Green Power Solutions srl Via Greto di Cornigliano 6R - 16152 Genova , Italy Phone: +39-010-659 1869 Fax: +39-010-659 1870 Web: www.gpsemi.it E-mail: [email protected] GCSS5580 STATIC SWITCH FOR POWER FACTOR IMPROVEMENT APPLICATIONS IP 20 construction Compact design High reliability Soft switching High working frequency LINE VOLTAGE UP TO 525V LOAD POWER UP TO 50kvar The GCSS5580 is an anti-parallel-SCR-based static switch especially designed for power factor improvement applications. Its main features are the soft turn-on which allows the insertion of the capacitor bank without voltage or current transients and the capability to work at high frequency allowing a better control on the power factor. The design is extremely compact an light weight. MAXIMUM RATINGS Characteristic QMAX Maximum load power IMAX Maximum load current VINS Insulation voltage PL Power losses Conditions f=50Hz; 400 VAC Line Value 50 kvar 76 ARMS 1 min @ 25°C 2500 VDC 150 W CONTROL CHARACTERISTICS VC IC Control voltage 5-24 VDC Control current 2 mA SUPPLY CHARACTERISTICS VSC VFS Control circuit supply Fan supply 24 VDC - 10 mA 230 VDC - 90 mA MECHANICAL AND THERMAL CHARACTERISTICS W Width 125 mm D Depth 134 mm H Height 195 mm M Ta max Mass Max amb. op. Temp. 3 kg 45 °C Tstg Storage temperature 60 °C Document GCSS5580 T002 STATIC SWITCH FOR POWER FACTORIMPROVEMENT APPLICATIONS GCSS5580 113 155 122 75 All dimensions are in mm In the interest of product improvement Green Power Solutions reserves the right to change any specification given in this data sheet without notice. Document GCSS5580 T002