® assuredcommunications ® RF-5051-PS001 RF-5054-PS001 AC POWER SUPPLIES fully compatible and functional members of the FALCON® Series RF-5000 and FALCON® II RF-5800H tactical Communications families The RF5051PS001and RF5054PS001 Series of high performance AC power supplies allows operation of Fallon® II/Falcon®III and RF5000 Series systems from a VAC input range of 85 to 265 volts in base station, shipboard, or transportable applications. The RF5051PS001 Power Supply provides 28 volts DC at 30 Amps to power up to 840 watts. The power supply uses the same mounting as the RF5022R/T(E) Receiver/Exciter and is compatible with RF5000 and RF5800H family shock mounts and transport packages. RF5051PS001 environment specifications match those ® of the FALCON family components, providing a system which is reliable even under the harshest of conditions. The RF5054PS001 Power Supply consists of two RF5051PS001 units connected in parallel. The RF5054PS001 provides power for 400 watt Falcon Series systems. The RF5051PS001has backward compatible functionality to the RF5051PS125, and both RF5051PS001 and RF5051PS125 may be combined to create an RF5054PS001. Specifications for the RF-5051-PS001 and RF-5054-PS001 General/Electrical Mechanical/Environmental Input Voltage 85265 VAC, 47400 Hz Cooling Conduction to outside heat sink, forced convection Input Power Factor Correction >95% (85265 VAC) Temperature Operating: – 40˚Cto +70˚C; Storage: – 60˚C to +90˚C Input Protection Circuit Breaker Altitude MILSTD810F Output Voltage +28 VDC + _ 0.5 Humidity MILSTD810F, 95% Regulation, Line Load 0.2% from low line to high line Shock/Vibration MILSTD810F Ripple and Noise 200 MV @ 30A EMI MILSTD461E Voltage Stability 200 MV drift maximum Size RF5051PS001: 5.5H x 7.5W x 12.8D in (14H x 19.1W x 32.5D cm) RF5054PS001: 5.5H x 15.0W x 12.8D in (14H x 38.1W x 32.5D cm) Efficiency >80% OverVoltage Protection Set to 28 + _ 0.5 VAC Output Current RF5051PS001: 30 Amps maximum RF5054PS001: 60 Amps maximum Inrush Current RF5051PS001: 4 Amps for 10 ms RF5054PS001: 8 Amps for 10 ms Hold Time RF5051PS001: 500 ms with 0.5 Amp load RF5054PS001: 1 sec. with 0.5 Amp load Overload Protection RF5051PS001: Out. current limit 33 Amps RF5054PS001: Out. current limit 66 Amps Output Protection Output is automatically protected from short and misfirting Weight RF5051PS001: 17.3 lb (7.8 kg) RF5054PS001: 34.6 lb (15.7 kg) Features/Benefits High reliability Configurations for 50, 125 and 400 watt systems Conservative ratings Rugged package compatible with the FALCON® Series RF5000 and FALCON® II RF5800H Tactical Transceiver Systems Ground Fault Interrupters CISPR221EN55022 Level B Allows Generator Operation Supports Line/Line Operation Self Fault Recovery Fault Indicator Specifications are subject to change without notice. ® RF Communications Division | 1680 University Avenue | Rochester, NY USA 14610 www.harris.com 5852445830 assuredcommunications ® Copyright © 2007 Harris Corporation 05/07 DS-223C