TMC-5A31-xxx High speed VCSEL TO-46 metal can FEATURES: • Industry standard TO-46 package with cap lens. • Optimized for fiber optical communication with a monitor PD. • Low dependence of electrical and optical characteristic over temperature. • Symmetrical beam. • High coupling efficiency to multi-mode fibers directly. • Speed > 1 GHz. ELECTRO-OPTICAL CHARACTERISTICS: PARAMETERS SYMBOL MIN TYP MAX UNIT Threshold Current Output Power Ith Po 1 3 2 6 3 mA mW Operating Current IOP Slope Efficiency Wavelength Forward Voltage Breakdown voltage Series Resistance Monitor Current Focal Length η λP VF VBD RS IM F 12 mA 0.25 850 1.9 15 40 25 0.7 830 1.7 10 10 TEST CONDITIONS(1) 860 2.3 mW/mA nm V V Ω uA mm IF =12 mA(2) Adjustable to establish 1.5 mW output power IF=12 mA(3) IF=12 mA IF=12 mA IR=10 µA IF =12 mA VR=5 V, Po = 1.5 mW From the surface of lens Notes: 1. All parameters except mentioned are measured at IF=12 mA, 25°C, CW. 2. Higher power can be provided under request. 3. Slope efficiency is defined as ∆P/(12-Ith) at 25°C. THERMAL CHARACTERISTICS: PARAMETERS Thermal Resistance Ith Temperature Variation VF Temperature Coefficient η Temperature Coefficient λP Temperature Coefficient SYMBOL Rth ∆Ith ∆VF/∆T ∆η/∆T ∆λP/∆T MIN TYP MAX 900 -1 -2.5 -0.15 0.06 1 -3.5 UNIT TEST CONDITIONS °C /W mA mV/°C %/°C nm/°C TA=25°C TA=0~70°C TA=0~70°C, IF=12 mA TA=0~70°C, IF=12 mA TA=0~70°C, IF=12 mA ABSOLUTE MAXIMUM RATINGS: PARAMETERS MIN MAX UNIT Storage Temperature Operating Temperature Lead Solder Temperature Continuous Forward Current Continuous Reverse Voltage -40 -20 125 85 260 40 10 °C °C °C mA V CONDITIONS 5 seconds TMC-5A31 Fig. 1 Typical Optical Characteristics Fig. 2 Typical Electrical Characteristics Typical Voltage vs Current 4 3 3 Volt age (V) Outp ut Power (m W) Typical Output Power vs Current 4 2 2 1 1 Ith 0 0 0 5 10 15 0 20 5 10 Fig. 3 Spectrum When Driving Current 15 mA 15 20 Current (mA) Current (mA) Fig. 4 Temperature Dependence of Threshold Current Typical Threshold Current vs Ambient Temperature Threshold Cur rent (m A) 8 7 6 5 4 3 2 1 0 -40 -20 0 20 40 60 o Ambient Temperature ( C) 3 transverse modes typically. WARNING: The VCSEL is a class IIIb laser in the safety standard ANSI Z136.1 and should be treated as a potential eye hazard. 80 100 New TMC-5A31 OUTLINE DIMENSIONS: • Unit: mm • PINOUT: TMC-5A31-801 TMC-5A31-802 TMC-5A31-803 Pin 1: VCSEL Anode Pin 1: VCSEL Cathode Pin 1: VCSEL Anode Pin 2: VCSEL Cathode PD Anode Case Pin 2: VCSEL Anode PD Cathode Case Pin 2: VCSEL Cathode PD Cathode Case Pin 3: PD Cathode Pin 3: PD Anode Pin 3: PD Anode TrueLight reserves the right to make changes due to the improvement of process and package technology. 3