MICROSEMI LX1692AIPW

LX1692A
®
TM
Full Bridge Resonant CCFL Controller
P RODUCTION D ATA S HEET
KEY FEATURES
DESCRIPTION
The LX1692A regulates the CCFL
brightness in three ways: analog
dimming, digital dimming, or combined
analog and digital dimming methods
simultaneously to achieve the widest
dimming range (> 60 to 1).
The LX1692A can accept a
brightness control signal that is either
an analog voltage or a direct low
frequency PWM.
The
LX1692A
also
features
integrated gate drivers for the four
external power MOSFETs.
An integrated 4V LDO powers all
internal control circuitry greatly
simplifying supply voltage requirements.
The LX1692A is available in a 20Pin TSSOP.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
Protected by U.S. Patents: 5,615,093; 5,923,129; 5,930,121; 6,198,234; Patents Pending
ƒ For Wide Voltage Range Inverter
Application (7V to 22V)
ƒ Patent resonant strike for
unsurpassed striking power
combined with best efficiency
ƒ Low Stress to transformers
ƒ Excellent open circuit voltage
regulation reduces transformer
breakdown voltage requirements
while striking higher voltage
lamps
ƒ One inverter for multiple panel
types
ƒ Wide Dimming Range
Analog Dimming: >3 to 1
Digital Dimming : >20 to 1
Combined: >60 to 1
ƒ Fool-Proof Striking
ƒ Programmable Burst Dimming
Frequency
ƒ Programmable Time Out
Protection
ƒ Fixed Operating Frequency
ƒ Open lamp voltage protection,
Short lamp protection, Arc
Protection1
ƒ Compatible with Existing
Transformers
WWW . Microsemi .C OM
Microsemi’s LX1692A is a cost
reduced, third generation Direct Drive
CCFL (Cold Cathode Fluorescent
Lamp) controller. The integrated
controller is optimized to drive
CCFL’s using resonant full bridge
inverter topology.
Resonant full bridge topology
provides near sinusoidal waveforms
over a wide supply voltage range in
order to maximize the life of CCFL
lamps, control EMI emissions, and
maximize efficiency. This new architecture also provides a wide dimming
range.
The LX1692A includes safety
features that limit the transformer
secondary voltage and protect against
fault conditions which include open
lamp, broken lamp and short-circuit
faults.
BENEFITS
ƒ Even Display Light Distribution
ƒ Longer Lamp Life with Optimized
Lamp Current Amplitude
ƒ Reduced Operating Voltage
Lowers Corona Discharge and
Prolongs Module Life
ƒ High “Nits / Watt” Efficiency
Makes Less Heat and Brighter
Displays
APPLICATIONS
ƒ Notebook PC
LX1692A
PACKAGE ORDER INFO
TA (°C)
PW
Plastic TSSOP
20-Pin
RoHS Compliant / Pb-free
-20 to +85
LX1692AIPW
Note: Available in Tape & Reel. Append the letters “TR” to the
part number. (i.e. LX1692AIPW-TR)
1
Arc protection is provided if the arcing level is enough to be trigged.
Copyright © 2004
Rev. 1.1, 2/27/2006
Microsemi
Integrated Products Division
11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570
Page 1
TM
®
Thank you for your interest in Microsemi® IPG products.
The full data sheet for this device contains proprietary information.
To obtain a copy, please contact your local Microsemi sales representative. The
name of your local representative can be obtained at the following link
http://www.microsemi.com/contact/contactfind.asp
or
Contact us directly by sending an email to:
[email protected]
Be sure to specify the data sheet you are requesting and include your company
name and contact information and or vcard.
We look forward to hearing from you.
Copyright
Microsemi
Integrated Products Division
11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570
WWW . Microsemi .C OM
INFORMATION