+105°C 7mm Height Low Profile Radial Lead Aluminum Electrolytic Capacitors PGM For all long life general purpose applications FEATURES Very Small Size Capacitance range: 0.1 µF to 100 µF Voltage range: 6.3 WVDC to 50 WVDC Solvent tolerant end seals standard SPECIFICATIONS Capacitance Tolerance ±20% at 120Hz, 20°C Operating Temperature Range -55°C to +105°C Dissipation Factor 120Hz 20°C Impedance Ratio (Max.) @120Hz Leakage Current WVDC 6.3 10 16 25 35 50 tan δ .24 .20 .16 .14 .12 .10 WVDC 6.3 10 16 25 35 50 -25°C/20°C 3 2 2 2 2 2 -40°C/20°C 6 5 4 3 3 3 WVDC ≤50 WVDC Time 2 minutes .01 CV or 3 µA whichever is greater 1,000 hours at 105°C with rated WVDC Load Life Capacitance change Dissipation factor Leakage current < 20% of initial measured value <200% of initial specified value <Initial specified value 1,000 hours at 105°C with no voltage applied. Units will meet load life specification. Shelf Life Frequency (Hz) Ripple Current Multipliers 50 0.8 120 1.0 SPECIAL ORDER OPTIONS • Special tolerances: ±10% (K), -10% + 30% (Q) 400 1.3 1K 1.45 Temperature (°C) 10K 1.65 100K 1.7 +105 1.0 +85 1.4 +65 1.75 (See pages 33 thru 37) • Tape and Reel/Ammo-Pack • Cut, Formed, Cut and Formed, and Snap In Leads ® 3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com PGM + 105°C 7mm Height Low Profile Aluminum Electrolytic Capacitors STANDARD PART LISTING Maximum ESR Ω 120Hz,+20°C Maximum ESR Ω 120Hz,+20°C Maximum RMS Ripple Current (mA) 120Hz,+105°C Dimension DxL (mm) Capacitance (µF) WVDC 104PGM050M 1657.86 1 4x7 10 50 106PGM050M 16.579 41 6.3x7 50 224PGM050M 753.57 2.2 4x7 22 6.3 226PGM6R3M 18.086 32 4x7 50 334PGM050M 502.38 3.3 4x7 22 16 226PGM016M 12.057 43 5x7 0.47 50 474PGM050M 352.74 5 4x7 22 35 226PGM035M 9.043 54 6.3x7 1.0 50 105PGM050M 165.79 10 4x7 22 50 226PGM050M 7.536 65 8x7 Capacitance (µF) WVDC 0.1 50 0.22 0.33 PART NUMBER PART NUMBER Maximum RMS Ripple Current (mA) 120Hz,+105°C Dimension DxL (mm) 2.2 50 225PGM050M 75.357 16 4x7 33 10 336PGM010M 10.048 48 5x7 3.3 50 335PGM050M 50.238 20 4x7 33 25 336PGM025M 7.033 62 6.3x7 4.7 35 475PGM035M 42.328 22 4x7 33 35 336PGM035M 6.029 72 8x7 4.7 50 475PGM050M 35.274 27 5x7 47 6.3 476PGM6R3M 8.466 52 5x7 6.3x7 6.8 25 685PGM025M 34.132 27 4x7 47 16 476PGM016M 5.644 69 6.8 35 685PGM035M 29.256 30 5x7 47 25 476PGM025M 4.938 78 8x7 6.8 50 685PGM050M 24.380 40 6.3x7 100 6.3 107PGM6R3M 3.979 82 6.3x7 10 16 106PGM016M 26.526 27 4x7 220 10 227PGM010M 1.507 140 8x7 10 35 106PGM035M 19.894 34 5x7 PHYSICAL DIMENSIONS 25 (32) 35 (44) PVC SLEEVE 50 (63) 15.0 MIN d 0.1 4x7 .22 4x7 .33 4x7 .47 4x7 1.0 4x7 2.2 4x7 S1 19.0 MIN L1 + 3.3 - 16 (20) 10 (13) 6.3 (8) WVDC (SV) (µF) D1 4x7 4.7 4x7 5x7 5x7 6.3x7 4x7 5x7 6.3x7 5x7 6.3x7 8x7 6.8 4x7 10 22 4x7 33 5x7 47 5x7 100 6.3x7 220 6.3x7 6.3x7 8x7 LEAD INFORMATION V.S. CASE DIAMETER D 4 5 6.3 8 S 1.5 2.0 2.5 3.5 d .45 .45 .45 .50 L1≤ L+1.0mm Max. D1=D+0.5mm Max. S1= S± 0.5mm 8x7 8x7 Convert to inches, divide by 25.4 DxL(mm) ® 3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com