+105°C Low Impedance Radial Lead Aluminum Electrolytic Capacitors KXM For switching regulators and extended life applications FEATURES High Ripple Current High Frequency Extended Life Voltage Range: 6.3 WVDC to 100 WVDC Capacitance Range: .47 µF to 15000 µF SPECIFICATIONS Capacitance Tolerance ±20% at 120Hz, 20°C Operating Temperature Range -55°C to + 105°C Dissipation Factor 120Hz, 20°C WVDC 6.3 10 16 25 35 50 63 100 tan δ .22 .19 .16 .14 .12 .1 .08 .08 Note: For above D.F. specifications, add .02 for every 1,000 µF above 1,000 µF Impedance Ratio (Max.) @120Hz Leakage Current WVDC 6.3 10 16 25 35 50 63 100 -25°C/20°C 2 2 2 2 2 2 2 2 -40°C/20°C 3 3 3 3 3 3 3 3 WVDC < 100 WVDC Time 2 minutes .01 CV or 3µA whichever is greater 5000 hours at +105°C with rated WVDC and rated ripple current (4000 hours for D=10, 3000 hours for D=8, 2000 hours for D≤6.3) Load Life Capacitors will meet the requirements listed below. ≤ 25% of initial measured value ≤ 200% of initial specified value ≤100% of specified value Capacitance change Dissipation factor Leakage current 1,000 hours at +105°C with no voltage applied. Units will meet load life specifications Shelf Life Temperature (°C) Frequency (Hz) Capacitance (µF) Ripple Current Multipliers C≤33 50 .45 120 .55 1K .75 100K +105 +85 +70 .91 1.0 1.0 1.41 1.65 1.65 47<C≤330 .60 .70 .85 .95 1.0 1.0 1.41 470<C≤1000 .65 .75 .90 .98 1.0 1.0 1.41 1.65 C>1000 .75 .80 .95 1.0 1.0 1.0 1.41 1.65 SPECIAL ORDER OPTIONS • 10K Special tolerances: ±10% (K), -10% + 30% (Q) (See pages 33 thru 37) • Tape and Reel/Ammo-Pack • Cut, Formed, Cut and Formed, and Snap In Leads ® 3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com 70 KXM +105°C Low Impedance Radial Aluminum Electrolytic Capacitors PHYSICAL DIMENSIONS (µF) WVDC (SV) 6.3 (7.9) 10 (13) 16 (20) 25 (32) 35 (44) 0.47 0.68 1 1.5 2.2 3.3 4.7 6.8 10 12 15 18 22 27 50 (63) 5x11 5x11 5x11 5x11 6.3x11 39 5x11 56 5x11 68 5x11 100 5x11 120 6.3x11 6.3x11 5x11 180 220 6.3x11 8x11.5 270 6.3x11 8x11.5 10x12.5 8x15 8x11.5 10x12.5 8x15 10x16 8x20 10x12.5 8x15 10x16 8x20 10x20 390 470 8x11.5 680 820 8x15 1000 10x12.5 1200 1500 10x16 8x20 10x20 1800 2200 10x25 2700 3300 12.5x20 3900 4700 12.5x25 12.5x31.5 5600 6800 10000 15000 12.5x35.5 16x25 16x31.5 18x35.5 10x25 10x16 8x20 10x20 10x20 12.5x20 10x25 12.5x20 10x25 12.5x20 12.5x25 12.5x31.5 12.5x35.5 16x25 12.5x31.5 16x25 12.5x25 12.5x35.5 16x31.5 16x25 12.5x31.5 16x25 12.5x35.5 16x31.5 18x35.5 16x25 16x25 16x31.5 18x35.5 18x35.5 18x40 18x40 12.5x20 12.5x25 6.3x11 6.3x11 82 560 6.3x15 6.3x15 47 330 5x11 5x11 6.3x11 6.3x11 6.3x11 6.3x11 6.3x11 8x11.5 10x12.5 8x15 6.3x11 8x11.5 10x12.5 8x15 10x15 8x20 8x11.5 10x20 12.5x15 8x15 10x20 12.5x15 8x11.5 10x12.5 10x25 12.5x15 8x20 10x31.5 16x15 10x12.5 10x16 12.5x20 8x15 16x15 8x20 10x20 12.5x25 18x15 10x16 10x25 12.5x25 18x15 12.5x31.5 16x20 10x20 12.5x20 12.5x35.5 16x25 10x25 12.5x25 12.5x40 18x20 12.5x20 12.5x31.5 16x31.5 18x25 12.5x35.5 16x35.5 18x31.5 12.5x25 16x25 16x40 18x35.5 12.5x31.5 16x31.5 18x40 12.5x35.5 16x25 16x25 16x31.5 16x35.5 18x35.5 18x40 100 (125) 5x11 5x11 5x11 5x11 5x11 5x11 6.3x11 6.3x11 6.3x11 6.3x11 6.3x15 6.3x15 8x11.5 10x12.5 8x15 10x12.5 8x15 10x15 8x20 10x20 12.5x15 10x20 12.5x15 10x25 12.5x15 10x31.5 16x15 10x31.5 16x15 12.5x25 16x15 12.5x25 18x15 12.5x31.5 16x20 12.5x35.5 16x25 12.5x40 18x20 16x31.5 18x25 16x35.5 18x31.5 16x40 18x35.5 18x35.5 Aluminum Electrolytic 33 150 63 (79) 18x40 18x35.5 D x L (mm) ® 3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com 71 KXM +105°C Low Impedance Radial Aluminum Electrolytic Capacitors STANDARD PART LISTING Capacitance WVDC (µF) PART NUMBER Maximum ESR Ω 120Hz, +20°C Impedance Ω +20°C/-10°C 100kHz Maximum RMS Dimensions Ripple Current DxL (mA) +105°C (mm) 100kHz Capacitance WVDC (µF) PART NUMBER Maximum ESR Ω 120Hz, +20°C Impedance Ω +20°C/-10°C 100kHz Maximum RMS Dimensions Ripple Current DxL (mA) +105°C (mm) 100kHz 0.47 100 474KXM100M 282.190 45/121.5 20 5x11 68 16 686KXM016M 3.901 0.5/1.25 180 5x11 0.68 100 684KXM100M 195.043 25/67.5 24 5x11 68 35 686KXM035M 2.926 0.397/0.991 280 6.3x11 686KXM050M 1 100 105KXM100M 132.629 17/46 26 5x11 68 50 2.438 0.352/0.88 380 8x11.5 1.5 100 155KXM100M 88.419 10/27 33 5x11 68 100 686KXM100MNP 1.950 0.25/0.675 465 12.5x15 2.2 100 225KXM100M 60.286 6.8/18.36 45 5x11 82 63 1.617 0.16/0.32 580 10x15 3.3 100 335KXM100M 40.191 4.15/11.205 55 5x11 82 63 826KXM063MJU 1.617 0.17/0.34 600 8x20 4.7 50 475KXM050M 35.274 1.699/5.096 80 5x11 82 100 1.617 0.2/0.54 610 10x31.5 4.7 100 475KXM100M 28.219 3/8.1 70 6.3x11 82 100 826KXM100MQP 1.617 0.21/0.567 680 16x15 6.8 100 685KXM100M 19.504 2/5.4 85 6.3x11 100 10 107KXM010M 3.150 0.3/1 250 5x11 10 50 106KXM050M 16.579 1.331/3.992 110 5x11 100 25 107KXM025M 2.321 0.13/0.41 405 6.3x11 10 63 106KXM063M 13.263 1.08/2.16 137 5x11 100 50 107KXM050M 1.658 0.074/0.22 724 8x11.5 10 100 106KXM100M 13.263 1.25/3.375 106 6.3x11 100 63 107KXM063M 1.326 0.13/0.26 748 10x20 12 63 126KXM063M 11.052 0.95/1.9 148 5x11 100 63 107KXM063MNP 1.326 0.15/0.3 700 12.5x15 12 100 126KXM100M 11.052 1/2.7 115 6.3x11 100 100 1.326 0.16/0.432 660 10x31.5 15 63 156KXM063M 8.842 0.75/1.5 185 6.3x11 100 100 107KXM100MQP 1.326 0.18/0.486 715 16x15 15 100 156KXM100M 8.842 0.82/2.214 132 6.3x15 120 16 127KXM016M 2.210 0.13/0.41 405 6.3x11 826KXM063M 826KXM100M 107KXM100M 18 63 186KXM063M 7.368 0.64/1.28 198 6.3x11 120 50 127KXM050M 1.382 0.061/0.18 950 8x15 18 100 186KXM100M 7.368 0.69/1.863 155 6.3x15 120 63 127KXM063M 1.105 0.11/0.22 820 10x20 22 50 226KXM050M 7.536 0.34/1.18 238 5x11 120 63 127KXM063MNP 1.105 0.125/0.15 755 12.5x15 22 63 226KXM063M 6.029 0.53/1.06 220 6.3x11 120 100 1.105 0.135/0.351 770 12.5x25 22 100 226KXM100M 6.029 0.57/1.54 230 8x11.5 120 100 127KXM100MQP 1.105 0.15/0.405 795 16x15 27 63 276KXM063M 4.912 0.43/0.86 240 6.3x11 150 6.3 157KXM6R3M 2.432 0.3/1 250 5x11 27 100 276KXM100M 4.912 0.5/1.4 270 10x12.5 150 35 157KXM035M 1.326 0.072/0.22 760 8x11.5 27 100 276KXM100MJP 4.912 0.48/1.3 280 8x15 150 50 157KXM050M 1.105 0.061/0.18 979 10x12.5 33 35 336KXM035M 6.029 0.3/1 250 5x11 150 63 157KXM063M 0.884 0.092/0.184 940 10x25 33 50 336KXM050M 5.024 0.564/1.411 230 6.3x11 150 63 157KXM063MNP 0.884 0.095/0.19 847 12.5x15 127KXM100M 33 63 336KXM063M 4.019 0.36/0.72 308 6.3x15 150 100 0.884 0.12/0.324 800 12.5x25 33 100 336KXM100M 4.019 0.44/1.19 295 10x12.5 150 100 157KXM100MRP 0.884 0.13/0.351 915 18x15 33 100 336KXM100MJP 4.019 0.4/1.08 300 8x15 180 50 187KXM050M 0.921 0.046/0.14 1190 8x20 39 63 396KXM063M 3.401 0.31/0.62 325 6.3x15 180 63 187KXM063M 0.737 0.077/0.154 1100 10x31.5 396KXM100M 39 100 39 100 396KXM100MJU 47 25 476KXM025M 4.938 0.3/1 47 50 476KXM050M 3.527 0.453/1.132 157KXM100M 3.401 0.38/1.03 340 10x15 180 63 187KXM063MQP 0.737 0.082/0.164 1025 16x15 3.401 0.34/0.92 350 8x20 180 100 0.737 0.1/0.27 900 12.5x31.5 250 5x11 180 100 187KXM100MQU 0.737 0.11/0.3 995 16x20 270 6.3x11 220 10 227KXM010M 1.432 0.13/0.41 405 6.3x11 227KXM025M 187KXM100M 47 63 476KXM063M 2.822 0.26/0.52 370 8x11.5 220 25 1.055 0.072/0.22 760 8x11.5 47 100 476KXM100M 2.822 0.3/0.81 420 10x20 220 35 227KXM035MLN 0.904 0.128/0.319 630 10x12.5 47 100 476KXM100MNP 2.822 0.33/0.89 400 12.5x15 220 35 227KXM035M 0.904 0.056/0.17 995 8x15 56 16 4.737 0.3/1 250 5x11 220 50 227KXM050M 0.754 0.042/0.12 1370 10x16 227KXM063M 12.5x20 566KXM016M 56 35 566KXM035M 3.553 0.13/0.41 405 6.3x11 220 63 0.603 0.067/0.134 1145 56 50 566KXM050M 2.960 0.14/0.5 385 6.3x11 220 63 227KXM063MQP 0.603 0.072/0.144 1125 16x15 56 63 566KXM063M 2.368 0.24/0.48 445 10x12.5 220 100 0.603 0.088/0.238 1000 12.5x35.5 56 63 566KXM063MJP 2.368 0.22/0.44 460 8x15 220 100 227KXM100MQV 0.603 0.094/0.254 1150 16x25 56 100 566KXM100M 2.368 0.25/0.675 455 10x20 270 35 277KXM035M 0.737 0.041/0.13 1250 8x20 56 100 566KXM100MNP 2.368 0.29/0.78 430 12.5x15 270 50 277KXM050M 0.614 0.03/0.09 1580 10x20 227KXM100M ® 3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com 72 KXM +105°C Low Impedance Radial Aluminum Electrolytic Capacitors STANDARD PART LISTING Capacitance WVDC (µF) PART NUMBER Maximum ESR Ω 120Hz, +20°C Impedance Ω +20°C/-10°C 100kHz Maximum RMS Dimensions Ripple Current DxL (mA) +105°C (mm) 100kHz Capacitance WVDC (µF) PART NUMBER Maximum ESR Ω 120Hz, +20°C Impedance Ω +20°C/-10°C 100kHz Maximum RMS Dimensions Ripple Current DxL (mA) +105°C (mm) 100kHz 63 277KXM063M 0.491 0.056/0.112 1350 12.5x25 680 63 687KXM063MRV 0.195 0.036/0.072 1950 18x25 270 63 277KXM063MRP 0.491 0.06/0.12 1300 18x15 680 100 687KXM100M 0.195 0.038/0.103 2300 18x40 270 100 277KXM100M 0.491 0.074/0.2 1110 12.5x40 820 6.3 827KXM6R3M 0.445 0.056/0.17 995 8x15 270 100 277KXM100MRU 0.491 0.082/0.221 1225 18x20 820 25 827KXM025M 0.283 0.022/0.066 2150 10x25 330 6.3 337KXM6R3M 1.105 0.13/0.41 405 6.3x11 820 50 827KXM050M 0.202 0.019/0.051 3960 12.5x35.5 330 16 337KXM016M 0.804 0.072/0.22 760 8x11.5 820 63 827KXM063M 0.162 0.03/0.06 2225 16x35.5 330 25 337KXM025MLN 0.703 0.108/0.27 700 10x12.5 820 63 827KXM063MRW 0.162 0.032/0.064 2100 18x31.5 330 25 337KXM025M 0.703 0.056/0.17 995 8x15 1000 6.3 108KXM6R3M 0.365 0.053/0.16 1030 10x12.5 330 35 337KXM035M 0.603 0.038/0.12 1430 10x16 1000 10 108KXM010MLQ 0.315 0.063/0.158 1030 10x16 330 50 337KXM050M 0.502 0.028/0.085 1870 10x25 1000 10 108KXM010M 0.315 0.041/0.13 1250 8x20 330 63 337KXM063M 0.402 0.05/0.1 1425 12.5x25 1000 16 108KXM016M 0.265 0.023/0.069 1820 10x20 330 63 337KXM063MRP 0.402 0.051/0.102 1400 18x15 1000 25 108KXM025M 0.199 0.021/0.053 2360 12.5x20 330 100 337KXM100M 0.402 0.065/0.176 1520 16x31.5 1000 35 108KXM035M 0.199 0.018/0.045 2770 12.5x25 330 100 337KXM100MRV 0.402 0.072/0.194 1425 18x25 1000 50 108KXM050M 0.166 0.021/0.056 3010 16x25 390 63 397KXM063M 0.340 0.044/0.088 1625 12.5x31.5 1000 63 108KXM063M 0.133 0.028/0.056 2375 16x40 390 63 397KXM063MQU 0.340 0.047/0.094 1500 16x20 1000 63 108KXM063MRY 0.133 0.03/0.06 2280 18x35.5 390 100 397KXM100M 0.340 0.055/0.149 1725 16x35.5 1200 6.3 128KXM6R3MLQ 0.332 0.058/0.144 1090 10x16 390 100 397KXM100MRW 0.340 0.063/0.17 1600 18x31.5 1200 6.3 128KXM6R3M 0.332 0.041/0.13 1250 8x20 470 10 477KXM010M 0.670 0.072/0.22 760 8x11.5 1200 10 128KXM010M 0.290 0.023/0.069 1820 10x20 470 16 477KXM016MLN 0.564 0.093/0.233 660 10x12.5 1200 16 128KXM016M 0.249 0.022/0.066 2150 10x25 470 16 477KXM016M 0.564 0.056/0.17 995 8x15 1200 25 128KXM025M 0.221 0.05/0.124 1730 12.5x20 470 25 477KXM025MLQ 0.494 0.088/0.221 920 10x16 1200 35 128KXM035M 0.193 0.016/0.041 3290 12.5x31.5 470 25 477KXM025M 0.494 0.041/0.13 1250 8x20 1200 50 128KXM050M 0.138 0.042/0.083 2710 16x31.5 470 35 477KXM035M 0.423 0.023/0.069 1820 10x20 1200 63 128KXM063M 0.138 0.026/0.052 2500 18x40 470 50 477KXM050M 0.353 0.027/0.068 2050 12.5x20 1500 6.3 158KXM6R3M 0.265 0.023/0.069 1820 10x20 470 63 477KXM063M 0.282 0.04/0.08 1785 12.5x35.5 1500 10 158KXM010M 0.232 0.022/0.066 2150 10x25 470 63 477KXM063MQV 0.282 0.042/0.084 1700 16x25 1500 16 158KXM016M 0.199 0.021/0.053 2360 12.5x20 470 100 477KXM100M 0.282 0.049/0.132 1920 16x40 1500 25 158KXM025M 0.177 0.018/0.045 2770 12.5x25 470 100 477KXM100MRY 0.282 0.056/0.157 1775 18x35.5 1500 35 158KXM035M 0.155 0.015/0.039 3400 12.5x35.5 560 6.3 567KXM6R3M 0.651 0.072/0.22 760 8x11.5 1500 35 158KXM035MQV 0.155 0.04/0.079 2250 16x25 560 35 567KXM035M 0.355 0.022/0.066 2150 10x25 1500 50 158KXM050M 0.133 0.035/0.071 3010 16x35.5 560 50 567KXM050M 0.296 0.023/0.059 2410 12.5x25 1800 25 188KXM025M 0.147 0.016/0.041 3290 12.5x31.5 560 63 567KXM063M 0.237 0.036/0.072 1950 12.5x40 1800 35 188KXM035M 0.129 0.016/0.043 3460 16x25 560 63 567KXM063MRU 0.237 0.04/0.08 1725 18x20 2200 6.3 228KXM6R3M 0.196 0.022/0.066 2150 10x25 560 100 567KXM100M 0.237 0.043/0.116 2050 18x35.5 2200 10 228KXM010M 0.173 0.021/0.053 2360 12.5x20 680 10 687KXM010MLN 0.463 0.077/0.194 760 10x12.5 2200 16 228KXM016M 0.151 0.018/0.045 2770 12.5x25 680 10 687KXM010M 0.463 0.056/0.17 995 8x15 2200 25 228KXM025M 0.136 0.015/0.039 3400 12.5x35.5 680 16 687KXM016MLQ 0.390 0.074/0.184 880 10x16 2200 25 228KXM025MQV 0.136 0.032/0.065 2390 16x25 680 16 687KXM016M 0.390 0.041/0.13 1250 8x20 2200 35 228KXM035M 0.121 0.031/0.077 2880 16x31.5 680 25 687KXM025M 0.341 0.023/0.069 1820 10x20 2200 50 228KXM050M 0.106 0.027/0.055 3690 18x35.5 680 35 687KXM035M 0.293 0.021/0.053 2360 12.5x20 2700 16 278KXM016M 0.123 0.016/0.041 3290 12.5x31.5 680 50 687KXM050M 0.244 0.021/0.052 2860 12.5x31.5 2700 25 278KXM025M 0.111 0.016/0.043 3460 16x25 680 63 687KXM063M 0.195 0.033/0.066 2050 16x31.5 3300 6.3 338KXM6R3M 0.141 0.021/0.053 2360 12.5x20 Aluminum Electrolytic 270 ® 3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com 73 KXM +105°C Low Impedance Radial Aluminum Electrolytic Capacitors STANDARD PART LISTING PART NUMBER Capacitance WVDC (µF) Maximum ESR Ω 120Hz, +20°C Impedance Ω +20°C/-10°C 100kHz Maximum RMS Dimensions Ripple Current DxL (mA) +105°C (mm) 100kHz PART NUMBER Capacitance WVDC (µF) Maximum ESR Ω 120Hz, +20°C Impedance Ω +20°C/-10°C 100kHz Maximum RMS Dimensions Ripple Current DxL (mA) +105°C (mm) 100kHz 3300 10 338KXM010M 0.126 0.018/0.045 2770 12.5x25 4700 16 478KXM016M 0.085 0.024/0.048 2670 16x31.5 3300 16 338KXM016M 0.111 0.015/0.039 3400 12.5x35.5 4700 25 478KXM025M 0.078 0.023/0.046 3700 18x35.5 3300 16 338KXM016MQV 0.111 0.029/0.057 2200 16x25 5600 6.3 568KXM6R3M 0.095 0.015/0.039 3400 12.5x35.5 3300 25 338KXM025M 0.100 0.027/0.054 3020 16x31.5 5600 10 568KXM010M 0.086 0.016/0.043 3460 16x25 3300 35 338KXM035M 0.090 0.026/0.064 3650 18x35.5 6800 6.3 688KXM6R3M 0.083 0.016/0.043 3460 16x25 3300 50 338KXM050M 0.080 0.023/0.046 4350 18x40 6800 10 688KXM010M 0.076 0.023/0.045 2850 16x31.5 3900 6.3 398KXM6R3M 0.119 0.018/0.045 2770 12.5x25 6800 16 688KXM016M 0.068 0.022/0.043 3280 18x35.5 3900 10 398KXM010M 0.106 0.016/0.041 3290 12.5x31.5 10000 6.3 109KXM6R3M 0.055 0.022/0.043 3000 16x31.5 3900 16 398KXM016M 0.094 0.016/0.043 3460 16x25 10000 10 109KXM010M 0.061 0.021/0.041 3430 18x35.5 4700 6.3 478KXM6R3M 0.106 0.016/0.041 3290 12.5x31.5 10000 16 109KXM016M 0.060 0.019/0.039 3670 18x40 4700 10 478KXM010M 0.095 0.015/0.039 3400 12.5x35.5 15000 6.3 159KXM6R3M 0.048 0.02/0.041 3610 18x35.5 4700 10 478KXM010MQV 0.095 0.025/0.051 2350 16x25 15000 10 159KXM010M 0.052 0.019/0.039 3850 18x40 LEAD INFORMATION V.S. CASE DIAMETER 15.0 MIN PVC SLEEVE d - D1 S1 5.0 6.3 8.0 10.0 12.5 16.0 18.0 d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 S 2.0 2.5 3.5 5.0 5.0 7.5 7.5 L1=L + 2.0 Max. D1=D + 0.5 mm Max. S1=S ± 0.5 mm Max. 19.0 MIN L1 + D NOTE: Case Vent is standard on all diameter ≥8.0mm ® 3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com 74