FREQUENCYDEVICES 858L8E-6

858 Series
0.1 Hz to 102.4 kHz
8-Bit Programmable
2" x 4"
8-Pole Filters
Description
The 858 Series are digitally programmable low pass
and high-pass active filters that are tunable over a
256:1 frequency range. 858 filters are available
with any one of six standard factory-set tuning
ranges up to 102.4 kHz. These units contain 8
CMOS logic inputs that can be operated in a
transparent or latching mode.
All 858 Series models are convenient, low profile,
easy to use fully finished filters which require no
external components or adjustments. They feature
low harmonic distortion, and near theoretical phase
and amplitude characteristics. 858 filters operate
from non-critical ± 12 to ± 18 Vdc power supplies,
have a 10 kW (min.) input impedance, a 10 W (max.)
output impedance and offer dc voltage offset
adjustment.
Features/Benefits:
• Lower cost, high precision replacement for 848
and 878 series products.
• Low harmonic distortion and wide signal-to-noise
ratio to 16 bit resolution.
• Digitally programmable corner frequency allows
selecting cut-off frequencies specific to each
application.
• Plug-in ready-to-use, reducing engineering
design and manufacturing cycle time.
• Factory-set tuning range, no external clocks or
adjustments needed.
• Broad range of transfer characteristics and corner
frequencies to meet a wide range of applications.
Applications
• Anti-alias filtering
•
•
•
•
•
•
•
•
Data acquisition systems
Communication systems and electronics
Medical electronics equipment and research
Aerospace, navigation and sonar applications
Sound and vibration testing
Real and compressed time data analysis
Noise elimination
Signal reconstruction
Programmable Specifications: . . . . . . . . . . . . . Page
Digital Tuning & Control. . . . . . . . . . . . . . . . . . . . . . 2
Available Low-Pass Models: . . . . . . . . . . . . . . . . . . .
858L8B 8-pole Butterworth . . . . . . . . . . . . . . . . . 3
858L8E 8-pole, 6 zero elliptic, 1.77 (-80dB) . . . . . 3
858L8EX 8-pole, 6 zero elliptic, 1.56 (-80dB) . . . . . 3
858L8EY 8-pole, 6 zero elliptic, 2.00 (-100dB) . . . . 3
858L8L 8-pole Bessel . . . . . . . . . . . . . . . . . . . . . 4
858L8D60 8-pole constant delay (-60dB). . . . . . . . . 4
858L8D80 8-pole constant delay (-80dB). . . . . . . . . 4
858L8D10 8-pole constant delay (-100dB) . . . . . . . . 4
Available High-Pass Models: . . . . . . . . . . . . . . . . . .
858H8B 8-pole Butterworth . . . . . . . . . . . . . . . . . . 5
858H8E 8-pole, 6 zero elliptic, 1.77 (-80dB) . . . . . 5
858H8EX 8-pole, 6 zero elliptic, 1.56 (-80dB) . . . . . 5
858H8EY 8-pole, 6 zero elliptic, 2.00 (-100dB) . . . . 5
General Specifications:
Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . 6
Pin-out/package data . . . . . . . . . . . . . . . . . . . . . . . . 6
1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176
e-mail: [email protected] • Web Address: http://www.freqdev.com
858 Series
Digital Tuning &
Control Characteristics
8-Bit Programmable Filters
Digital Tuning Characteristics
Pin-Out Key
The digital tuning interface circuits are two 4042 quad CMOS
latches which accept the following CMOS-compatible inputs:
eight tuning bits (D0 - D7), a latch strobe bit (C), and a transition
polarity bit (P).
IN
OUT
GND
“P”
“C”
+Vs
-Vs
Os
Filter tuning follows the tuning equation given below:
7
6
5
4
fc = ( fmax/256 ) [ 1 + D7 x 2 + D6 x 2 + D5 x 2 + D4 x 2 + D3 x
3
2
1
0
2 + D2 x 2 + D1 x 2 + D0 x 2 ]
where D1 - D7 = "0" or "1", and
fmax = Maximum tuning frequency;
fc = corner frequency;
Minimum tunable frequency = fmax/256 (D0 thru D7 = 0);
Minimum frequency step (Resolution) = fmax/256
Analog Input Signal
Analog Output Signal
Power and Signal Return
Transition Polarity Bit
Tuning Strobe Bit
Supply Voltage, Positive
Supply Voltage, Negative
Offset Adjustment
D7 Tuning
D6 Tuning
D5 Tuning
D4 Tuning
D3 Tuning
D2 Tuning
D1 Tuning
D0 Tuning
Bit
Bit
Bit
Bit
Bit
Bit
Bit
Bit
7 (MSB)
6
5
4
3
2
1
0 (LSB)
OUT +Vs -Vs
D7
D6
D5
D4
GND
Data Input Specifications
Data Control Lines
Functions
D2
D1
Latch Strobe (C)
Transition Polarity (P)
Data Control Modes
Mode 1
P = 0; C = 0
P = 0; C = 0›
Mode 2
D3
P = 1; C = 1
P = 1; C = 1fl
D0
IN Os
frequency latched on rising edge
frequency follows input codes
frequency latched on falling edge
MSB
Input Data Levels
P C
Bottom View
frequency follows input codes
7
(CMOS Logic)
Input Voltage (Vs = 15 Vdc)
Low Level In
0 Vdc min.
High Level In
11 Vdc min.
4 Vdc max.
15 Vdc max.
Input Current
High Level In
Low Level In
- 10 mA typ.
-5
+10 mA typ.
-1 mA max..
+1 mA max.
Input Capacitance
5 pF typ
7.5 pF max.
Input Data Format
Frequency Select Bits
Positive Logic
Logic "1" = +Vs
Logic "0" = Gnd
Bit Weighting
D0
D7
(Binary-Coded)
LSB (least significant bit)
MSB (most significant bit)
Frequency Range
256 : 1, Binary Weighted
-5
Notes:
