Finisar Pigtail Isolator Features: ● High reliability ● Low insertion Loss ● High Isolation ● Optimized for different wavelengths ● Wide operating temperature range Pigtail isolator is generally used in various lasers which require isolation to prevent feedback into laser. Finisar pigtail isolators offer excellent performance with low insertion loss, high isolation. Our proprietary bonding process, and years of volume manufacturing experience, results in a high reliability record. Bare isolator chips survive more than 5,000hrs of damp heat testing without delamination. Specifications: Parameters Units nm 1310 1550 Operating wavelength nm 1290-1330 1530-1570 Operating temperature Insertion loss (Isolator chip) Insertion loss (Connector) Isolation at center wavelength Maximum power rating Storage temperature Connector °C dB dB dB mW °C CWL Specification -40 to 85 < 0.4 < 0.2 >30 dB @ 23°C 4 -40 to 100 SC/APC *Note: Over all wavelengths and temperatures. Package Dimensions (unit:mm): Connector Ordering Information Part Number Description FIP-S-31-00-4 FIP-S-55-10-4 Pigtail isolator, 1310nm, single stage, SC/APC connector Pigtail isolator, 1550nm, single stage, SC/APC connector Finisar Shanghai Inc. No. 66 Huiqing Rd., East Zhangjiang Hi-Tech Park, Shanghai, China 201201 Main: +86-21-38559200 Fax: +86-21-68919894 Website: www.finisar.com Finisar Corporation 1308 Moffett Park Drive, Sunnyvale, CA 94089-1133, USA Main: (408) 548-1000 Fax: (408)543-0083 Email: [email protected] Website: www.finisar.com Feb. 09 Rev.A