600 WATTS MEDIUM VOLTAGE CHASSIS MOUNT RESISTORS HPK600 Huntington Electric’s HPK600 Series of power resistors are state-of-the-art 600 Watt resistors that are compact and available in various resistance values. Ideal for variable speed drives, power supplies, robotics, and elevator controls or where an application requires advanced packaging in a high dissipation case. Designed to dissipate 600 Watts into panel mounts via a condensed footprint at voltages up to 5000 VDC. DIMENSION INFORMATION A B C D E F ±.03 (0.8) ±.008 (0.2) ±.02 (0.5) ±.008 (0.2) ±.008 (0.2) ±.03 (0.8) 2.362 (60.0) 1.417 (36.0) 0.197 (5.0) 1.339 (34.0) 2.244 (57.0) 2.560 (65.0) G H J ±.02 (0.5) ±.005 (0.1) ±.02 (0.5) 0.709 (18.0) 0.164 (4.2) 0.276 (7.0) K L M N ±.02 (0.5) ±.02 (0.5) ±.02 (0.5) ±.02 (0.5) 0.197 (5.0) 0.591 (15) 1.181 (30.0) 1.260 (32.0) ORDER INFORMATION STANDARD RESISTANCES HPK600 - K - 100R TYPE TOLERANCE K = 10%, J = 5% RESISTANCE 100R = 100 OHMS ENGINEERING SPECIFICATIONS Operating Temperature Temp. Coefficient Power Rating Electric Strength Voltage Insulation Resistance Max Working Voltage Short Time Overload Voltage Impulse Capacitance/Mass Parallel Capacitance Inductance Max Mounting Torque Max Terminal Torque Creeping Distance Air Distance HUNTINGTON ELECTRIC, INC. 2 3 4 5 10 50 75 100 500 1000 5000 10000 GENERAL CHARACTERISITCS -55 C to 150 C ±150 PPM/ C 600 Watts at 85 C heat sink 6 KVAC, 50 HZ 10 GΩ min @ 500 V 5000 VDC 1000 W @70 C for 10 sec 12 KV BIL 110 pF 40 pF 80 nH 1.8 Nm 2 Nm 42 mm Minimum 14 mm Minimum P.O. BOX 366 POWER RATING is based on 600 W at 85 C heat sink temperature. Use of thermal conduction to heat sink is required. Flatness of cooling plate must be better than 0.05 mm overall, and the roughness should not exceed 6.4 um. RESISTOR: Unique designed for low inductance and capacitance values. Stable element covering high wattages and pulsed loadings. CASE MATERIAL: Epoxy filled UL94-V0 with large creep distance to mass. TERMINALS: Convenient electrical connection with M4 or M5 screws. DIMENSIONS: 2.24” X 2.55” (56.9 X 64.8 mm) HUNTINGTON, IN 46750 (260) 356-0756 www.heiresistors.com