1. Frequency data must be present before occurrence of strobe edge.
2. Frequency data must be present after occurrence of strobe edge.
--6
--5
--4
--3
--2
--1
LSB
Bit
Weight
0
2
2
2
2
2
2
2
2
D7
D6
D5
D4
D3
D2
D1
D0
0
0
0
0
0
0
0
0
fmax/256
0
0
0
0
0
0
0
1
fmax/128
0
0
0
0
0
0
1
1
fmax/64
0
0
0
0
0
1
1
1
fmax/32
0
0
0
0
1
1
1
1
fmax/16
0
0
0
1
1
1
1
1
fmax/8
0
0
1
1
1
1
1
1
fmax/4
0
1
1
1
1
1
1
1
fmax/2
1
1
1
1
1
1
1
1
fmax
fc
Corner
Frequency
2
1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176
e-mail: [email protected] • Web Address: http://www.freqdev.com
858 Series
8-Pole
Low-Pass Filters
8-Bit Programmable
Model
858L8B
858L8E
858L8EX
858L8EY
Transfer Function
8-Pole
Butterworth
8-Pole, 6 zero
Elliptic
8-Pole, 6 zero
Elliptic
8-Pole, 6 zero
Elliptic
Size, Model 2
Model 3 thru 6
4.0” x 2.0” x 0.6”
4.0” x 2.0” x 0.4”
4.0” x 2.0” x 0.6”
4.0” x 2.0” x 0.4”
4.0” x 2.0” x 0.6”
4.0” x 2.0” x 0.4”
4.0” x 2.0” x 0.6”
4.0” x 2.0” x 0.4”
Range fc, fr
0.1 Hz to 102.4 kHz
0.1 Hz to 102.4 kHz
0.1 Hz to 102.4 kHz
0.1 Hz to 102.4 kHz
Theoretical Transfer
Characteristics
Appendix A
Page 9
Appendix A
Page 24
Appendix A
Page 23
Appendix A
Page 25
Passband Ripple
0.0 dB
± 0.035 dB
0.05 dB
0.05 dB
0 ± 0.1 dB max.
0 ± 0.05 dB typ.
0 ± 0.1 dB max.
0 ± 0.05 dB typ.
0 ± 0.1 dB max.
0 ± 0.05 dB typ.
0 ± 0.1 dB max.
0 ± 0.05 dB typ.
Stopband
Attenuation Rate
48 dB/octave
80 dB min.
80 dB min.
100 dB min.
Cutoff Frequency
Stability
Amplitude
Phase
fc
± 0.01% /°c
- 3 dB
-360°
Filter Attenuation
0.12 dB
3.01 dB
60.0 dB
80.0 dB
Product Specifications
(theoretical)
DC Voltage Gain
(non-inverting)
(theoretical)
Phase Match1
± 2% max.
0.80 fc
1.00 fc
2.37 fc
3.16 fc
± 2% max.
0.035 dB
3.01 dB
60.0 dB
80.0 dB
1.00 fr
1.13 fr
1.67 fr
1.77 fr
0.5 dB
3.01 dB
60.0 dB
80.0 dB
± 2% max.
1.00 fr
1.05 fr
1.45 fr
1.56 fr
± 2% max.
0.5 dB
3.01 dB
80.0 dB
100.0 dB
0.8 fr - 1.0 fr
0 - 0.8 fc
± 0.2 dB max.
± 0.1 dB typ.
0.8 fc - 1.0 fc ± 0.3 dB max.
± 0.15 dB typ.
0 - 0.8 fr
± .2 dB max.
± .1 dB typ.
0.8 fr - 1.0 fr ± .3 dB max.
± .15 dB typ.
0 - 0.8 fr
± 0.2 dB max.
± 0.1 dB typ.
0.8 fr - 1.0 fr ± 0.5 dB max.
± 0.25 dB typ.
0 - 0.8 fr
Total Harmonic
Distortion @ 1 kHz
< - 100 dB typ.
< - 88 dB typ.
< - 88 dB typ.
< - 88 dB typ.
Wide Band Noise
200 mVrms typ.
200 mVrms typ.
250 mVrms typ.
250 mVrms typ.
50 mVrms typ.
50 mVrms typ.
75 mVrms typ.
75 mVrms typ.
FMA-03A
FMA-03A
FMA-03A
FMA-03A
Narrow Band Noise
(5 Hz - 100 kHz)
Filter Mounting
Assembly
0 - 0.8 fr
1.00 fr
1.06 fr
1.83 fr
2.00 fr
± 3° max.
± 1.5° typ.
0.8 fr - 1.0 fr ± 4° max.
± 2° typ.
(5 Hz - 2 MHz)
0 - 0.8 fr
fr
± 0.01% /°c
- 0.05 dB
-419°
± 2° max.
± 1° typ.
0.8 fr - 1.0 fr ± 4° max.
± 2° typ.
(theoretical)
0 - 0.8 fr
fr
± 0.01% /°c
- 0.05 dB
-414°
± 2° max.
± 1° typ.
0.8 fc - 1.0 fc ± 3° max.
± 1.5° typ.
Amplitude Accuracy
0 - 0.8 fc
fr
± 0.01% /°c
- 0.035 dB
-323.5°
0.8 fr - 1.0 fr
± 3° max.
± 1.5° typ.
± 4° max.
± 2° typ.
± 0.2 dB max.
± 0.1 dB typ.
± 0.5 dB max.
± 0.25 dB typ.
1.Unit to unit match for the same transfer function, set to the same frequency and operating configuration, and from the same manufacturing lot.
3
1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176
e-mail: [email protected] • Web Address: http://www.freqdev.com
858 Series
8-Pole
Low-Pass Filters
8-Bit Programmable
Model
858L8L
858L8D60
858L8D80
858L8D10
Transfer Function
8-Pole
Bessel
8-Pole, 6 zero
Constant Delay
8-Pole, 6 zero
Constant Delay
8-Pole, 6 zero
Constant Delay
Size, Model 2
Model 3 thru 6
4.0” x 2.0” x 0.6”
4.0” x 2.0” x 0.4”
4.0” x 2.0” x 0.6”
4.0” x 2.0” x 0.4”
4.0” x 2.0” x 0.6”
4.0” x 2.0” x 0.4”
4.0” x 2.0” x 0.6”
4.0” x 2.0” x 0.4”
Range fc
0.1 Hz to 102.4 kHz
0.1 Hz to 102.4 kHz
0.1 Hz to 102.4 kHz
0.1 Hz to 102.4 kHz
Theoretical Transfer
Characteristics
Appendix A
Page 4
Appendix A
Page 20
Appendix A
Page 21
Appendix A
Page 22
Passband Ripple
0.0 dB
0.15 dB
0.15 dB
0.15 dB
0 ± 0.1 dB max.
0 ± 0.05 dB typ.
0 ± 0.1 dB max.
0 ± 0.05 dB typ.
0 ± 0.1 dB max.
0 ± 0.05 dB typ.
0 ± 0.1 dB max.
0 ± 0.05 dB typ.
Stopband
Attenuation Rate
48 dB/octave
60 dB min.
80 dB min.
100 dB min.
Cutoff Frequency
Stability
Amplitude
Phase
fc
± 0.01% /°c
- 3 dB
-182°
Filter Attenuation
1.91 dB
3.01 dB
60.0 dB
80.0 dB
Product Specifications
(theoretical)
DC Voltage Gain
(non-inverting)
(theoretical)
± 2% max.
0.80 fc
1.00 fc
4.52 fc
6.07 fc
fc
± 0.01% /°c
- 3 dB
-306°
3.01 dB
40.0 dB
60.0 dB
Phase Match1
0 - fc
± 2° max.
± 1° typ.
0 - fc
Amplitude Accuracy
0 - fc
± 0.2 dB max.
