600 Series SmartView™ Graphical Monitoring Software and Interface Hardware System Description Gamewell-FCI’s SmartView™ system includes workstation software — a Microsoft® Windows® 2000-based graphical user interface. SmartView®’s software is designed to be easy to configure and simple to operate. SmartView® presents information through a graphical menu system and dynamic color display while operating over a high-speed Ethernet LAN/WAN or single-user network. Similar to a website, the menu pages feature user-defined “hot spots” that either launch a task-specific application or direct users to another menu page. The system utilizes custom fire alarm icons to display point-specific alarm information. Each alarm event is displayed on a color-coded alarm display, or with its floor plan pinpointing the exact location of the alarm. Point-specific user instructions can also be displayed. All events and user actions are logged for creating user-selected customized reports. To enhance user accessibility, event information can also be broadcast to pagers or emailed via an optional Internet connection. SmartView™ can monitor an individual IdentiFlex 600 Series addressable fire alarm panel, or an entire SmartNet™/SmartLink™ network. The SmartView™ system supports up to three SmartView™ workstations as standard; for systems that require four or more workstations, please consult the factory. Included with each unit of SmartView™ software is a net communications central processing unit with 8 MB DRAM, 4 MB flash, a math coprocessor, communication ports, Gamewell-FCI 600 Series fire alarm panel interface, and power supply. g2150scl.jpg SmartView™ is a dynamic, feature-rich, graphical fire alarm monitoring software and interface hardware system for the Gamewell-FCI IdentiFlex 600 Series of addressable fire alarm control panels. Features SmartView • Fire alarm monitoring software operating on Windows® 2000/XP Professional operating system software. • Compatible with all Gamewell-FCI IdentiFlex 600 Series fire alarm panels. • Ethernet TCP/IP net controller. • High-speed networking. • Power supply with UPS battery backup. • SQL database. • Supports up to three workstations standard with P/N SV-MWS. • SmartLink™ peer-to-peer compatible. • Fully supervised. • NetController features flash memory for easy on-line software updates. • Optional Internet connection. • Paging and email compatible. • Easy configuration. • Familiar interface similar to Windows® Explorer. • Event logs with modifiable “listviews” for customized reports. • Select event-specific icons. • Color-coded alarm bar and Customize graphics. • Display multiple floor plans and user instructions. • Multiple workstation support. Microsoft® Windows® is a registered trademark of Microsoft® Corporation. SmartView™, SmartNet™ and SmartLink™ are trademarks of Honeywell International Inc. GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use. ©2007 Honeywell International Inc. All rights reserved. www.gamewell-fci.com CS-2150 Rev. A page 1 of 2 Specifications Ordering Information Net communications and power supply: Operating +32°F to +120°F (0°C to +49°C). Temperature: Relative Humidity: 10% to 95% non-condensing. Input Voltage: 100-240 VAC, 50/60 Hz Power Consumption: 10 watts. Overload Protection: 3.0A resettable fuse TVS protection. Battery Backup/UPS: UPS circuit with built-in trickle charger included. Provides four (4) hours of backup time with two (2), 12-volt, 7.0 AH batteries (not included). Model Description SV-SWS Single workstation system, including operating software, SV-NC, SV-PS, and enclosure. Multiple workstation system including up to three workstations, including operating software, SV-NC, SV-PS, and enclosure. Workstation software required for each additional workstation PC. Net communications unit with Gamewell-FCI driver (fiber). Net communications unit with Gamewell-FCI driver. Power supply. PC hardware requirements: PC with 750 MHz (or higher) processor, 256 MB (minimum) RAM, 10 GB (minimum) hard drive. CD-RW drive. 10/100 baseT Ethernet card. 19" (48.26 cm) diagonal (minimum) monitor screen, display set to 1024 x 768. Operating system: Microsoft® Windows® 2000/XP Professional. SV-MWS SV-MWOS SV-NC-F SV-NC SV-PS GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 www.gamewell-fci.com CS-2150 Rev. A page 2 of 2