Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: [email protected] Web: http://www.frontierusa.com CCFL Inverter Transformer—SDH2010-02 A. Electrical specification: Part No. Mark Suitable Frequency Max. Open Voltage Max. Lamp Watt. Efficiency SDH2010-02 SDH2010-02 40KHz~200KHz 1800 V rms. 9W 78% B. Schematics and Mechanical dimensions: (Unit: mm) 28.4 Max. 7 8 1 11 20.6 Max. 6 8 N2 7 MARKING: “SDH2010-02” “FEC XXXX” (TOP VIEW ) 8.5 Max. 5 4 N1 0.6 ± 0.15 3 N3 2.5 ± 0.2 4.0 ± 0.2 N4 (BOTTOM VIEW) 2 1 Turn Ratio: N1 : N2 : N3 : N4 = 3 : 1 : 3 : 533 C. Electrical Data: Winding Start Finish L (@ 100KHz,1.0V DCR Ω (@25°C) N1 N2 N3 N4 3 5 2 1 4 6 7 8 7.8 uH ± 15 % 1.0 uH Ref. 8.0 uH ± 15 % 155 mH ± 15 % 0.070 Max. 0.070 Max. 0.070 Max. 570 Max. D. Insulation: Term Hi-Pot Isolation Item Spec. Primary to Secondary Coils to Core Coil to coil 500 VAC / 1 Minute 1000 VAC / 1 Minute 100 MOHM Min. E. Features: • • • • Condition @Cut off current=5mA @ 500 VDC F. Uses: Low profile height: Maximum 8.50mm. High efficiency. Surface mount. Suitable for standard IR re-flows soldering. • Car navigators with high luminance. • Large LCD Panel. • Large liquid crystal TVS. Note: RoHS compliant; for the ROHS parts, we add “-LFR” at the end of the P/N. CCFL Inverter Transformer: P/N SDH2010-02 Rev. A. Jan. 01, 2006. Page: 1 of 1