± 0.1 dB typ.
0 - 0.8 fc
(theoretical)
± 2% max.
1.00 fc
2.28 fc
2.64 fc
± 2° max.
± 1° typ.
fc
± 0.01% /°c
- 3 dB
-306°
± 2% max.
3.01 dB
60.0 dB
80.0 dB
0 - fc
1.00 fc
3.08 fc
3.57 fc
± 2° max.
± 1° typ.
fc
± 0.01% /°c
- 3 dB
-311°
± 2% max.
3.01 dB
80.0 dB
100.0 dB
1.00 fc
4.45 fc
5.20 fc
0 - fc
± 2° max.
± 1° typ.
± 0.2 dB max.
± 0.1 dB typ.
± 0.3 dB max.
± 0.15 dB typ.
± 0.2 dB max.
± 0.1 dB typ.
0.8 fc - 1.0 fc ± 0.3 dB max.
± 0.15 dB typ.
0 - 0.8 fc
± 0.2 dB max.
± 0.1 dB typ.
0.8 fc - 1.0 fc ± 0.3 dB max.
± 0.15 dB typ.
0 - 0.8 fc
0.8 fc - 1.0 fc
Total Harmonic
Distortion @ 1 kHz
< - 100 dB typ.
< - 100 dB typ.
< - 100 dB typ.
< - 100 dB typ.
Wide Band Noise
200 mVrms typ.
200 mVrms typ.
200 mVrms typ.
200 mVrms typ.
50 mVrms typ.
50 mVrms typ.
50 mVrms typ.
50 mVrms typ.
FMA-03A
FMA-03A
FMA-03A
FMA-03A
(5 Hz - 2 MHz)
Narrow Band Noise
(5 Hz - 100 kHz)
Filter Mounting
Assembly
1.Unit to unit match for the same transfer function, set to the same frequency and operating configuration, and from the same manufacturing lot.
4
1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176
e-mail: [email protected] • Web Address: http://www.freqdev.com
858 Series
8-Pole
High-Pass Filters
8-Bit Programmable
Model
858H8B
858H8E
858H8EX
858H8EY
Transfer Function
8-Pole
Butterworth
8-Pole, 6 zero
Elliptic
8-Pole, 6 zero
Elliptic
8-Pole, 6 zero
Elliptic
Size, Model 2
Model 3 thru 6
4.0” x 2.0” x 0.6”
4.0” x 2.0” x 0.4”
4.0” x 2.0” x 0.6”
4.0” x 2.0” x 0.4”
4.0” x 2.0” x 0.6”
4.0” x 2.0” x 0.4”
4.0” x 2.0” x 0.6”
4.0” x 2.0” x 0.4”
Range fc, fr
0.1 Hz to 102.4 kHz
0.1 Hz to 102.4 kHz
0.1 Hz to 102.4 kHz
0.1 Hz to 102.4 kHz
Theoretical Transfer
Characteristics
Appendix A
Page 29
Appendix A
Page 37
Appendix A
Page 36
Appendix A
Page 38
Passband Ripple
0.0 dB
± 0.035 dB
- 0.05 dB
- 0.05 dB
0 ± 0.2 dB to 100 kHz
0 ± 0.5 dB to 120 kHz
0 ± 0.2 dB to 100 kHz
0 ± 0.5 dB to 120 kHz
0 ± 0.2 dB to 100 kHz
0 ± 0.5 dB to 120 kHz
0 ± 0.2 dB to 100 kHz
0 ± 0.5 dB to 120 kHz
Power Bandwidth
120 kHz
120 kHz
120 kHz
120 kHz
Small Signal
Bandwidth
(-6 dB) 1 MHz
(-6 dB) 1 MHz
(-6 dB) 1 MHz
(-6 dB) 1 MHz
Stopband
Attenuation Rate
48 dB/octave
80 dB
80 dB
100 dB
Cutoff Frequency
Stability
Amplitude
Phase
fc
± 0.01% /°c
- 3 dB
-360°
Filter Attenuation
80 dB
60.0 dB
3.01 dB
0.00 dB
Product Specifications
(theoretical)
Voltage Gain
(non-inverting)
(theoretical)
± 2% max.
0.31 fc
0.42 fc
1.00 fc
2.00 fc
Phase Match1
fc - 100 kHz ± 3° max.
± 1.5° typ.
Amplitude Accuracy
fc-1.25 fc
(theoretical)
fr
± 0.01% /°c
- 0.035 dB
-323.5°
± 2% max.
80 dB
60.0 dB
3.01 dB
0.03 dB
0.00 dB
0.56 fr
0.60 fr
0.88 fr
1.00 fr
2.00 fr
fr - 1.25 fr
± 4° max.
± 2° typ.
1.25 fr-100 kHz ± 2° max.
± 1° typ.
± 0.30 dB max. fr-1.25 fr
± 0.15 dB typ.
1.25 fc-100kHz± 0.20 dB max. 1.25 fr-100 kHz
± 0.10 dB typ.
fr
± 0.01% /°c
- 0.05 dB
-414°
± 2% max.
80 dB
60.0 dB
3.01 dB
0.03 dB
0.00 dB
0.64 fr
0.69 fr
0.95 fr
1.00 fr
2.00 fr
fr - 1.25 fr
± 4° max.
± 2° typ.
1.25 fr-100 kHz± 2° max.
± 1° typ.
fr
± 0.01% /°c
- 0.05 dB
-419°
100 dB
80.0 dB
3.01 dB
0.03 dB
0.00 dB
± 4° max.
± 2° typ.
1.25 fr-100 kHz ± 3° max.
± 1.5° typ.
± 0.3 dB max. fr-1.25 fr
± 0.15 dB typ.
± 0.2 dB max. 1.25 fr-100 kHz
± 0.1 dB typ.
± 0.5 dB max. fr-1.25 fr
± 0.25 dB typ.
± 0.2 dB max. 1.25 fr-100 kHz
± 0.1 dB typ.
< - 100 dB typ.
< - 88 dB typ.
< - 88 dB typ.
< - 88 dB typ.
Wide Band Noise
400 mVrms typ.
400 mVrms typ.
500 mVrms typ.
500 mVrms typ.
100 mVrms typ.
100 mVrms typ.
150 mVrms typ.
150 mVrms typ.
FMA-03A
FMA-03A
Narrow Band Noise
(5 Hz - 100 kHz)
Filter Mounting
Assembly
FMA-03A
FMA-03A
0.50 fr
0.55 fr
0.94 fr
1.00 fr
2.00 fr
fr - 1.25 fr
Total Harmonic
Distortion @ 1 kHz
(5 Hz - 2 MHz)
± 2% max.
± 0.5 dB max.
± 0.25 dB typ.
± 0.2 dB max.
± 0.1 dB typ.
