ETC NECHIP

NePort™ Hardware Manual
Conextop Technologies Co., Ltd.
All rights reserved
1
Disclaimer
Copyright ©2003
Conextop, Inc.
All rights reserved.
Conextop,NePort,with its patent-pending technology, and neChip are trNePortmarks
of Conextop. All other trademarks are the property of their respective owners.
Contacts
Conextop Ltd.
Room 608, 6/F, Electric Building,
High-tech Park, Nanshan,
Shenzhen, China
Phone: 86-755-26505615
Fax: 86-755-26505565
Technical Support
Online: www.conextop.com/aboutus/contactus.htm
Sales Offices
For a current list of our domestic and international sales offices, go to the Conextop
web site at www.conextop.com
2
Contents
NePort Overview..................................................................................4
1. Features: ............................................................................................................................. 4
2. Product Character: ........................................................................................................... 4
NePort Hardware Description.............................................................6
1. NePort Internal Structure ...................................................................................................... 6
2. NePort Internal Circuit.......................................................................................................... 6
3. PCB Interface........................................................................................................................ 6
4. Ethernet Interface ............................................................................................................... 9
5. Status Leds .......................................................................................................................... 9
6. Capsulation........................................................................................................................ 10
7. PCB Layout ....................................................................................................................... 10
8.Product Mark................................................................................................................... 12
9.Performance Guide ........................................................................................................... 12
10.Evaluation Kit ............................................................................................................... 13
3
NePort Overview
Conextop Technologies target at providing the most reliable and security M2M solution for
the worldwide customers, and NePort is the most compact serial-IP module released in 2002,
which has embedded all in a standard RJ45 connector, Neport is powered by our network
processor SoC(Nechip), which includes a 10/100 MAC/PHY and 256 KB of SRAM on chip.
It features a built-in web server for communications with a device via a standard Internet
browser. Web capability can be used for remote configuration, real-time monitoring or
troubleshooting. Neport has 512 KB of on-chip Flash for web pages and software upgrades.
It acts as a dedicated co-processor that optimizes network activities permitting the host
microprocessor to function at maximum efficiency.
1. Features:
◆ Embed Web Server
Support update customized web
◆ Embed Telnet Server
◆ Provide RS232/422/485 signals.Can communicate with any devices with serial port
◆ Port buffer for every serial port
◆ High efficient Device Management and Trouble shoot tools
◆ All parameters can be configured through internal web server
◆ Provide serial login mode and configure system through serial port
◆ Telnet server enables remote management
◆ Email Alarm and data encryption
2. Product Character:
◆ The most compact size, High intefration
compatible with standard RJ45 connector
◆ High Performance, High Reliability, Industrial Temerature
◆ 32bits RISC NP7 series
(NeChip NP7 series)
ARM7TDMI 55DMIPS
◆ 128KB SRAM
(EN: 256KB SRAM)
256KB/512KB Code + 32KB Boot
◆ 10/100Mbps Ethernet Interface (Auto sensing))
◆ Provide 1-3 high speed serial ports
◆ Serial Port: selectable Data bite 5.6.7.8 bits
◆ Serial Port: selectable stop bite 1,2 bits
◆ Baud rate: 110 – 460800bps
110 – 921600bps (EN Version)
◆ Provide RS485/422 controller
◆ Smart/High reliability networking stacks:
4
ETH、ARP、IP、UDP、TCP、ICMP、PING、BOOTP、AutoIP、DHCP、SNTP、
POP3、SMTP、TFTP、DNS、TELNET、HTTP、PPP/PPPoE
SSH、SSL/TLS、HTTPS(EN Optional)
◆ Embedded Web Server, support update customized webs
◆ Email Alarm according to the triggers(EN Optional)
◆ Data Encryption:
128-,192-,256bit AES / Tri-DES (Optional)
◆ Multiplex communication modes: TCP Server/client, UDP Uni-cast/Multi-cast modes
◆ Provide two programmable I/O
◆ S upport Windows 95/98/ME/NT/2000/XP/2003/XP x64/2003 x64 COM driver、Linux
real、TTY、UNIX
◆ Operation Voltage: 3.14~3.6 VDC
◆ Low Power Consumption: 110 – 155mA @ 3.3V
◆ Support POE
◆ 1.5KV electromagnetism isolation
◆ All pins support anti-static protection
◆ Operation Temperature
0°C to +70°C (32°F to 158°F),5% to 95% RH (Commercial Model)
-40°C to +80°C (-40°F to 176°F),5% to 95% RH (Industrial Model)
◆ Storage Temperature
- 40°C to +80°C (-40°F to 176°F),5% to 95% RH
5
NePort Hardware Description
1. NePort Internal Structure
NePort Integrate nechip,PHY,OSC,Reset and power circuit.
