SAW Bandpass Filter F1G71 Features l K-PCS applications l Usable bandwidth of 30 MHz l No impedance matching require for operation at 50 Ω l Ceramic Surface Mounted Device Package ( 3.0 mm × 3.0 mm ) l Single-ended Operation l RoHS Compliant Package Dimensions 1 2 I 1G71 3 6 6 1 5 5 2 4 4 3 Dimensions shown are nominal in millimeters Pin Configurations Body : Al2O3 Ceramic Lid : Kovar, Ni Plated Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um Ni Plating 2 Input 5 Output 1, 3, 4, 6 Case ground Maximum Ratings Parameters Unit Minimum Typical Maximum Operating Temperature Range °C -30 25 85 Storage Temperature Range °C -30 - 85 Power Handling Capability dBm - - - Electrostatics Sensitive Device (ESD) I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F1G71 Rev. Date 2008-03-05 Rev. NF7001-AS01 1/7 SAW Bandpass Filter F1G71 Specifications Minimum Typical Maximum Unit Center Frequency ( Fc ) - 1765.0 - MHz Insertion Loss (In Fc +/- 15.0 MHz) - 1.7 3.0 dB Amplitude Ripple (In Fc +/- 15.0 MHz) - 0.4 1.2 dBp-p VSWR (In Fc +/- 15.0 MHz) - 1.6 2.0 1350.0 MHz ~ 1380.0 MHz 30.0 36.0 - 1660.0 MHz ~ 1690.0 MHz 28.0 34.0 - 1840.0 MHz ~ 1870.0 MHz 30.0 44.0 - 2150.0 MHz ~ 2180.0 MHz 30.0 44.0 - -30 25 85 ℃ - - - dBm Relative Attenuation Temperature Range (Operational) Input RF Power (In Fc +/- 30.0 MHz) Input/Output Impedance dB 50 Ohms Notes : 1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and full 2 port calibration. 2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 3) All attenuation measurements are measured relative to insertion loss I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F1G71 Rev. Date 2008-03-05 Rev. NF7001-AS01 2/7 SAW Bandpass Filter F1G71 Matching Schematic ( Actual matching values may vary due to PCB layout and parasitics ) Input 50Ω Output 50Ω Marking Configuration 1) I2) 1G713) 1) Pad Number 1 Index 2) Manufacturer name 3) Marking Number * Ink or Laser Marking available I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F1G71 Rev. Date 2008-03-05 Rev. NF7001-AS01 3/7 SAW Bandpass Filter F1G71 Typical Performance ( at 25℃ ) CH1 S21 LOG 3 May 2007 19:48:06 1:-2 . 0643 dB 1 765. 000 000 MHz 10 dB/ REF -2 dB CH1Markers 1 2:-58 . 772 dB 1. 69000 GHz Cor 3:-53 . 279 dB 1. 84000 GHz 3 2 CENTER1 765. 000 000 MHz CH1 S21 LOG SPAN 500. 000 000 MHz 3 May 2007 20:40:09 1:-1 . 7897 dB 1 765. 000 000 MHz 10 dB/ REF -2 dB CH1 PASS CH1Markers 1 2:-55 . 998 dB 1. 69000 GHz Cor 3:-58 . 888 dB 1. 84000 GHz 2 3 START . 010 000 MHz I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 STOP3 000. 000 000 MHz Part No. F1G71 Rev. Date 2008-03-05 Rev. NF7001-AS01 4/7 SAW Bandpass Filter F1G71 Input / Output VSWR Charts CH1 S11 SWR 1 / 3 May 2007 19:48:55 1: 1. 4803 1 765. 000 000 MHz REF 1 CH1 S22 SWR 1 / 2 3 May 2007 19:49:13 1: 1. 5239 1 765. 000 000 MHz REF 1 2 3 3 CH1 Markers 2: 38. 023 1. 69000 GHz Cor CH1 Markers 2: 52. 119 1. 69000 GHz Cor 3: 10. 763 1. 84000 GHz 3: 11. 747 1. 84000 GHz 1 1 CENTER1 765. 000 000 MHz SPAN 500. 000 000 MHz CENTER1 765. 000 000 MHz SPAN 500. 000 000 MHz Input / Output Smith Charts CH1 S11 1 U FS 1: 36. 891 10. 738 3 May 2007 19:49:02 968. 30 pH 1 765. 000 000 MHz CH1 S22 1 U FS 1: 36. 262 3 May 2007 19:49:22 1. 0608 nH 1 765. 000 000 MHz 11. 764 2 2 CH1 Markers 2: 3. 1797 60. 559 1. 69000 GHz Cor CH1 Markers 2: 2. 1973 56. 379 1. 69000 GHz Cor 3: 4. 8281 10. 084 1. 84000 GHz 3: 4. 4893 11. 661 1. 84000 GHz 3 3 1 1 CENTER1 765. 000 000 MHz SPAN 500. 000 000 MHz I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 CENTER1 765. 000 000 MHz SPAN 500. 000 000 MHz Part No. F1G71 Rev. Date 2008-03-05 Rev. NF7001-AS01 5/7 SAW Bandpass Filter F1G71 Packing Specification 1. Reeling Quantity : 3000 pcs / 13” reel ( or 1000 pcs / 7” reel ) 2. Taping Structure : The tape shall be wound around the reel in the direction shown below. TOP COVER TAPE REEL CARRIER TAPE Tape Specification 1. Leader part and vacant position specification Vacant 150mm min. Component contained Vacant 150mm min. Leader part 250mm min. END START Tape Running Direction 2. Tensile strength of carrier tape 4.4N/mm width Direction of pull Top cover tape 3. Top cover tape adhesion 0~15 degree 1) pull off angle : 0~15° 2) speed : 300mm/min 3) force : 20~70g I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Carrier tape Part No. F1G71 Rev. Date 2008-03-05 Rev. NF7001-AS01 6/7 SAW Bandpass Filter F1G71 Carrier Tape Dimensions [unit : mm] A 3.40 ± 0.1 B 3.40 ± 0.1 C 7.25 ± 0.1 D 1.70 ± 0.1 E 12.00 ± 0.1 F 8.00 ± 0.1 Part Direction Tape Running Direction Reel Dimensions [unit : mm] I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F1G71 Rev. Date 2008-03-05 Rev. NF7001-AS01 7/7