1.Unit to unit match for the same transfer function, set to the same frequency and operating configuration, and from the same manufacturing lot.
5
1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176
e-mail: [email protected] • Web Address: http://www.freqdev.com
858 Series
Pin-Out and Package Data
Ordering Information
Specification
(25°C and Vs ± 15 Vdc)
Analog Input Characteristics1
Impedance
Voltage Range
Max. Safe Voltage
Analog Output Characteristics
Impedance (Closed Loop)
Linear Operating Range
2
Maximum Current
3
Offset Voltage
Offset Temp. Coeff.
Power Supply (±Vs)
Rated Voltage
Operating Range
Maximum Safe Voltage
Quiescent Current
8 Pole
10 k W min.
± 10 Vpeak
±Vs
11 W typ.
10 W max.
±10V
±2 mA
22 mV typ.
20 mV max.
50 mV/°C
Pin-Out & Package Data
4.00
M-2
0.6
M-1
0.4
0.2 min
0.04 Dia.
Side View
All dimensions are in inches
All Case Dimensions ± 0.01"
Grid Dimensions 0.1" x 0.1"
OUT +Vs -Vs
D7
D6
±15 Vdc
±12 to ±18 Vdc
±18 Vdc
D5
D4
GND
2.00
D3
D2
±25 mA typ.
±40 mA max.
Temperature
Operating
Storage
D1
D0
4
IN Os
-20 to +70°C
-25 to +85°C
Bottom View
P C
Filter Mounting Assembly-See FMA-03A
Notes:
1. Input and output signal voltage referenced to supply common.
Ordering Information
2. Output is short circuit protected to common.
DO NOT CONNECT TO ±Vs.
3. Adjustable to zero.
4. Units operate with or without offset pin connected.
Filter Type
Transfer Function
L - Low Pass
H - High Pass
B - Butterworth
L - Bessel
D60 - constant delay (-60 dB)
D80 - constant delay (-80 dB)
D10 - constant delay (-100 dB)
E - elliptic 1.77 (-80 dB)
EX - elliptic 1.56 (-80 dB)
EY - elliptic 2.00 (-100 dB)
DC Offset Adjustment
+ Vs
858L8B-3
Do not connect
if trim is not
required.
20 k W
(Cermet)
OS
Model Number
e.g., Model
Number
1
2
3
4
5
6
- Vs
Tuning
Range (Hz)
0.1 to 25.6
1.0 to 256
10 to 2560
100 to 25.6k
200 to 51.2k
400 to 102.4k
Minimum
Step(Hz)
0.1
1.0
10
100
200
400
Case
M-2
M-2
M-1
M-1
M-1
M-1
We hope the information given here will be helpful. The information is based on data and our best knowledge, and we consider the information to be true and accurate. Please read all statements,
recommendations or suggestions herein in conjunction with our conditions of sale which apply to all goods supplied by us. We assume no responsibility for the use of these statements,
recommendations or suggestions, nor do we intend them as a recommendation for any use which would infringe any patent or copyright.
IN-00858-00
6
1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176
e-mail: [email protected] • Web Address: http://www.freqdev.com
Product Handling
Procedure
Programmable Filter Modules Power Sequence & ESD
November 2000
Programmable Filters Modules
818, 824, 828, 828BP, 828BR, 854, 858, R854, R858
I. Scope
The following precautions are necessary when handling and installing Frequency Devices
programmable filter modules.
II. Digital Circuit Description
The digital input pins connect directly to 4000 series CMOS logic, such as the 4053 analog switch. The
power supply (Vss) for the digital logic on the module comes directly from the +15 Volt pin on the
module. This sets the threshold voltage at 11.0 V minimum to 15.0 V maximum for a "1" (High) level
and 0.0 V minimum to 4.0 V maximum for a "0" (Low) level. Applying a voltage between 4.0 and 11.0
V will produce unpredictable operation. Connecting 5 Volt or 3.3 V logic devices directly to the filter
module without using a voltage translator will result in erratic operation of the filter.
III. (VERY IMPORTANT) Power-Up and Power-Down Sequence
Do not plug-in or un-plug module while power is applied. It is imperative that power is
supplied to the + 15 V pin on the filter module before or at the same instance that any digital pin is
pulled High (> 0.0 V). Failure to do this will result in excessive current flowing through the digital input
pin and through a protection diode internal to the 4000 logic, which will result in damage to the module.
The proper power-up and power-down sequence is:
1. Connect filter module ground.
2. Connect filter module +15 V.
3. Connect filter module -15 V.
4. Connect the input signal.
All four of the above steps can also occur simultaneously. Power-down should occur in the reverse
order.
IV. ESD Issues
Like most modern electronic equipment, the modules can be damaged by electrostatic discharge (ESD).
The modules are shipped from the factory in sealed, anti-static packaging and should be kept in the
sealed package prior to mounting on a circuit board. The following additional rules should also be
observed when handling the modules after they are removed from the factory packaging:
1. Only a person wearing a properly grounded wrist strap should handle the modules.
2. Any work surface that the modules are placed on must be properly ESD grounded.
3. Any insulating materials capable of generating static charge (such as paper) should be kept
away from the modules.
Static generating clothing should be covered with an ESD-protective smock.
1
1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176
e-mail: [email protected] • Web Address: http://www.freqdev.com
8-Pole
Bessel
Appendix A
Low-Pass
Theoretical Transfer Characteristics
1
f/fc
Amp
Phase
Delay
(Hz)
(dB)
(deg)
(sec)
0.00
0.00
0.00
.506
0.10
-0.029
-18.2
.506
0.20
-0.117
-36.4
.506
0.30
-0.264
-54.7
.506
0.40
-0.470
-72.9
.506
0.50
-0.737
-91.1
.506
0.60
-1.06
-109
.506
0.70
-1.45
-128
.506
0.80
-1.91
-146
.506
0.85
-2.16
-155
.506
0.90
-2.42
-164
.506
0.95
-2.71
-173
.506
1.00
-3.01
-182
.506
-3.67
1.10
-200
.506
-4.40
1.20
-219
.506
-5.20
1.30
-237
.506
1.40
-6.10
-255
.505
1.50
-7.08
-273
.504
1.60
-8.16
-291
.502
1.70
-9.36
-309
.498
1.80
-10.7
-327
.492
1.90
-12.1
-345
.482
2.00
-13.7
-362
.468
2.25
-18.1
-402
.417
2.50
-23.1
-436
.352
2.75
-28.3
-465
.291
3.00
-33.4
-489
.241
3.25
-38.3
-509
.201
3.50
-43.1
-526
.170
4.00
-51.8
-552
.126
5.00
-66.8
-587
.077
6.00
-79.2
-610
.052
7.00
-89.8
-626
.038
8.00
-99.0
-638
.029
9.00
-107
-647
.023
10.0
-114
-655
.018
Frequency Response
Amp (dB)
0
-40
-60
-80
-100
0.1
2
3 4 5 6 78
1.0 2 3 4 5 6 7 10.0
Normalized Frequency(f/fc)
Delay (Normalized)
Delay (sec)
1.0
0.5
0.0
0.1
0.15 2
3
4
5 6 7 89
1.0
1.5
Normalized Time (1/f sec)
Step Response (V/V)
Step Response
1.Normalized Group Delay:
The above delay data is normalized to a corner frequency
of 1.0Hz.The actual delay is the normalized delay divided
by the actual corner frequency (fc).
