JDVGC0118 Page 1 of 2 These lamps are miniature chip type designed for surface mounting and measure approximately 2.5 x 3 mm. Chip PART NO. JDVGC0118 Lens Color Material Emitted Color AlGaInP Super Deep-Red GaP Green Water Clear * Specifications subject to change without notice. Dimensions are in mm±0.1 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 0507 JDVGC0118 Page 2 of 2 Absolute Maximum Ratings at Ta = 25 °C Parameter Symbol Rating IF Forward Current Units SDR 25 VG 30 mA Operating Temperature Topr -40 to +85 °C Storage Temperature Tstg -40 to +90 °C Soldering Temperature Tsol 260 (for 5 seconds) °C Power Dissipation Pd Peak Forward Current (Duty 1/10 @ 1KHz) IF (Peak) SDR 60 VG 100 SDR 60 VG 60 VR Reverse Voltage 5 mW mA V Electronic Optical Characteristics Parameter Luminous Intensity Symbol IV Typ. Max. SDR 47 75 — VG 14 21.1 — — 60 — SDR — 650 — VG — 570 — SDR — 639 — VG — 571 — SDR — 20 — VG — 30 — SDR — 2.0 2.4 VG 1.7 2.1 2.4 — — 10 2θ1/2 Viewing Angle Peak Wavelength λp Dominant Wavelength λd Spectrum Radiation Bandwidth ∆λ Forward Voltage VF Reverse Current Min. IR Units Condition mcd IF = 20 mA deg IF = 20 mA nm IF = 20 mA nm IF = 20 mA nm IF = 20 mA V IF = 20 mA µA VR = 5 V * Specifications subject to change without notice. Dimensions are in mm±0.1 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 0507