HITRON HES10-20004-J-G

H HiTRON
AC/DC EXTERNAL WALLMOUNT & DESKTOP ADAPTER
UNIVERSAL OR USA INPUT SINGLE & DUAL OUTPUT 10-12 WATTS
SWITCHING POWER SUPPLIES HES10 & HES10B SERIES
FEATURES:
UNIVERSAL INPUT
WALLMOUNT OR DESKTOP ADAPTER
DIVERSE AC PLUG AVAILABLE
MEET UNIVERSAL SAFETY STANDARDS
EMI MEET EN55022/FCC CLASS B
CE MARKING COMPLIANCE
SPECIFICATION
INPUT SPECIFICATION
OUTPUT SPECIFICATION
Input Voltage For HES10 Series: 90-264Vac typical.
Input Voltage For HES10B Series: 90-132Vac typical.
Input Connector for HES10 Series:
Wallmount Format: WM0,1,2 (USA/Japan)/ WM3 (Euro-stecker)/
WM4 (Schuko-stecker)/ WM5(UK)/WM6, 6G(Australia).
Desktop Format: IEC320 Inlet Type DT7-3P or DT8-2P.
Mouse Power Pig-Tail: PT1/2/3/4/5/6/7.
Input Connector for HES10B Series: WM1 (USA/Japan) only.
Input Frequency: 47-63Hz.
Inrush Current: 48A @230Vac or 27.8A @230Vac typical
by adding thermister.
Input Current: 0.3A@115Vac/0.10A@230Vac typical.
Dielectric Withstand: Meet IEC60950.
EMI: Meet EN55022 / FCC Class B.
Hold-up Time: 15mS @115Vac or 60mS @230Vac typical.
Output Voltage: See Ratings Chart.
Output Current: See Ratings Chart.
Output Wattage: 10-12Watts typical.
Output Connector: Optional.
Line Regulation: 0.1% typical.
Load Regulation for HES10 and HES10B Single O/P:
±1.5-3.0% typical.
Load Regulation for HES10 Series Dual O/P:
Main O/P VO1 ±1.5-3.0% typical.
Aux. O/P VO2 ±3.0-5.0% typical.
Noise & Ripple: 1.0% typical peak to peak.
OVP: Built-in, Zener diode clamp.
Overload Protection (OLP):
Fully protected against output overload and short circuit.
OLP set at about 125-150% rating output wattage.
Consult the factory for OLP setting.
GENERAL SPECIFICATION
Efficiency: 70-75% typical.
Switching Frequency: HES10 approximate 40-50K Hz.
HES10B approximate 50-200K Hz.
Circuit Topology: Fixed Frequency Flyback ckt. for HES10 series.
Free Running Flyback ckt. for HES10B series.
Transient Response: Output voltage returns in less than 3mS
following a 25% load change.
Power Density: 1.3-1.56Watts / Cubic inch.
Operating Temperature: 0 to +25/35/40°C
without derating. (various with output voltage)
Storage Temperature: -20°C to +85°C.
Temperature Coefficient: 0.04% /°C.
Cooling: Free air convection.
Construction: Impact resistant thermo- plastic enclosure case.
Construction: Wallmount or Desktop Format.
Safety Standard: Meet UL1950/EN60950, Class II.
Class I available for WM2,5,6G /DT7/PT2,4,5,7.
NOTE: (1) All measurements are at nominal input, full load, and +25°C unless otherwise specified.
(2) Load regulation is measured at 115Vac or 230Vac in percentage to indicate the change in output voltage as the load is varied from half load to full load (±%).
(3) The exact obtainable load regulation depends upon the output cord selected and load current. Upper data are for 6 ft. (2 m) cord AWG#18 wires.
(4) Due to requests in market and advances in technology, specifications subject to change without notice.
For the details of safety approval, please consult the factory.
-7-
HES10 SERIES
MODEL NO. DESCRIPTION: HES10 – X X X YY – N – S
AC PLUG TYPE:
[0] WM0 (Fold-out ), [1] WM1, [2]WM2, [3]WM3,
[4] WM4, [5] WM5, [6] WM6, [6G] WM6G
[7] DT7 (IEC320 3-pin or 3L-pin),
[8] DT8 (IEC320 2-pin).
[A] PT1, [B] PT2, [C] PT3, [D] PT4
[E] PT5, [F] PT6, [G] PT7,
SINGLE OUTPUT: [0] for no Aux. O/P.