Actual Delay =
-20
Normalized Delay
1.2
1.0
0.8
0.6
0.4
0.2
-0.0
-0.2
0
1
2
3
4
Normalized Time (1/f sec)
Actual Corner Frequency (fc) in Hz
4
1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176
e-mail: [email protected] Web Address: http://www.freqdev.com
5
Low-Pass
8-Pole
Appendix A
Butterworth
Theoretical Transfer Characteristics
1
f/fc
Amp
Phase
Delay
(Hz)
(dB)
(deg)
(sec)
0.00
0.00
0.00
.816
0.10
0.00
-29.4
.819
0.20
0.00
-59.0
.828
0.30
0.00
-89.1
.843
0.40
0.00
-120
.867
0.50
0.00
-152
.903
0.60
-0.001
-185
.956
0.70
-0.014
-221
1.04
0.80
-0.121
-261
1.19
0.85
-0.311
-283
1.29
0.90
-0.738
-307
1.40
0.95
-1.58
-333
1.48
1.00
-3.01
-360
1.46
1.10
-7.48
-408
1.17
1.20
-12.9
-445
.873
1.30
-18.2
-472
.672
1.40
-494
.540
-23.4
1.50
-511
.448
-28.2
1.60
-526
.380
-32.7
1.70
-539
.328
-36.9
1.80
-550
.287
-40.8
1.90
-44.6
-560
.253
2.00
-48.2
-568
.226
2.25
-56.3
-586
.174
2.50
-63.7
-600
.139
2.75
-70.3
-611
.113
3.00
-76.3
-621
.094
3.25
-81.9
-629
.080
3.50
-87.1
-635
.069
4.00
-96.3
-646
.052
5.00
-112
-661
.033
6.00
-125
-671
.023
7.00
-135
-678
.017
8.00
-144
-683
.013
9.00
-153
-687
.010
10.0
-160
-691
.008
Frequency Response
Amp (dB)
0
-60
-100
0.1
Delay (sec)
2.0
2
3 4 5 6 78 1.0
2
3 4 5 67
Normalized Frequency(f/fc)
10.0
Delay (Normalized)
1.0
0.0
0.1
0.15 2
3
4
5 6 7 8 9 1.0 1.5
Normalized Time (1/f sec)
Step Response (V/V)
Step Response
1.2
1.0
0.8
0.6
0.4
0.2
-0.0
0
Normalized Delay
Actual Corner Frequency (fc) in Hz
-40
-80
1.Normalized Group Delay:
The above delay data is normalized to a corner frequency
of 1.0Hz.The actual delay is the normalized delay divided
by the actual corner frequency (fc).
Actual Delay =
-20
9
1
2
3
4
Normalized Time (1/f sec)
1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176
e-mail: [email protected] Web Address: http://www.freqdev.com
5
8-Pole, 6-Zero
Constant Delay
Appendix A
Low-Pass (60 dB)
Theoretical Transfer Characteristics
1
f/fc
Amp
Phase
Delay
(Hz)
(dB)
(deg)
(sec)
0.00
0.00
0.00
.776
0.005
-28.0
0.10
.776
0.012
-55.9
0.20
.776
0.005
-83.9
0.30
.776
-0.042
-112
0.40
.776
-0.161
-140
.776
0.50
-0.384
-168
.776
0.60
-0.745
-196
.776
0.70
-1.28
-224
.776
0.80
-1.62
-238
.776
0.85
-252
-2.02
.776
0.90
-265
-2.48
.775
0.95
-279
-3.01
.773
1.00
-307
-4.29
.766
1.10
-334
-5.91
.749
1.20
-10.3
-386
.675
1.40
-15.9
-431
.558
1.60
-22.4
-467
.443
1.80
-29.4
-495
.351
2.00
-39.0
-523
.268
2.25
2.50
-50.5
-544
.212
2.75
-78.0
-561
.171
3.00
-63.7
-395
.142
3.25
-63.5
-407
.119
3.50
-66.9
-417
.102
3.75
-425
.088
-74.7
4.00
-253
.077
-85.0
4.25
-259
.068
-72.0
4.50
-265
.060
-67.9
4.75
-270
.054
-65.8
5.00
-64.6
-275
.048
5.25
-63.9
-279
.044
5.50
-63.5
-283
.040
5.75
-63.3
-286
.036
6.00
-63.2
-289
.033
6.50
-63.3
-295
.028
7.00
-63.7
-299
.024
8.00
-64.7
-307
.019
9.00
-66.0
-313
.015
10.0
-67.3
-318
.012
Frequency Response
0
Amp (dB)
-20
-60
-80
-100
0.1
2
3 4 5 6 78
1.0 2 3 4 5 6 7 10.0
Normalized Frequency(f/fc)
Delay (Normalized)
Delay (sec)
1.0
0.5
0.0
0.1
0.15 2
3
4
5 6 7 89
1.0 1.5
Normalized Time (1/f sec)
Step Response (V/V)
Step Response
1.Normalized Group Delay:
The above delay data is normalized to a corner frequency
of 1.0Hz.The actual delay is the normalized delay divided
by the actual corner frequency (fc).
