S14 SERIES GENERAL PURPOSE LP FILTER STEEPNESS FACTOR 1.40 This range of 7-pole Elliptical Function Low Pass Filters is intended for bandwidth limitation with minimal distortion of the transmitted signal. The filters are corrected for Group Delay distortion over approx. 92% of the passband and for loss distortion over the entire passband. Degradation of a composite video signal is minimal when a 4.5 MHz or 5.5 MHz filter is selected for a 525 or 625 line T.V. system. The filters may be used for antialiasing in A-D and D-A systems. Order Code End of Passband MHz S14020G S14025G S14030G S14035G S14040G S14045G S14050G S14055G S14060G S14065G S14070G S14075G S14080G S14085G S14090G S14095G S14100G 2.00 2.50 3.00 3.50 4.00 4.50 5.00 5.50 6.00 6.50 7.00 7.50 8.00 8.50 9.00 9.50 10.00 Other data Start of Stopband MHz 2.80 3.50 4.20 4.90 5.60 6.30 7.00 7.70 8.40 9.10 9.80 10.50 11.20 11.90 12.60 13.20 14.00 Group Delay Ripple ns Delay Time ns 40 30 25 25 20 20 15 15 15 12 12 10 10 10 10 10 10 785 628 523 448 392 349 314 285 262 242 224 209 196 185 174 165 157 Impedance 75 ohms Stopband attenuation wrt 100 kHz > 40 dB Insertion Loss at 100 kHz < 1.3 dB Amplitude ripple in passband < 0.2 dB Video performance for filters of 5.5 MHz (4.5 MHz for 525 line) and above. Pulse and bar: K - rating < 0.5% Luminance/Chrominance Gain inequality (20T) < 3% Luminance/Chrominance Delay inequality (20T < 10 ns Aqueous Washable Yes Package DR00014A © Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice FARA164d Page 1 of 2 Dec-99(B) PACKAGE DETAIL Faraday Technology Ltd. Croft Road Industrial Estate, Newcastle, Staffordshire ST5 0QZ. England. FARA164d Tel: Fax: Email: Web site: Page 2 of 2 + 44 (0)1782 661501 + 44 (0)1782 630101 [email protected] http://www.faradaytech.co.uk Dec-99(B)