft, <20mm (.787)* 203B03 DP, 30° Index, 3 pos. S Plastic shaft, 6mm (.236)* 205B05 DP, 30° Index, 5 pos. M Thumbwheel 304B04 3P, 30° Index, 4 pos. 403B03 4P, 30° Index, 3 pos. Option 602B02 6P, 30° Index, 2 pos. (NONE) P Lateral PCB adaptation Contact Material S Silver G Gold *Option: Metallic shaft available by request Dimensions are shown: Inch (mm) Specifications and dimensions subject to change L–18 www.ittcannon.com C&K RBP12 Series 1-6 Pole Miniature Rotary Switches DESIGNATION RBP12 SWITCH FUNCTION SP MODELS SCHEMATIC DP MODELS SCHEMATIC 30º INDEXING NO. POLES MODEL NO. SWITCH FUNCTION 112S 12 Position No Stops 103B03 3 Positions 105B05 5 Positions 107B07 7 Positions 108B08 8 Positions 110B10 10 Positions 112B12 12 Positions 206S 6 Positions No Stop 202B02 3 Positions 203B03 3 Positions 205B05 5 Positions 30º INDEXING NO. POLES MODEL NO. SWITCH FUNCTION 3P 4P 304B04 403B03 602B02 4 Positions 3 Positions 6P 2 Positions SP L Rotary DP 4P MODELS SCHEMATIC 3P MODELS SCHEMATIC 6P MODELS SCHEMATIC A B C D E F PC LAYOUTS Dimensions are shown: Inch (mm) Specifications and dimensions subject to change L–19 www.ittcannon.com C&K RBP12 Series 1-6 Pole Miniature Rotary Switches SWITCHING MODE N NON-SHORTING, BBM (break-before-make) C SHORTING, MBB (make-before-break) ACTUATOR F M AD SCREWDRIVER SLOT THUMBWHEEL PLASTIC SHAFT, <20 mm (.787) S PLASTIC SHAFT, 6 mm (.236) P LATERAL PCB ADAPTATION Rotary L OPTION (NONE) Dimensions are shown: Inch (mm) Specifications and dimensions subject to change L–20 www.ittcannon.com C&K RBP12 Series 1-6 Pole Miniature Rotary Switches CONTACT MATERIAL OPTION CODE RoHS COMPLIANT* RoHS COMPATIBLE* CONTACT AND TERMINAL MATERIAL RATING S YES YES SILVER LOW LEVEL/DRY CIRCUIT SWITCH: 130 mA, POWER: 5 VA MAXIMUM. CARRY: 3 AMPS G YES YES GOLD LOW LEVEL/DRY CIRCUIT OR POWER SWITCH: 20 mA, POWER: 0.5 VA MAXIMUM. CARRY: 3 AMPS * Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications. AVAILABLE HARDWARE AD + FA SHAFT F + FA SHAFT B L Rotary S + FA SHAFT C PART NUMBER “A” Y460P0067FP .394 (10,0) Y460P0060FP .590 (15,0) Y460P0090FP .787 (20,0) Y460320100P .984 (25,0) Y460P0018FP 1.969 (50,0) Y460P0022FP 2.756 (70,0) NOTE: FA metallic shaft, consult customer service for available lengths. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change L–21 www.ittcannon.com