Actual Delay =
-40
Normalized Delay
1.2
1.0
0.8
0.6
0.4
0.2
-0.0
-0.2
0
1
2
3
4
Normalized Time (1/f sec)
Actual Corner Frequency (fc) in Hz
20
1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176
e-mail: [email protected] Web Address: http://www.freqdev.com
5
8-Pole, 6-Zero
Constant Delay
Appendix A
Low-Pass (80 dB)
Theoretical Transfer Characteristics
1
f/fc
Amp
Phase
Delay
(Hz)
(dB)
(deg)
(sec)
0.00
0.00
.852
0.00
0.017
-30.7
.852
0.10
0.058
-61.3
.852
0.20
0.099
-92.0
.852
0.30
0.105
-123
.852
0.40
0.034
-153
.852
0.50
-0.157
-184
.852
0.60
-0.510
-215
.852
0.70
-1.07
-245
.851
0.80
-1.44
-261
.850
0.85
-1.89
-276
.849
0.90
-2.41
-291
.846
0.95
-3.01
-306
.841
1.00
-4.50
-336
.821
1.10
-6.39
-365
.783
1.20
-11.3
-417
.656
1.40
-17.1
-459
.512
1.60
-23.2
-492
.396
1.80
-29.1
-517
.312
2.00
-36.3
-542
.239
2.25
2.50
-43.4
-561
.189
2.75
-50.3
-576
.153
3.00
-57.6
-589
.127
3.25
-62.5
-599
.107
3.50
-75.4
-608
.092
3.75
-98.3
-616
.079
4.00
-86.3
-442
.069
4.25
-84.1
-448
.061
4.50
-85.1
-454
.054
4.75
-87.9
-458
.049
5.00
-92.8
-462
.044
5.25
-104
-466
.040
5.50
-101
-289
.036
5.75
-93.3
-293
.033
6.00
-89.9
-295
.030
-86.6
-300
.026
6.50
-85.1
-305
.022
7.00
-84.1
-312
.017
8.00
-84.3
-317
.013
9.00
-84.9
-321
.011
10.0
Frequency Response
Amp (dB)
0
-40
-60
-80
-100
0.1
2
3 4 5 6 78
1.0 2 3 4 5 6 7 10.0
Normalized Frequency(f/fc)
Delay (Normalized)
Delay (sec)
1.0
0.5
0.0
0.1
0.15 2
3
4
5 6 7 89
1.0 1.5
Normalized Time (1/f sec)
Step Response (V/V)
Step Response
1.Normalized Group Delay:
The above delay data is normalized to a corner frequency
of 1.0Hz.The actual delay is the normalized delay divided
by the actual corner frequency (fc).
Actual Delay =
-20
Normalized Delay
1.2
1.0
0.8
0.6
0.4
0.2
-0.0
-0.2
0
1
2
3
4
Normalized Time (1/f sec)
Actual Corner Frequency (fc) in Hz
21
1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176
e-mail: [email protected] Web Address: http://www.freqdev.com
5
8-Pole, 6-Zero
Constant Delay
Appendix A
Low-Pass (100 dB)
Theoretical Transfer Characteristics
1
f/fc
Amp
Phase
Delay
(Hz)
(dB)
(deg)
(sec)
0.00
0.00
0.00
.865
0.10
0.015
-31.1
.865
.865
0.20
0.051
-62.3
.865
0.30
0.085
-93.4
.865
0.40
0.085
-125
0.50
0.010
-156
.865
0.60
-0.182
-187
.865
0.70
-0.532
-218
.865
0.80
-1.09
-249
.864
0.85
-1.45
-265
.863
0.90
-1.89
-280
.861
0.95
-2.41
-296
.857
1.00
-3.01
-311
.851
1.10
-4.50
-341
.828
1.20
-6.38
-370
.785
1.40
-11.2
-422
.650
1.60
-16.8
-464
.504
1.80
-22.5
-496
.389
2.00
-28.0
-520
.306
2.25
-34.5
-544
.235
2.50
-40.5
-563
.186
2.75
-46.1
-578
.151
3.00
-51.4
-591
.125
3.50
-61.5
-610
.090
4.00
-71.2
-624
.068
4.50
-81.3
-635
.054
5.00
-93.4
-643
.043
5.50
-142
-651
.036
6.00
-105
-476
.030
6.20
-105
-478
.028
6.50
-106
-481
.025
7.00
-110
-486
.022
8.00
-122
-312
.017
9.00
-109
-318
.013
10.0
-106
-322
.011
12.0
-105
-328
.007
14.0
-106
-333
.005
16.0
-107
-336
.004
18.0
-108
-339
.003
20.0
-109
-341
.003
Frequency Response
0
Amp (dB)
-20
-60
-80
-100
-120
0.1
2
3 4 5 678
2
3 4 5 67
1.0
10.0
Normalized Frequency(f/fc)
Delay (Normalized)
Delay (sec)
1.0
0.5
0.0
0.1
0.15 2
3
4
5 6 7 89
1.0 1.5
Normalized Time (1/f sec)
Step Response (V/V)
Step Response
1.Normalized Group Delay:
The above delay data is normalized to a corner frequency
of 1.0Hz.The actual delay is the normalized delay divided
by the actual corner frequency (fc).
Actual Delay =
-40
Normalized Delay
1.2
1.0
0.8
0.6
0.4
0.2
-0.0
-0.2
0
1
2
3
4
Normalized Time (1/f sec)
Actual Corner Frequency (fc) in Hz
22
1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176
e-mail: [email protected] Web Address: http://www.freqdev.com
5
8-Pole, 6-Zero
Elliptic, 1.56
Appendix A
Low-Pass
Theoretical Transfer Characteristics
1
f/fc
Amp
Phase
Delay
(Hz)
(dB)
(deg)
(sec)
0.00
0.00
0.00
0.823
0.10
-0.001
-29.7
0.829
0.20
-0.013
-59.8
0.844
0.30
-0.040
-90.5
0.865
0.40
-0.049
-122
0.904
-0.018
-156
0.972
0.50
-0.003
-174
1.016
0.55
-0.002
-192
1.064
0.60
-0.019
-212
1.116
0.65
-0.042
-233
1.178
0.70
-255
0.75
-0.049
1.264
-279
0.80
-0.026
1.388
-305
0.85
-0.001
1.557
-335
0.90
-0.024
1.767
-369
0.95
-0.045
2.111
1.00
-0.050
-414
3.062
1.10
-10.48
-531
2.043
1.20
-25.96
-576
0.814
1.30
-39.45
-598
0.493
1.40
-52.87
-614
0.348
-69.11
-624
0.265
1.50
-89.09
-453
0.211
1.60
-85.32
-459
0.174
1.70
-89.95
-463
0.156
1.75
-103.5
-465
0.147
1.80
1.85
-95.94
-288
0.158
1.90
-89.31
-290
0.126
1.95
-86.44
-292
0.117
2.00
-84.96
-295
0.110
2.20
-84.54
-302
0.087
2.40
-88.65
-307
0.069
2.60
-99.78
-311
0.057
2.80
-99.97
-135
0.048
3.00
-90.20
-139
0.041
3.50
-85.09
-145
0.029
4.00
-84.04
-150
0.022
5.00
-84.76
-156
0.014
6.00
-86.45
-160
0.009
7.00
-88.31
-163
0.007
8.00
-90.11
-165
0.005
9.00
-91.82
-167
0.004
10.0
-93.41
-168
0.003
Frequency Response
Amp (dB)
0
-20
-40
-60
-80
-100
0.1
2
3 4 5 6 78
2
3 4 5 67
1.0
10.0
Normalized Frequency(f/fc)
Delay (Normalized)
Delay (sec)
4.0
2.0
0.8
0.0
0.1
0.15 2
3
4
5 6 7 89
1.0 1.5
Normalized Time (1/f sec)
Step Response (V/V)
Step Response
1.Normalized Group Delay:
The above delay data is normalized to a corner frequency
of 1.0Hz.The actual delay is the normalized delay divided
by the actual corner frequency (fc).