DUAL AUX. O/P SET:[A]+5V, [B]+12V, [C]+15V,
[D]+18V, [E]+24V, [F]-5V,
[G]-12V, [H]-15V, [I]-18V,[J]-24V
OUTPUT CURRENT
OUTPUT VOLTAGE
SERIES NAME (HiTRON External Switcher): About 10W
OUTPUT VOLTAGE/CURRENT RATINGS CHART
DEFINED OUTPUT VOLTAGE (Vdc)
3.3 Vdc ≤ Any Voltage ≤ 12.0Vdc
12.0Vdc < Any Voltage ≤ 24.0Vdc
OUTPUT VOLTAGE (Vdc) / CURRENT (A)
3.3V/2.5A, 3.4-5.0V/2.0A, 5.1-5.9V/1.9-1.7A, 6.0-6.3V/ 1.6A,
6.4-6.7V/1.6-1.5A, 6.8-7.2V/1.4A, 7.4-7.7V/1.3A, 7.8-8.4V/1.2A,
8.5-8.9V/1.1A, 9.0-12V/1.0A.
Special: 6.0-6.5V/2.0A
12.1-13.3V/0.9A, 13.4-15.0V/0.8A, 15.1-17.1V/0.7A,
17.2-20.0V /0.6A, 20.1-24.0V/0.5A. Max. Output: 12.0 W.
Note: Refer to the upper Chart or specify the V/A ratings and consult factory for the exact Model No.
SINGLE OUTPUT (Model No. for examples. )
MODEL NO.
HES10-03325-0-1
HES10-03420-0-3
HES10-05020-0-5
HES10-06016-0-6
HES10-12010-0-0
HES10-07014-0-7
HES10-08511-0-8
HES10-09010-0-A
HES10-10010-0-B
HES10-12010-0-C
HES10-13808-0-D
HES10-15008-0-E
HES10-16007-0-F
HES10-18006-0-G
HES10-06020-0-0
HES10-06020-0-1
HES10-24005-0-2
AC INPUT
90-264Vac
90-264Vac
90-264Vac
90-264Vac
90-264Vac
90-264Vac
90-264Vac
90-264Vac
90-264Vac
90-264Vac
90-264Vac
90-264Vac
90-264Vac
90-264Vac
90-264Vac
90-264Vac
90-264Vac
AC PLUG
WM1
WM3
WM5
WM6
WM0
DT7
DT8
PT1
PT2
PT3
PT4
PT5
PT6
PT7
WM0
WM1
WM2
O/P VOLTAGE
3.3Vdc
3.4Vdc
5.0Vdc
6.0Vdc
12.0Vdc
7.0Vdc
8.5Vdc
9.0Vdc
10.0Vdc
12.0Vdc
13.8Vdc
15.0Vdc
16.0Vdc
18.0Vdc
6.0Vdc
6.0Vdc
24.0Vdc
O/P CURRENT
2.5A
2.0A
2.0A
1.6A
1.0A
1.4A
1.1A
1.0A
1.0A
1.0A
0.8A
0.8A
0.7A
0.6A
2.0A
2.0A
0.5A
DUAL OUTPUT V/A CHART
OUTPUT RAIL
Main O/P VO1
Aux. O/P ±VO2 =
OUTPUT VOLTAGE (Vdc) / CURRENT (A)
5.0V/1.0A, 5.1-5.9V/0.9A, 6.0-7.5V/0.8A, 7.6-9.0V/0.7A,
9.1-12.0V/0.6A, 12.1-14.0V/0.5A, 14.1-20.0V/0.4A.
5V/0.6A, 12V/0.3A, 15V/0.2A, 18V/0.2A, 24V/0.1A.
Note: Refer to the upper Chart or specify the V/A ratings and consult factory for the exact Model No.
-8-
FORMAT
Wallmount
Wallmount
Wallmount
Wallmount
Wallmount
Desktop
Desktop
Mouse-PT
Mouse-PT
Mouse-PT
Mouse-PT
Mouse-PT
Mouse-PT
Mouse-PT
Wallmount
Wallmount
Wallmount
DUAL OUTPUT (Model No. for examples. )
MODEL NO.
AC INPUT
AC PLUG
HES10-03310-A-1
90-264Vac
WM1
MAIN O/P VO1
VOLT.
