SM5T WIDEBAND LOAD INSENSITIVE MIXER • • • • • • LO 50 TO 5000 MHz RF 50 TO 5000 MHz IF 50 TO 3000 MHz LO DRIVE +10 dBm (NOMINAL) INSENSITIVE TO SYSTEM LOAD MISMATCH HIGH INTERCEPT: +18 dBm (TYP.) Specifications (Rev. Date: 4/02)* Characteristics Typical SSB Conversion Loss & SSB Noise Figure (max.) fL 1.5 to 3.0 GHz fR 0.05 to 1.5 GHz fR 1.5 to 3.0 GHz fL 1.5 to 3.0 GHz fR 3.0 to 5.0 GHz fl 3.0 to 5.0 GHz Isolation (min.) L to R fL = 0.05 to 1.0 GHz, fL = 1.0 to 5.0 GHz L to I fL = 0.05 to 1.0 GHz fL = 1.0 to 5.0 GHz R to I fR = 0.05 to 5.0 GHz 1 dB Conversion Compression fL @ +10 dBm Input IP3 (min.) fL = 0.05 to 5.0 GHz & fR = 0.05 to 5.0 GHz fI = 0.05 to 3.0 GHz fI 0.05 to 1.5 GHz fI 0.05 to 3.0 GHz fi 0.05 to 3.0 GHz Guaranteed +25°C -40° to +85°C 6.9 dB 7.5 dB 8.5 dB 8.3 dB 8.8 dB 10.5 dB 9.0 dB 9.5 dB 11.2 dB 35 dB 33 dB 25 dB 23 dB 23 dB 21 dB 40 dB 35 dB 32 dB 25 dB 30 dB 23 dB 32 dB +7.0 dBm +18 dBm VSWR R-Port fR = 0.05 to 5.0 GHz L-Port fL = 0.05 to 5.0 GHz 1.8:1 1.6:1 I-Port fI = 0.05 to 3.0 GHz 1.4:1 *Measured in a 50-ohm system with nominal LO drive level and as a downconverter application only, unless otherwise specified. Absolute Maximum Ratings Operating Temperature Storage Temperature Peak Input Power Peak Input Current Outline Drawing(s) -54°C to +100°C -65°C to +100°C +20 dBm max. at +25°C, +17 dBm at +100°C 50 mA DC Specifications subject to change without notice. • North America: 1-800-366-2266 Visit www.macom.com for complete contact and product information. Package Surface Mount Figure SM5T Model AE