Normalized Delay
Actual Delay =
Actual Corner Frequency (fc) in Hz
1.2
1.0
0.8
0.6
0.4
0.2
-0.0
0
23
1
2
3
4
Normalized Time (1/f sec)
1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176
e-mail: [email protected] Web Address: http://www.freqdev.com
5
8-Pole, 6-Zero
Elliptic, 1.77
Appendix A
Low-Pass
Theoretical Transfer Characteristics
1
f/fc
Amp
Phase
Delay
(Hz)
(dB)
(deg)
(sec)
0.00
0.00
0.00
0.713
0.10
-0.004
-25.7
0.716
0.20
-0.014
-51.6
0.724
0.30
-0.024
-77.9
0.740
0.40
-0.020
-105
0.767
0.50
0.007
-133
0.811
0.55
0.022
-148
0.840
0.60
0.033
-163
0.872
0.65
0.031
-179
0.908
0.70
0.014
-196
0.946
0.75
-0.015
-213
0.989
0.80
-0.041
-232
1.04
0.85
-0.046
-251
1.12
0.90
-0.016
-272
1.23
0.95
-0.025
-296
1.40
1.00
-0.035
-323
1.65
1.10
-1.76
-392
2.14
1.20
-8.28
-467
1.86
1.30
-18.4
-522
1.19
1.40
-29.3
-558
0.753
1.50
-40.1
-578
0.517
1.60
-51.5
-594
0.381
1.70
-65.2
-606
0.296
1.75
-75.0
-611
0.265
1.80
-113.0
-616
0.239
1.85
-83.6
-440
0.217
1.90
-82.0
-444
0.198
1.95
-83.7
-447
0.182
2.00
-87.8
-450
0.168
2.20
-85.8
-280
0.126
2.40
-82.0
-289
0.099
2.60
-83.5
-295
0.081
2.80
-88.2
-301
0.067
3.00
-99.9
-305
0.057
3.50
-87.2
-134
0.040
4.00
-83.1
-140
0.030
5.00
-82.1
-148
0.018
6.00
-83.1
-154
0.013
7.00
-84.6
-157
0.009
8.00
-86.2
-160
0.007
9.00
-87.8
-163
0.005
10.0
-89.3
-164
0.004
Frequency Response
Amp (dB)
0
-20
-40
-60
-80
-100
0.1
2
3 4 5 6 78
1.0 2 3 4 5 6 7 10.0
Normalized Frequency(f/fc)
Delay (Normalized)
Delay (sec)
4.0
2.0
0.8
0.0
0.1
0.15 2
3
4
5 6 7 89
1.0 1.5
Normalized Time (1/f sec)
Step Response (V/V)
Step Response
1.Normalized Group Delay:
The above delay data is normalized to a corner frequency
of 1.0Hz.The actual delay is the normalized delay divided
by the actual corner frequency (fc).
Normalized Delay
Actual Delay =
Actual Corner Frequency (fc) in Hz
1.2
1.0
0.8
0.6
0.4
0.2
-0.0
0
24
1
2
3
4
Normalized Time (1/f sec)
1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176
e-mail: [email protected] Web Address: http://www.freqdev.com
5
8-Pole, 6-Zero
Elliptic, 2.00
Appendix A
Low-Pass
Theoretical Transfer Characteristics
1
f/fc
Amp
Phase
Delay
(Hz)
(dB)
(deg)
(sec)
0.00
0.00
0.00
0.885
0.10
-0.001
-31.9
0.891
0.20
-0.015
-64.2
0.903
0.30
-0.040
-97.0
0.922
0.40
-0.042
-131
0.958
0.50
-0.001
-166
1.020
0.55
0.000
-185
1.057
0.60
-0.007
-204
1.099
0.65
-0.027
-225
1.140
0.70
-0.045
-245
1.193
0.75
-0.040
-268
1.269
0.80
-0.014
-291
1.377
0.85
-0.001
-317
1.513
0.90
-0.031
-346
1.677
0.95
-0.036
-378
1.960
1.00
-0.046
-419
2.681
1.10
-7.910
-525
2.127
1.20
-21.06
-573
0.856
1.30
-31.96
-597
0.509
1.40
-41.51
-612
0.357
1.50
-50.35
-623
0.271
1.60
-58.90
-632
0.216
1.70
-67.54
-639
0.177
1.75
-72.04
-642
0.162
1.80
-76.79
-645
0.149
1.85
-81.93
-647
0.138
1.90
-87.78
-650
0.128
1.95
-95.04
-652
0.119
2.00
-106.6
-654
0.111
2.20
-106.0
-481
0.087
2.40
-121.3
-307
0.070
2.60
-106.5
-311
0.058
2.80
-105.0
-315
0.049
3.00
-106.4
-318
0.042
3.50
-123.6
-325
0.030
4.00
-111.5
-149
0.022
5.00
-105.4
-156
0.014
6.00
-105.1
-160
0.010
7.00
-106.0
-163
0.007
8.00
-107.3
-165
0.005
9.00
-108.6
-167
0.004
10.0
-110.0
-168
0.003
Frequency Response
0
Amp (dB)
-20
-40
-60
-80
-100
-120
0.1
2
3 4 5 6 78
1.0 2 3 4 5 6 7 10.0
Normalized Frequency(f/fc)
Delay (Normalized)
Delay (sec)
4.0
2.0
0.8
0.0
0.1
0.15 2
3
4
5 6 7 89
1.0 1.5
Normalized Time (1/f sec)
Step Response (V/V)
Step Response
1.Normalized Group Delay:
The above delay data is normalized to a corner frequency
of 1.0Hz.The actual delay is the normalized delay divided
by the actual corner frequency (fc).
Normalized Delay
Actual Delay =
Actual Corner Frequency (fc) in Hz
1.2
1.0
0.8
0.6
0.4
0.2
-0.0
0
25
1
2
3
4
Normalized Time (1/f sec)
1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176
e-mail: [email protected] Web Address: http://www.freqdev.com
5
High-Pass
8-Pole
Appendix A
Butterworth
Theoretical Transfer Characteristics
1
f/fc
Amp
Phase
Delay
(Hz)
(dB)
(deg)
(sec)
0.10
-160
691
0.819
0.20
-112
661
0.828
0.30
-83.7
631
0.843
0.40
-63.7
600
0.867
0.50
-48.2
568
0.903
0.60
-35.5
535
.956
499
0.70
-24.8
1.04
459
0.80
-15.6
1.19
437
0.85
-11.6
1.29
413
0.90
-8.06
1.40
0.95
-5.15
386
1.48
360
1.00
-3.01
1.46
275
1.20
-0.229
0.873
226
1.40
-0.020
0.540
-0.002
194
1.60
0.380
170
1.80
0.00
0.287
152
0.00
2.00
0.226
0.139
120
0.00
2.50
0.00
99.2
0.094
3.00
0.052
0.00
74.0
4.00
5.00
0.00
59.0
0.033
49.0
0.023
6.00
0.00
0.00
42.1
0.017
7.00
0.00
36.8
0.013
8.00
0.00
32.7
0.010
9.00
10.0
0.00
29.4
0.008
Frequency Response
Amp (dB)
0
-20
-40
-60
-80
-100
0.1
2
3 4 5 6 78
1.0 2 3 4 5 6 7 10.0
Normalized Frequency(f/fc)
1.Normalized Group Delay:
The above delay data is normalized to a corner frequency
of 1.0Hz.The actual delay is the normalized delay divided
by the actual corner frequency (fc).
Actual Delay =
Normalized Delay
Actual Corner Frequency (fc) in Hz
29
1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176
e-mail: [email protected] Web Address: http://www.freqdev.com
8-Pole, 6-Zero
Elliptic, 1.56
Appendix A
High-Pass
Theoretical Transfer Characteristics
1
f/fc
Amp
Phase
Delay
(Hz)
(dB)
(deg)
(sec)
0.10
-93.4
168
0.334
-84.8
0.20
156
0.344
143
-86.0
0.30
0.363
0.392
310
-92.6
0.40
0.439
295
-85.0
0.50
-114
287
0.472
0.55
-84.1
458
0.515
0.60
-57.0
617
0.652
0.70
-32.8
589
0.962
0.80
-22.6
569
1.325
0.85
0.90
-12.3
538
2.198
3.993
0.95
-3.08
483
3.062
1.00
-0.05
414
1.498
1.10
-0.03
341
-0.01
1.039
1.20
296
264
1.30
-0.04
0.773
239
1.40
-0.05
0.612
1.50
219
-0.03
0.505
1.60
202
-0.01
0.426
188
1.70
0.00
0.364
1.80
0.00
176
0.315
-0.01
165
1.90
0.275
2.00
156
-0.02
0.243
2.50
122
-0.05
0.145
0.097
3.00
101
-0.05
4.00
-0.03
75.1
0.053
-0.01
0.034
5.00
59.8
-0.01
0.023
6.00
49.7
7.00
0.017
0.00
42.5
8.00
0.013
0.00
37.2
9.00
0.00
33.0
0.010
10.0
0.00
29.7
0.008
Frequency Response
Amp (dB)
0
-20
-40
-60
-80
-100
0.1
2
3 4 5 6 78
1.0 2 3 4 5 6 7 10.0
Normalized Frequency(f/fc)
1.Normalized Group Delay:
The above delay data is normalized to a corner frequency
of 1.0Hz.The actual delay is the normalized delay divided
by the actual corner frequency (fc).
Normalized Delay
Actual Delay =
Actual Corner Frequency (fc) in Hz
36
1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176
e-mail: [email protected] Web Address: http://www.freqdev.com
8-Pole, 6-Zero
Elliptic, 1.77
Appendix A
High-Pass
Theoretical Transfer Characteristics
1
f/fc
Amp
Phase
Delay
(Hz)
(dB)
(deg)
(sec)
0.10
-89.3
164
0.440
0.20
-82.1
148
0.459
0.30
-90.6
131
0.495
292
0.40
-82.4
0.559
-87.8
450
0.50
0.671
0.55
-90.0
0.761
437
-60.2
0.60
0.890
603
-32.4
0.70
1.37
563
-13.1
0.80
2.35
498
-6.28
0.85
2.77
451
0.90
-2.21
401
2.66
358
0.95
-0.51
2.15
324
1.00
-0.03
1.64
277
1.10
-0.01
1.04
225
1.20
-0.05
0.757
1.30
-0.03
221
0.596
1.40
0.01
201
0.486
1.50
0.03
185
0.409
1.60
0.03
172
0.347
1.70
0.03
160
0.299
1.80
0.02
150
0.260
1.90
0.01
141
0.229
2.00
0.01
133
0.203
2.50
-0.02
105
0.123
3.00
-0.02
86.9
0.083
4.00
-0.02
64.7
0.046
5.00
-0.01
51.6
0.029
6.00
-0.01
42.9
0.020
-0.01
0.015
7.00
36.8
-0.01
0.011
8.00
32.1
9.00
-0.01
28.6
0.009
10.0
0.00
25.7
0.007
Frequency Response
Amp (dB)
0
-20
-40
-60
-80
-100
0.1
2
3 4 5 6 78 1.0
2
3 4 5 67
Normalized Frequency(f/fc)
1.Normalized Group Delay:
The above delay data is normalized to a corner frequency
of 1.0Hz.The actual delay is the normalized delay divided
by the actual corner frequency (fc).
Normalized Delay
Actual Delay =
Actual Corner Frequency (fc) in Hz
37
1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176
e-mail: [email protected] Web Address: http://www.freqdev.com
10.0
8-Pole, 6-Zero
Elliptic, 2.00
Appendix A
High-Pass
Theoretical Transfer Characteristics
1
f/fc
Amp
Phase
Delay
(Hz)
(dB)
(deg)
(sec)
0.10
-110
168
0.338
-105
0.20
156
0.348
-114
0.30
323
0.367
309
-110
0.40
0.397
654
-107
0.50
0.445
0.55
-78.6
646
0.480
0.524
0.60
-64.6
637
0.669
0.70
-44.1
615
1.001
0.80
-26.7
586
1.401
0.85
-18.2
565
0.90
-9.46
533
2.315
0.95
-2.16
478
3.604
1.00
-0.046
419
2.681
1.416
1.10
-0.038
352
1.018
1.20
-0.001
308
1.30
-0.032
277
0.773
1.40
-0.046
252
0.618
1.50
-0.034
231
0.514
1.60
-0.016
214
0.436
1.70
-0.004
200
0.376
1.80
0.000
187
0.328
1.90
-0.003
176
0.288
2.00
166
-0.010
0.255
131
2.50
-0.042
0.153
108
3.00
-0.045
0.103
4.00
-0.028
80.6
0.057
64.2
5.00
-0.015
0.036
53.4
6.00
-0.008
0.025
45.7
7.00
-0.005
0.018
40.0
8.00
-0.003
0.014
9.00
-0.002
35.5
0.011
31.9
10.0
-0.001
0.009
Frequency Response
0
Amp (dB)
-20
-40
-60
-80
-100
-120
0.1
2
3 4 5 6 78
1.0 2 3 4 5 6 7 10.0
Normalized Frequency(f/fc)
1.Normalized Group Delay:
The above delay data is normalized to a corner frequency
of 1.0Hz.The actual delay is the normalized delay divided
by the actual corner frequency (fc).
Normalized Delay
Actual Delay =
Actual Corner Frequency (fc) in Hz
38
1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176
e-mail: [email protected] Web Address: http://www.freqdev.com