TYP.
1.0A
+3.3Vdc
AUX. O/P VO2†
VOLT.
TYP.
0.6A
+ 5.0Vdc
Wallmount
HES10-05010-B-3
90-264Vac
WM3
+5.0Vdc
1.0A
+12.0Vdc
0.3A
Wallmount
HES10-05209-C-5
90-264Vac
WM5
+5.2Vdc
0.9A
+15.0Vdc
0.2A
Wallmount
HES10-06008-D-6
90-264Vac
WM6
+6.0Vdc
0.8A
+18.0Vdc
0.2A
Wallmount
HES10-09007-E-7
90-264Vac
DT7
+9.0Vdc
0.7A
+24.0Vdc
0.1A
Desktop
HES10-12006-F-A
90-264Vac
PT1
+12.0Vdc
0.6A
-5.0Vdc
0.6A
Mouse PT
HES10-13505-G-B
90-264Vac
PT2
+13.5Vdc
0.5A
-12.0Vdc
0.3A
Mouse PT
HES10-15004-H-C
90-264Vac
PT3
+15.0Vdc
0.4A
-15.0Vdc
0.2A
Mouse PT
HES10-18004-I-E
90-264Vac
PT5
+18.0Vdc
0.4A
-18.0Vdc
0.2A
Mouse PT
HES10-20004-J-G
90-264Vac
PT7
+20.0Vdc
0.4A
-24.0Vdc
0.1A
Mouse PT
FORMAT
HES10B SERIES
MODEL NO. DESCRIPTION: HES10B – X X X YYY – 0 – S
[1] ONLY FOR WM1 AC PLUG
[0] FOR SINGLE OUTPUT ONLY
OUTPUT CURRENT
OUTPUT VOLTAGE
SERIES NAME (HiTRON External Switcher) : About 10W
OUTPUT VOLTAGE/CURRENT RATINGS CHART
DEFINED OUTPUT VOLTAGE (Vdc)
3.0Vdc ≤ Any voltage < 9.0Vdc
9.0Vdc ≤ Any voltage ≤ 30.0Vdc
OUTPUT VOLTAGE (Vdc) / CURRENT (A)
3.0-5.0V/2.0A, 5.1-5.3V/1.9A, 5.4-5.6V/1.8A,
5.7-5.9V/1.7A, 6.0-6.3V/1.6A, 6.4V-6.7V/1.5A,
6.8-7.2V/1.4A, 7.3-7.7V/1.3A, 7.8-8.4V/1.2A,
8.5-8.9V/1.1A.
9.0-12.0V/1.0A, 12.1-13.3V/0.9A, 13.4-15.0V/0.8A,
15.1-17.1V /0.7A, 17.2-20.0V/0.6A, 20.1-24.0V/0.5A,
24.1-30.0V/0.4A.
Note: Refer to the upper Chart or specify the V/A ratings and consult factory for the exact Model No.
SINGLE OUTPUT (Model No. for examples)
MODEL NO.
AC INPUT
AC PLUG
O/P VOLTAGE
O/P CURRENT
FORMAT
HES10B-03320-0-1
90-132Vac
WM1
3.3Vdc
2.0A
Wallmount
HES10B-05020-0-1
90-132Vac
WM1
5.0Vdc
2.0A
Wallmount
HES10B-06316-0-1
90-132Vac
WM1
6.3Vdc
1.6A
Wallmount
HES10B-07014-0-1
90-132Vac
WM1
7.0Vdc
1.4A
Wallmount
HES10B-09510-0-1
90-132Vac
WM1
9.5Vdc
1.0A
Wallmount
HES10B-12010-0-1
90-132Vac
WM1
12.0Vdc
1.0A
Wallmount
HES10B-15008-0-1
90-132Vac
WM1
15.0Vdc
0.8A
Wallmount
HES10B-18006-0-1
90-132Vac
WM1
18.0Vdc
0.6A
Wallmount
HES10B-24005-0-1
90-132Vac
WM1
24.0Vdc
0.5A
Wallmount
HES10B-30004-0-1
90-132Vac
WM1
30.0Vdc
0.4A
Wallmount
-9-
MECHANICAL DIMENSIONS: MM [INCHES]
-10-
HES10/WM: 168.0g (5.93Oz.)
HES10/DT: 232.0g (8.18Oz.)
HES10/PT: 210.0g (7.41Oz.)