SSF6AG THRU SSF6JG ULTRAFAST EFFICIENT GLASS PASSIVATED RECTIFIER VOLTAGE: 50 TO 600V CURRENT: 6.0A FEATURE DO-201AD Low power loss High surge capability Ultra-fast recovery time for high efficiency Glass passivated chip junction High temperature soldering guaranteed 250°C/10sec/0.375”lead length at 5 lbs tension MECHANICAL DATA Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Case: Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: color band denotes cathode Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL SSF6AG SSF6BG SSF6DG SSF6GG SSF6JG units Maximum Recurrent Peak Reverse Voltage Vrrm 50 100 200 400 600 V Maximum RMS Voltage Vrms 35 70 140 280 420 V Maximum DC blocking Voltage Vdc 50 100 200 400 600 V Maximum Average Forward Rectified Current 3/8”lead length at Ta =55°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at Forward current 6A Peak Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =125°C If(av) 6.0 A Ifsm 150 A Maximum Reverse Recovery Time (Note 1) Typical Thermal Resistance Typical Junction Capacitance (Note 2) Storage and Operating Junction Temperature Vf 0.975 1.30 1.70 V Ir 5.0 100.0 µA Trr 35 nS Rth(ja) Rth(jl) 40 5.0 °C/W Cj Tstg,Tj 100 50 -55 to +150 pF °C Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES SSF6AG THRU SSF6JG Rev.A1 www.gulfsemi.com