Surface Mount LED, 0128 Series Right Angle Lens The 0128 series lamps are miniature chip type designed for two-way surface mounting. Mounted normally, these lamps can be used as circuit board status indicators or as backlight for switches or key pads. Mounted at right angles these lamps are miniature through the panel indicators. These lamps are available in EIA481 tape and reel packaging with approximately 2000 pcs per reel. 1±0.2 3±0.2 2.0 + 1.0 AA AA AA AA 1.8 1.0 0.4 x 2 1.0 1.0 Suggested pad dimensions for reflow soldering Cathode Marking GENERAL INFORMATION Operating Temperature Range Storage Temperature Range Reflow Soldering Temperature -40 °C to +85 °C -40 °C to +90 °C 260 °C for 5 sec max APPLICATION INFORMATION (ALL RATINGS AT 25 °C AMBIENT) Peak Part No. Emitted Color λ Absolute Maximum Ratings ∆λ Pd If (mA) Ir E/O Characteristics Vf (V) @If=20mA Vr Iv (mcd) @ If=20mA 2Θ1/2 (nM) (nM) (mW) dc 1/10 duty @ 1 khz @Vr=5V (µA) (V) Min Typ Max Min Typ (Deg) ISRC0128 Red 660 20 100 30 200 100 5 – 1.8 2.4 7 15 120 IVRC0128 Orange 640 45 70 25 90 100 5 – 2.0 2.8 4 8 120 IVYC0128 Yellow 585 35 70 25 90 100 5 – 2.0 2.8 2 6 120 IVGC0128 Green 570 30 70 25 90 100 5 – 2.1 2.8 5 11 120 IUGC0128 Green 570 30 70 30 100 100 5 – 2.1 2.8 10 15 120 IUYC0128 Yellow 590 15 70 30 160 100 5 – 2.1 2.8 19 33 120 IUOC0128 Orange 620 18 70 50 160 100 5 – 2.1 2.8 26 46 120 IUBC0128 Blue 428 65 140 30 70 50 5 - 3.8 4.5 17 22 120 IUBC0128-7 Blue 468 26 140 30 70 50 5 - 3.5 4.0 23 29 120 Specifications subject to change without notice. Dimensions are in mm±0.3 unless stated otherwise. *reversed polarity IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 0508 013S-0128 L–2