OLF100 Phototransistor ISO LINK Hermetic Surface Mount Optocoupler .015±.002 1 ANODE 7 3 4 S 2 OLF XXX BASE XXYY 1 8 7 6 5 .050 BSC COLLECTOR 5 CATHODE EMITTER 2 6 .180 SQ. MAX .200 MIN. .100 MAX. .030±.005 .004/.006 SEATING PLANE SCHEMATIC Features ♦ Hermetic SMT package ♦ Compliant surface mounting leads ♦ High current transfer ratio ♦ Small package size ♦ High reliability and rugged construction PACKAGE OUTLINE Description The OLF 100 consists of a light emitting diode optically coupled to a NPN silicon phototransistor mounted in a 8-pin hermetic surface mount flat pack package. The leads can be formed to provide compliant solder connections to the mounting substrate. Special electrical parametric selections are availabe on request. ♦ 100% hi-rel screenings are offered NOTES: 1. Measured between pins 1, 2 , 3 and 4 shorted together and pins 5, 6, 7 and 8 shorted together. TA = 25°C and duration = 1 second. 2. Derate linearly to 125°C free-air temperature at 0.67 mA / °C above 65°C. 3. For pulse width ≤ 1 µS, pulse repetition rate ≤ 300 pps. 4. Derate linearly to 125°C free-air temperature at 3.0 mW / °C above 25 °C Absolute Maximum Ratings Coupled Input to Output Isolation Voltage Storage Temperature Range Operation Temperature Range Mounting Temperature Range ( 10 seconds max. ) ± 1000 Vdc -65 °C to + 150 °C -55 °C to + 125 °C 240 °C Input Diode Average Input Current Peak Forward Current Reverse Voltage 40 mA 1A 2.0 V Output Detector Collector - Emitter Voltage Emitter - Base Voltage Collector - Base Voltage Continuous Collector Current Power Dissipation 40 V 7V 45 V 50 mA 300 mW ELECTRICAL CHARACTERISTIC ( TA = - 55 °C to +125 °C, Unless Otherwise Specified ) Parameter Symbol Current Transfer Ratio CTR Saturation Voltage VCE(SAT) Breakdown Voltage Collector to Emitter Collector to Base Emitter to Collector BVCEO BVCBO BVECO Min 100 100 Typ. Max Units I F = 10 mA, VCE = 5.0V I F = 1mA, VCE = 5.0V V I F = 10mA, I C = 1.0mA V V V I CE = 100 µA, TA = 25 °C I CB = 10 µA, TA = 25 °C I EC = 100 µA, TA = 25 °C 100 100 nA µA VCE = 20V, TA = 25 °C VCE = 20V, TA = 100 °C 1.7 V I F = 10mA 100 µA V R = 3.0V 1.0 µA Relative Humidity ≤ 50% TA = 25 °C, V I - O = 1000 Vdc VCC = 10V, RL = 100 Ω I C = 2mA, TA =25 °C 0.3 30 70 5 Leakage Current Collector to Emitter I CEO Input Forward Voltage VF Input Reverse Current IR Input to Output Leakage Current I I-O Turn On Time t ON 5 15 µS Turn Off Time t OFF 5 15 µS 0.90 1.3 Fig. Note % % 200 200 0.15 Test Conditions 2,3 2 1 1 4,5 ALL TYPICAL @ TA = 25°C 3.0 45 2.9 40 SHORT CIRCUIT CURRENT ( µA) FORWARD VOLTAGE (V) TYPICAL PERFORMANCE CURVES 2.8 2.7 2.6 2.5 I F = 10mA 2.4 35 30 25 20 10 2.3 2.2 5 -55 -25 0 25 50 75 100 0 125 0 5 10 TEMPERATURE (°C) Fig. 1 - LED Forward Characteristics 25 30 35 40 Circuit Current NORMALIZED SHORT CIRCUIT CURRENT (µA) 17.5 15.0 12.5 10.0 7.5 5.0 2.5 0 5 10 15 20 25 30 35 1.6 1.2 1.0 0.8 0.6 0.4 0.2 0 40 Normalized to: I F = 10mA T A = 25°C 1.4 -55 INPUT CURRENT (mA) Circuit Voltage -25 25 50 75 100 125 Fig. 4 - Normalized Short Circuit Current vs. Temperature 20 18 16 14 12 I F = 10mA 10 8 6 4 0 TEMPERATURE (°C) Fig. 3 - Input Current vs. Output Open- OPEN CIRCUIT VOLTAGE (V) OPEN-CIRCUIT VOLTAGE ( V ) 20 Fig. 2 - Input Current vs. Output Short- 20.0 0.0 15 INPUT CURRENT (mA) -55 -25 0 25 50 75 100 125 TEMPERATURE (°C) Fig. 5 - Open Circuit Voltage vs. Temperature