Chart2-1. Internal Structure
2. NePort Internal Circuit
Chart2-2. Function Circuit
3. PCB Interface
NePort can provide up to three high speed serial ports with standard CMOS signals which can
tolerate 5V TTL signals. In the real application, neport’s serial port directly connect to the
local CPU(or other processor) , then user devices can connect to Ethernet through neport
now,serial data from local cpu will be sent to neport,and neport will convert the data from
serial port to Ethernet according to the networking configuration
6
NePort Series include –POE,-L,-R,-EN versions, this doc just descript the standard version of
neport.
NePort series with 8 pins
Chart2-1. Valid for NePort-L 、NePort-R and the other versions with 8 pins
PinNum
Pin Name
Type
Description
1
GND
Power
Ground
2
VDD
Power
Power Input (+3.3V )
3
RESET
Input
Low level to reset ( 5V tolerant )
4
TXD
Output
Serial port: Data Output(5V tolerant )
5
RXD
Input
Serial port: Data Input(5V tolerant )
6
IO/RTS
I/O
Programmable I/O with multiplex Function:( 5V tolerant )
1.RTS( Request to Send): Output, Hardware Flow Control
2.IO(input/output): Can be configured by web or device
manager ( Only for special models)
3.TCP Connection Status,Invalid when hardware flow
control is enabled
4. System status ,Invalid when hardware flow control is
enabled
5. RS-485/RS422 Controller
7
Default
Input
(RS422: Low level)
Low level valid,Force to load factory setting( 5V
tolerant )
Keep this pin be low level for more than 5
seconds,NePort will be forced to load the factory
setting and automatically reboot system
8
IO/CTS
I/O
Programmable I/O with multiplex Function:( 5V tolerant )
1.RTS( Request to Send): InPut, Hardware Flow Control
2.IO(input/output): Can be configured by web or device
manager ( Only for special models)
3.TCP Connection Status,Invalid when hardware flow
control is enabled
4. System status ,Invalid when hardware flow control is
enabled
5. RS-422 Controller: High Level
Mark:
1. Place a 10uF capacitor between power and ground, and had better be close to NePort.
2. Should not connect upload resistance on Reset pin( Pin 3 ).
3. Recommend to connect upload resistance on RTS and CTS pin when uart work under
rs232 mode
4. Recommend to connect download resistance on RTS and CTS pin when uart work under
rs485/422 mode
7
10Pin Model of Neport Series
Chart2-2. Valid for NePort 、NePort-EN Series
PinNum
Pin Name
Type
Description
1
IO/CTS
RXD2
Bid
Programmable I/O with multiplex Function:( 5V tolerant )
1.RTS( Request to Send): InPut, Hardware Flow Control
2.IO(input/output): Can be configured by web or device
manager ( Only for special models)
3.TCP Connection Status,Invalid when hardware flow
control is enabled
4. System status ,Invalid when hardware flow control is
enabled
5. RS-422 Controller: High Level
6.UART2 TXD
2
GND
Power
Ground
3
VDD
Power
Power Input (+3.3V )
4
RESET
Input
Low level to reset ( 5V tolerant )
5
TXD1
Output
Serial port: Data Output(5V tolerant )
6
RXD1
Input
Serial port: Data Input(5V tolerant )
7
IO/RTS
TXD2
Bid
Programmable I/O with multiplex Function:( 5V tolerant )
1.RTS( Request to Send): Output, Hardware Flow Control
2.IO(input/output): Can be configured by web or device
manager ( Only for special models)
3.TCP Connection Status,Invalid when hardware flow
control is enabled
4. System status ,Invalid when hardware flow control is
enabled
5. RS-485/RS422 Controller
6.UART2 TXD
8
Default
Input
(RS422: Low level)
Low level valid,Force to load factory setting( 5V
tolerant )
Keep this pin be low level for more than 5
seconds,NePort will be forced to load the factory
setting and automatically reboot system
9
IO/P+
TXD3
Bid
1. IO(input/output): Can be configured by web or
device manager ( Only for special models)
2. Anode output Of PoE
3. UART3 TXD
10
IO/P+
RXD3
Bid
1. IO(input/output): Can be configured by web or
device manager ( Only for special models)
2. Cathode output of PoE
3. UART3 RXD
8
Mark::
1. Place a 10uF capacitor between power and ground, and had better be close to NePort
2. Should not connect upload resistance on Reset pin( Pin 3 )
3. Recommend to connect upload resistance on RTS and CTS pin when uart work under
rs232 mode
4. Recommend to connect download resistance on RTS and CTS pin when uart work under
rs485/422 mode
5. 8Pin Models are compatible with 10Pin models of NePort Series except CTS、P+、Psignals。
4. Ethernet Interface
NePort has integrated Ethernet transformer,RJ45 connector and status leds
Chart2-3.
Standard Ethernet signals(Industrial Starndard)
Signal
Type
Pin Num
Function Description
Mark
TX+
Output
1
Transmit signal: Positive
TX-
Output
2
Transmit signal: cathode
RX+
Input
3
Receive signal: Positive
RXNot used
Input
6
Receive signal: cathode
4
Not used
5
Not used
7
Not used
8
SHIELD
Shield (Connect to Ground)
2KV electromagnetism
Isolation
Mark: Please refer to Sheet2-4 for detailed pin description of RJ45 connector
5. Status Leds
NePort includes the follow status leds
◆
LINK(Green, Left Led)
◆
ACT(Yellow,Right Led)
Chart2-3. NePort Front View (Led)
Left Led
Right Led
Pin 8
Pin 1
Shield(GND)
Shield(GND)
9
Sheet2-4.Description of status leds
LINK LED (Left)
Status
ACT LED (Right)
Description
ON
OFF(Flash)
Status
Description
Link is normal
Flash
Transceive Ethernet packets
Cable dropped / Link
OFF
No data flow
disconnected
6. Capsulation
NePort Shell as below:
Chart2-5. Bottom View
mm
9
2
7- 5- 3 -1
Dim
Min
Typ
Max
A
10.78
10.80
10.96
B
11.43
C
6.35
D
2.54
E
2.54
F
1.27
G
37.92
38.20
38.50
H
3.10
3.15
3.20
I
2.80
2.85
2.90
Chart2-6. Side View
mm
Fixed
Dim
A
Min
0.20
Typ
0.25
Max
0.30
Shield
Pin
B
10.78
10.80
10.96
C
-
17.15
-
D
2.85
3.05
3.25
E
-
2.54
-
F
-
1.80
-
7. PCB Layout
For high reliability application with NePort embedded in user products,the follow
items are strongly recommended:
1. Should place decoupling capacitor(0.1uF) beside neport
2. Place 10uF capacitor between power and ground beside neport
10
3. Had better provide isolated/independent power(3.3V) for neport
Chart2-7. Recommended PCB Capsulation
Back
Front
10
NePort has integrated power-on reset circuit inside, no need external circuit to
power-on reset neport, so reset pin can be left unconnected, if user need reset neport by
additional I/O provided by MCU/DSP, we will recommend the follow application circuit.
Chart2-8. Recommended application circuit
11
8.Product Mark
Product mark includes the follow information. (Chart2-9)
1. Neport series
2. MAC address
3. Part number
4. Operation condition: temperature and work voltage
Chart2-9. Product mark
MAC Address
00-F0-0A-02-BE-01
Part Number
9.Performance Guide
Sheet2-4.
NePort electrical parameters
Name
Description
Min
Max
Unit
VDD
Power Volatage
-0.3
3.6
V
I DD
Work Current
140
170
mA
Condition
Full loading (-40 ℃ /
+85℃)
VI
Signal input voltage
0
5.5
V
VO
Signal output voltage
0
VDD
V
VIH
High level input voltage
2
-
V
VIL
Low level input voltage
0.8
V
VOH
High level output voltage
VOL
Low level output voltage
I OH
High level output current
-4
-
VOH= VDD-0.4V
I OL
Low level output current
4
-
VOL= 0.4V
VDD-0.4
-
0.4
12
Sheet2-5. Normal electrical parameters
Name
Description
Min
Typical
Max
Unit
Condition
VDD
Work Voltage
3.1
3.3
3.5
V
I DD
Work Current
140
150
160
mA
soldering
Jointing
Jointing Tem:260℃±5℃,DippingTime≤5±0.5s
10.Evaluation Kit
The evaluation kit targets at helping customers to integrate neport in their products
efficiently. It includes the follow components
◆ NePor Evaluation Board
◆ NePort
◆ +9V Power Adaptor
◆ RS232 cross-over cable(DB9,Fmale-Female)
◆ CAT5e UTP RJ45M/M
◆ Product Disk
Chart 2-10. Evaluation Kit
Description of EVB
This Kit provide the whole platform for testing neport series, it includes ae
neport(Standard version), a neport plug with 8/10 pins,standard RS232 interface with coms
to rs232 converter chip and led indicators
13
Chart 2-11. Evaluation Board
NePort1
key
Default
Power input
NePort1
Plug
DB9 Port
Onboard
NePort2
00.F0.0A.02.00.1A
Channel switches
NePort1/2
Reset key
8Pin/2.0 Pitch
NePort2
Default key
14
Chart 2-10. Schematic of Evaluation Board
15
RS232 Interface
There is one onboard RS232 chip from SIPEX, it is used to convert 3.3V COMS signals
to RS232 signal, normally, RS232 interface provide one DB9 connector to communicate with
external DTE, for instance, connect to PC serial port.
Chart 2-11. DB9 Pin Information
Sheet 2-6. Signal Description of RS232 Interface
NePort Signal
Terminal Device(DTE)
DB9 Pin #
Signal Name
DB9 Pin #
Signal Name
2
RXD
2
TXD
3
TXD
3
RXD
5
GND
5
GND
7
RTS
7
CTS
8
CTS
8
RTS
Mark:1. Pin not listed in the above sheet is not used by evaluation board
2. Recommend to make the shield of DB9 connect to ground
Power
On board DC JACK with internal size : 2.0mm,,power circuit support pole protection,
input voltage arrange:7.5V~12V。adjustable power chips are LM2596 DC-DC and
LM1117-3.3V LDO from SIPEX。
Selectable Channel Switch
The Evaluation board provide 8bits DIP16/8 switch to select neport1 or neport2 to
communicate with external rs232 interface. Push switch to ON will enable the corresponding
signal.
Attention:
1. User just can enable one group of this 8bits switch,(group 1:one:1-4 , Group 2:5-8), or
Evaluation board can’t communicate with external rs232 devices
2. When all of 8bits switch are disconnected or one group are disconnect but no neport
on the other group, such setting may cause no signal output to rs232
8Pin/2.0 pitch header
The Evaluation board provides 8pins pitch header for OEM/ODM customized
development, and this pitch header can make neport signals connect to user’s MCU/DSP
efficiently to debug or testing according to the real application
Attention:
Should disconnect the extern rs232 interface to avoid effect testing result
Buttons
The Evaluation Board integrates three buttons used as reset / defaulting setting
16
NePort Summary
Embedded Seial-IP series
NePort –L Series NePort-R Series
NePort Series
NePort-EN Series
Single port series
LX
SX
EXH
LX
RX
-485
Memory and Speed
Core and System
Serial Interfaces
RX
-485
SX
-485
EXH
ESX
-485
Flash
128k
128k
256k
256k
512k
512k
512k
512k
512k
Code/Boot(KB)
/32
/32
/32
/32
/32
/32
/32
/32
/32
SRAM(KB)
80/128
80/128
128
128
256
256
256
256
256
Speed (MIPS)
55
55
55
55
55
55
60
60
60
ARM7TDMI
Y
Y
Y
Y
Y
Y
Y
Y
Y
Multi-T RTOS
Y
Y
Y
Y
Y
Y
Y
Y
Y
Ethernet Speed (M)
10/100
10/100
10/100
10/100
10/100
10/100
10/100
10/100
10/100
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Uart
RS232
Y
RS485/422
Y
Y
Max-Baudrate(bps)
115200
115200
460800
460800
460800
460800
921600
921600
921600
Serial port Number
1
1
1
1
1
1
1/2/3
1/2/3
1/2/3
Programmable I/O
PIO Number
--
2
--
2
--
--
--
2
2
Protocol stacks
ARP/IP/ICMP/DHCP
Y
Y
Y
Y
Y
Y
Y
Y
Y
TFTP
Y
Y
Y
Y
Y
Y
Y
Y
Y
SNTP
--
--
--
--
Y
Y
--
Y
Y
--Y
Y
Y
Y
Y
Y
Y
Y
/BOOTP/TCP/UDP
Http Server
(web customized)
Telnet Server
Y(*)
Y(*)
Y
Y
Y
Y
Y
Y
Y
DNS
Y(*)
Y(*)
Y(*)
Y(*)
Y
Y
Y
Y
Y
Smtp (Email Trigger)
--
--
--
--
Y(*)
Y(*)
--
Y
Y
PPP/PPPOE
--
--
--
--
--
Y(*)
--
--
Y
Advanced
SSH
--
--
--
--
--
--
--
--
Y
encryption
SSL/TLS
--
--
--
--
--
--
--
--
Y
protocols
Https
--
--
--
--
--
--
--
--
Y
Smtps
--
--
--
--
--
--
--
--
Y
Encryption
AES
--
--
--
--
--
--
--
--
Y
Arithmetic
DES/Triple-DES
--
--
--
--
--
--
--
--
Y
RC4
--
--
--
--
--
--
--
--
Y
MD5
--
--
--
--
--
--
--
--
Y
Power suppler(V)
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
I/O Tolerant(V)
5
5
5
5
5
5
5
5
5
PowerConsumption
10Base-T Activity
165
165
165
165
165
165
165
165
165
(mA)
100Base-T Activity
155
155
155
155
155
155
155
155
155
C,I
C,I
C,I
C,I
C,I
C,I
C,I
C,I
C,I
RJ45
RJ45
RJ45
RJ45
RJ45
RJ45
RJ45
RJ45
RJ45
Low
Low
Cost
Cost
Analog parameters
Operating temperature arrange
C=0-
+75°C
Package Option
I = - 40 - +85°C
(RJ45)
17
More details by: http://www.conextop.com/products/embeddedsolution/wiredmodules/index.htm
For details contact your local Conextop representative or
Conextop directly:
call OEM sales support at 86-755-26505615
More details about NePort at http://www.conextop.com
© Conextop Technologies –November 2003 - All rights reserved
The Conextop corporate logo is a registered trademark of Conextop Technology. All other names are the property of their respective owners.
©2003 Conextop, Inc. All rights reserved. Conextop, NePort, with its patent-pending technology, and neChip are trademarks
of Conextop. All other trademarks are the property of their respective owners. Specifications subject to change without notice.
All rights reserved.
18