ETC OM7670NK

OM7670 Series
OM7671 Series
1.5 AMP AND 3 AMP LOW DROPOUT
3.3 VOLTAGE POSITIVE REGULATOR
+3.3 Volt, Low Dropout Positive Regulators
in Hermetic Packages
Please see mechanical
outlines herein
FEATURES
•
•
•
•
•
•
•
Low Dropout Voltage and Ground Currents
High Current Capability
Built-In Thermal Overload Protection
Short Circuit Current Limiting
Output Voltage Tolerance Guaranteed to + 1%
Available in Multiple Hermetic Package Styles
Output Current from .75A to 3.0A
DESCRIPTION
This series of +3.3 Voltage Regulators are high current, high accuracy, low dropout regulators
and well suited for systems where extremely low dropout voltages is critical. They feature full
protection against overcurrent faults, reversed input polarity, reversed lead insertion, over temperature operation and positive and negative transient voltage spikes. They are available in a
number of hermetic package styles where critical environmental systems demand high performance.
ABSOLUTE MAXIMUM RATINGS @ 25°C
Operating Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Volts
Output Current - Package Dependent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .See Below
Operating Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-55 to + 125 °C
Storage Temperature Range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-65 to + 150 °C
Lead Temperature, Soldering for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300°C
Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . + 150 °C
ORDERING INFORMATION - OM7670/71 SERIES
PART NUMBER
OUTPUT CURRENT (AMP)
OM7670NK
OM7671NK
OM7670NM
OM7671NM
OM7670SM
OM7671SM
OM7670ST
OM7671ST
OM7670N2
1.5
3.0
1.3
2.6
1.3
2.6
1.3
2.6
.75
THERMAL RESISTANCE
Package Style
1 11 R2
Supersedes 9 01 R1
PACKAGE
TO-204AA
TO-204AA
Surface Mount - SMD1
Surface Mount - SMD1
Surface Mount - SMD3
Surface Mount - SMD3
TO-257AA Isolated Tab
TO-257AA Isolated Tab
LCC-28
Junction to Case
MAX POWER - WATTS
OM7670 Series OM7671 Series
LCC-28
20°C/Watt
5
----
TO-257AA, SMD-1 and SMD-3
4.2°C/Watt
13
26
TO-204AA (TO-3)
3.0°C/Watt
15
30
Table 1
OM7670 Series
OM7671 Series
ELECTRICAL CHARACTERISTICS
-55°C ≤ TA ≤ 125°C (unless otherwise specified)
Parameter
Symbol
Test Conditions
Min.
Max.
Unit
Output Voltage
VOUT
VIN = 5.0 V, IOUT = 10 mA
3.267
3.333
V
3.325
3.365
V
12
mV
15
mV
25
mV
TA = 25° C
4.75 V ≤ VIN ≤ 18 V,
•
10 mA ≤ IOUT ≤ ILMIN
Line Regulation
∆VOUT
4.5V ≤ VIN ≤ 18 V,
(Note 1)
∆VIN
IOUT = 0 A
Load Regulation
∆VOUT
VIN = 5.0 V, 0A ≤ IOUT ≤ ILMIN
(Note 1)
∆IOUT
TA = 25° C
Dropout Voltage
VDO
IOUT = ILMIN, ∆VREF = 1%
Thermal Regulation
-
30 ms pulse, TA = +25° C
Ripple Rejection
∆VIN
f = 120 Hz, CAdj = 25 µF,
∆VOUT
COUT = 25 µF (tantalum), IOUT = ILMIN,
VIN = 5.0 V, 0A ≤ IOUT ≤ ILMIN
•
•
•
•
1.5
V
0.04
%/W
60
dB
VIN = 6.3 V
Quiescent Current
IQ
VIN = 18 V
Current Limit
IL
OM7670NK, VIN = 18 V
OM7670NM/ST/SM VIN = 18 V
OM7670N2, VIN = 18 V
OM7671NK, VIN = 18 V
OM7671NM/ST/SM, VIN = 18 V
VIN = 28 V, All Types
Temperature Stability
∆VOUT
(Note 2)
∆T
Long Term Stability
∆VOUT
(Note 2)
∆T
•
•
•
•
•
•
•
10
1.5
1.3
2.5
.75
1.50
3.0
5.0
2.6
4.5
.050
mA
3.5
A
--
A
-55° C ≤ TJ ≤ +125° C
1.55
%
TA = +125° C, t = 1000 hrs
1.0
%
Notes:
3.3
1. Line and Load Regulation are measured at a constant junction temperature using a low duty cycle pulse technique.
Although power dissipation is internally limited, regulation is guaranteed up to the maximum power dissipation of 15W
for the OM7670 series and 30 watts for the OM7671 series (See Table 1). Power dissipation is determined by the
input/output differential voltage and the output current. Guaranteed maximum power dissipation will not be available over
the full input/output voltage range.
2. Guaranteed by design, characterization or correlation to other tested parameters.
3. The • denotes the specifications which apply over the full operating temperature range.
OM7670 Series
OM7671 Series
MECHANICAL OUTLINES
.425
.420
.410
1
.100
3
.200
.425
.035 WIDE
FLAT 3 PLCS.
2
.140
.140
.075
.075
1
.157
.350 MIN.
2
.030
MIN.
.665
.645
.150
.140
± .020
.115
.537
.527
1 2 3
.160
.020
.415
3
.080
OM7670SM/OM7671SM
.750
.500
Pin Out
.062
.375
Pin 1
Pin 2
Pin 3
OM7670NM/OM7671NM
BOTTOM VIEW
Ground
Vin
Vout
Pin Out
Pin 1
Pin 2
Pin 3
OM7670ST/OM7671ST
Vin
Ground
Vout
Pin Out
Pin 1
Pin 2
Pin 3
.090
MAX.
.450
SQ.
.02 x 45°
.05 X 45°
MAX. 3 PLCS.
SIDE
4
1
.305
SQ.
0.450
0.250
18
0.312
MIN.
1
2
3
4
5
6
7
8
9
10
Input
Adjust
Adjust
Output
Output
Output
Output
Output
Output
Output
Pin
Pin
Pin
Pin
Pin
Pin
Pin
Pin
Pin
Pin
11
12
13
14
15
16
17
18
19
20
Output
Output
Adjust
Adjust
Input
Input
Input
Input
Input
Input
0.875
MAX.
0.675
0.655
0.188 R.
MAX.
0.135
MAX.
SEATING
PLANE
.009 R. BOTTOM
28 PLCS.
OM7670N2
Pin
Pin
Pin
Pin
Pin
Pin
Pin
Pin
Pin
Pin
1.177
.050
24 PLCS
12
26
Ground
Vout
Vin
1.197
1.53
REF.
.300
4 PLCS.
.035
PIN 1
PIN 28
TOP
.100 TYP.
.035
.025
0.225
0.205
0.043
0.038
0.161
0.151
0.440
0.420
0.525 R.
MAX.
2 PLCS.
OM7670NK/OM7671NK
Pin
Pin
Pin
Pin
Pin
Pin
Pin
Pin
21
22
23
24
25
26
27
28
Input
Input
Input
Input
Input
Input
Input
Input
Pin 1 Pin 2 Case -
Input
Output
Adjust
For more information on any of these mechanical outlines, please visit our web site at:
www.omnirel.com