ETC GLT433XX12NC

ELSEMA
1,2,3,4,8 -Channel 433MHz,25mWatt Transmitter.
GLT4330112E, GLT4330212E, GLT4330412E, GLT4330812E,
GLT433xx12NC
433MHz, 25mW GIGALINK™ TRANSMITTERS
Features
• One, two, four & eight channels.
• Wide supply connection – 11.0 to 24.0 Volts DC.
• More than four billion code combinations and no dipswitch
visible, enabling it to be used for high security applications.
• 433 MHz transmissions. No interference from electrical
noise and other signals.
• Microcontroller technology, replaces the traditional dipswitch
coding which eliminates any possible code grabbing.
• Built-in battery monitor. Red LED indicates to the user when the
battery is low.
• Ability to program un-limited number of transmitters to a receiver, making expandability unlimited.
• Uses Gigalink technology, this involves using a receiver cable to program the transmitter. Some transmitters
and receivers are programmed through the air. This is very risky since another person can grab your code.
Applications
• Security, wireless activation/deactivation of domestic or industrial alarms
• Gate operation
• Panic buttons
• Remote Activation of lights
• Simultaneous operation of multiple on/off functions
Description
The 25mW 433MHz GIGALINK™ transmitters are an advanced Remote Control technology available in the
world today. GIGALINK™ is an invention that has revolutionised the entire Remote Control technology
including Elsema's earlier version of FMT- … and FMR- … series. The GLT43312 series, state-of-the-art
invention brings a new dimension in the world of Remote Control technology in domestic, commercial and
industrial applications.
Operating Distance
An operating distance (with an ANT433SSMA antenna) of 1500 metres is possible. Range test was done in an
open area test site with line-of-sight operation.
Case
The GLT43312 Series transmitters are enclosed in an alloy metal case, while the GLT433xx12NC is PCB
assembly only.
The transmitter modes are user selectable by simply setting the 2-Way dip-switch on the transmitter board.
ELSEMA
1,2,3,4,8 -Channel 433MHz,25mWatt Transmitter.
Transmitter Modes
Off Delay 2 – 62 seconds
Transmitter will transmit a 1.5 second transmission burst and then stop for the "off
delay" time selected. The "off delay" time is user selectable between 2 to 62 seconds
by adjusting the trimpot of the transmitter board. If another channel is activated
during the "off delay" period the new channel will be transmitted immediately. When
the "off delay" time lapses, transmitter will transmit another burst. The transmitter
will cycle (transmission and off delay) indefinitely, if at least one channel is activated
and the supply is connected.
Off Delay 10sec – 10 minutes
Same as mode 1 except the "off delay" is user selectable between 10sec to 10
minutes.
Continuous Transmission*
Transmitter will transmit continuously, if at least one channel is activated and supply
is connected. A transmission limit of five minutes is used to comply with local radio
regulations.
To activate a receiver longer than 5 minutes, use a delay off feature in the receiver
(GLR43301) and transmitter. The delay off feature in the receiver needs to be set
more than the transmitter. This ensures that the transmitter keeps resetting the off
delay in the receiver. Refer to Application Note
1.5 – 10 seconds one burst transmission
Transmitter will transmit one burst and then go to standby or sleep mode. Adjusting
the trimpot will vary the burst length. When another channel is activated and supply
is connected, transmitter will emit one new burst.
Sleep mode (20 uA) is activated when all 8-channels are OFF, this applies to all four modes.
(Grey illustrates the position of the DIP switches)
* Refer to the website for further details. Continuous Transmission
ELSEMA
1,2,3,4,8 -Channel 433MHz,25mWatt Transmitter.
Products in the Range
GLT43300
Transmitter
GLT43301
1-Channel
GLT43302
2-Channel
GLT43303
3-Channel
GLT43304
4-Channel
NL: No label
The Elsema Label
is absent.
GLT43308
8-Channel
GLT43316
2-Stroke,
16-Channel
GLT4330112E
1-Channel, 25mW
GLT4330212E
2-Channel, 25mW
GLT43300NC
Transmitter,
No Case
Option Pin header
GLT4330412E
4-Channel, 25mW
GLT43308NC
8-Channel,
No Case
GLT4330812E
8-Channel, 25mW
GLT43308NC
8-Channel, 25mW
No Case
ELSEMA
1,2,3,4,8 -Channel 433MHz,25mWatt Transmitter.
Technical Data
Model
Power Supply
GLT4330112E, GLT4330212E, GLT4330412E, GLT4330812E,
GLT433xx12NC
11- 24V DC
Current Consumption
Max 45mA
Standby Current
20uA (Typical)
Battery Monitor
LED flashes at 1Hz, during transmission, when battery voltage is
at 6.5V (flat 9V battery)
The LED flickers at 12.5Hz during normal operation
433.920MHz (Other frequencies available on request. Refer to
the table below )
Crystal controlled 30 parts per million
-5 to 50°C
Normal Operation
Operating Freq
Carrier Freq Tolerance
Operating Temperature
Range
Radiated RF Power Output
Antenna
Type of Emission
Freq Deviation Limiting
Modulation Freq
Spurious Transmission
Necessary Bandwidth
Digital Coding System
Code Combination
Dimension
Weight
Useable Receivers
Useable Operating Range
25mW
ANT433SSMA
AM 100% depth
1600 - 1900Hz non-return to zero
120Hz to 1.8kHz (15% tolerance)
Less than -40dBm
±2.5kHz
Microcontroller based 96-bit word
Approximately 4.3 billion
90 X 56 X 15 mm (PCB
140 X 60 X 34 mm (Enclosed).
Assembly)
51g excluding battery
225 grams
GLR433... series
Up to 1.5 Km when used with ANT433SSMA
Available Frequencies
SF2
SF3
SF4
SF5
SF6
SF7
SF8
SF9
433.664 MHz
433.408 MHz
433.152 MHz
434.688MHz
434.432 MHz
434.176MHz
433.792 MHz
434.304 MHz
Please quote Correct SF number when ordering transmitters on special frequencies.
ELSEMA
1,2,3,4,8 -Channel 433MHz,25mWatt Transmitter.
Block Diagram
GLT4330112, GLT4330212, GLT4330412, GLT4330812, GLT433xx12NC
Connection Diagram GLT43308NC
Connection Diagram GLT43300NC
Wiring Diagrams
GLT43301E
ELSEMA
1,2,3,4,8 -Channel 433MHz,25mWatt Transmitter.
GLT43302E
GLT43304E
ELSEMA
1,2,3,4,8 -Channel 433MHz,25mWatt Transmitter.
GLT4330812E
ELSEMA
1,2,3,4,8 -Channel 433MHz,25mWatt Transmitter.
GLT433xx12NC
Elsema Pty Ltd
3/10 Hume Rd, Smithfield
NSW 2164
Ph: 02 9609 4668
Fax: 02 9725 2663
Website: www.elsema.com
Distributed by: