Oscillator · JO75 · 2.5 V SMD Oscillator with Stop Function · 7.5 x 5.0 mm RoHS actual size General Data RoHS compliant Pb free: pins / pads Table 1: Frequency Stability Code stability code type JO75 2.5 V frequency range 0.50 ~ 160.0 MHz (15pF max.) 0.50 ~ 50.00 MHz (30pF max.) -10 °C ~ +70 °C frequency stability over all* ± 20ppm ~ ± 50ppm (table 1) -40 °C ~ +85 °C current consumption see table 2 • standard supply voltage VDC 2.5 V ± 5% temperature operating -10 °C ~ +70 °C / -40 °C ~ +85 °C storage -55 °C ~ +125 °C rise & fall time see table 3 load max 15pF / 30pF current max. 4mA / 8mA low level max. 0.1 x VDC high level min. 0.9 x VDC output 2002/95/EC ■ reflow soldering temperature: 260 °C max. ■ ceramic/metal package A B G C ± 100 ppm ± 50 ppm ± 30 ppm ± 25 ppm O O O O O Δ O O available Δ excludes shock and vibration * includes stability at 25 °C, operating temp. range, supply voltage change, shock and vibration, aging 1st year. Table 2: Current Consumption max. Current at 15pF load 0.5 ~ 19.9 MHz 20.0 ~ 49.9 MHz 50.0 ~ 79.9 MHz 80.0 ~ 124.9 MHz 125.0 ~ 160.0 MHz output enable time max. 10ms output disable time max. 150ns start-up time max. 10ms standby function stop standby current max. 10µA phase jitter 12 kHz ~ 20.0 MHz < 1.0ps RMS symmetry at 0.5 x VDC 45% ~ 55% typ. (40% ~ 60% max.) Current at 30pF load 6 mA 11 mA 17 mA 28 mA 38 mA 0.5 ~ 19.9 MHz 20.0 ~ 50.0 MHz 10 mA 20 mA Table 3: Rise & Fall Time max. 8 ns: 0.5 ~ 1.79 MHz 6 ns: 1.8 ~ 49.99 MHz 5 ns: 50.0 ~ 79.99 MHz 4 ns: 80.0 ~ 124.99 MHz 3 ns: 125.0 ~ 160.00 MHz note: - specific data on request - rise time: 0.1 VDC ~ 0.9 VDC - fall time: 0.9 VDC ~ 0.1 VDC Dimensions top view #2 side view 5.08±0.1 #1 4.2±0.1 #4 2.0±0.1 #3 2.54±0.1 #2 1.23±0.12 #1 1.8 max. #3 5.0±0.2 #4 1.8±0.1 1.4±0.1 7.5 max. 5.08±0.1 bottom view pin connection # 1: e/d # 2: ground # 3: output # 4: VDC pad layout in mm Order Information O frequency type Oscillator 0.5 ~ 160.0 MHz JO75 Example: O 20.0-JO75-B-2.5-1 frequency stability code see table 1 supply voltage code output load code option 2.5 = 2.5 V 1 = 15 pF 2 = 30 pF blank = -10 °C ~ +70 °C T1 = -40 °C ~ +85 °C (LF = RoHS compliant / Pb free pads) Jauch Quartz GmbH • e-mail: [email protected] full data can be found under: www.jauch.de / www.jauch.fr / www.jauchusa.com All specifications are subject to change without notice 080709 Oscillator · JO75 · 2.5 V · Stop Function 0.4±0.05 ø 13 2.0 ø 21 ø 1.5±0.1 8.0±0.2 2.3±0.1 5.5 max. 500 pcs per reel in mm Direction of feed Enable / Disable Function Marking frequency type / date code pin #1 (e/d control) pin #3 (output) open use external pull-up resistor high ”1” (VIH ≥ 0.8 VDC) active low ”0” (VIL ≤ 0.2 VDC) high impedance date code: A ~ M: Jan.- Dec. 9: 2009 0: 2010 1: 2011 stop function: • oscillator stops • output high impedance Reflow Soldering Profile temperature (°C) 260 200 Jan. A Febr. B Mar. C Apr. D May E June F July G Aug. H Sept. J Oct. K Nov. L Dec. M Packing Note 10 s max. 260 °C max. 220 ±5 °C 180 ±5 °C – – standard packing units are 500 pieces per reel non-multiple packing units are only supplied taped / bulk 150 100 ø 80 ø 180/255 9.25±0.1 7.9 max. 17.5 120° 16.0±0.3 2.0±0.1 4.0±0.1 1.75±0.1 Taping Specification 60 ~180 s 60 s max. 50 time (s) note: parts are also suitable for soldering systems with lead (Pb) content Jauch Quartz GmbH • e-mail: [email protected] full data can be found under: www.jauch.de / www.jauch.fr / www.jauchusa.com All specifications are subject to change without notice